The rise of groundwater level in slope due to intense rainfall is one of the factors that can trigger slope failure. The groundwater level rise causes increase in the pore water pressure thus reducing the shear resistance of the soil. The purpose of this study is to present a groundwater level evaluation system in response to daily rainfall for slope stability forecasting. The system consists of three important components namely the conceptual multi tank model, unsaturated-saturated seepage flow analysis and stability analysis. The conceptual multi tank model was initially used to determine the fluctuations of groundwater level followed by the unsaturated-saturated seepage flow analysis to determine the pore water pressure distribution in the slope. Finally, the variation in factor of safety for the slope was determined by stability analysis corresponding to the seepage flow results. The performance of the evaluation system was demonstrated using a case study in Putrajaya, Malaysia. From this study, an early warning system can be developed for slope stability which is essential for disaster prevention during rainfall.
Assessment of total sediment load equations on selected Malaysia rivers was done based on 35 sediment loads and hydraulic data. Four rivers were selected to make this assessment which are Sungai Perak, Sungai Kemaman, Sungai Pergau and Sungai Kurau. These rivers can be divided into three categories based on the river width, with Sungai Perak (300-350m) and Sungai Kemaman (150-200m) can categorised as big rivers, meanwhile, Sungai Pergau (30-45m) and Sungai Kurau (10-11m) can categorised as medium and small river respectively. The total sediment load equations used in this assessment are Ackers-White, Brownlie, Engelund-Hansen, Graf, Molinas-Wu, Karim-Kennedy and Yang. This paper also tested the local total sediment load equations by Ariffin and Sinnakaudan et al. to evaluate capabilities of the equations on different rivers in Malaysia. The graphs of the calculated equations versus measured sediment transport rates were plotted to shows the accuracy of the tested equations.
Particle size is the most important parameter to deal in sediment transport processes. This parameter is important to determine the class of sediment transport in river. It is also important for the selection of site for sand mining operation through the determination of the size of sediment, sediment capacity and sediment replenishment rate. Data were obtained through observations made from two rivers namely Sungai Perak and Sungai Kurau in Malaysia. The rivers were categorized as wide river for Sungai Perak and small river for Sungai Kurau. For Sungai Perak, the width of river ranges from 248.18 to 338.53 meter whilst the width of Sungai Kurau ranges from 9 to 11 meter. Data covers flow discharges from 130.988 m3/s to 435.915 m3/s for Sungai Perak and from 2.52 m3/s to 4.723 m3/s for Sungai Kurau. Based on the results, the bed load of two rivers are found to be mostly uniform mixture. The results indicate that these two Malaysian rivers mostly have uniform bed load The bed material for the two rivers are poorly graded mixture and the median size of bed loads mostly ranges from 0.62 to 2.94 mm.
Water security in the water treatment plant has been doubted, and the treatment process may have given unreliable and unsafe water to the public. A newspaper reported on November 19, 2011, that laboratory tests on water samples in Kelantan for each year by the Ministry of Health have found harmful bacteria including Escherichia coli (E. coli) in the water samples. More worryingly, it was stated in a study that chlorine in water treated with high chlorine can be harmful to human health. In 2010, Malaysia has begun to approach a natural treatment technique, namely, riverbank filtration (RBF), and firstly used it at the Water Treatment Plant in Jeli, Kelantan, and Kuala Kangsar, Perak. RBF limitation is the invisible groundwater flow that makes it difficult to predict the transport of contaminants. Managing groundwater is important to ensure that water is aligned in compliance with government legislation and environmental protection. Due to that, this study suggests an implementation of an artificial barrier for microorganism in RBF to sustain the good water quality abstracted from the abstraction well. This pretreatment or purifying method is to improve the effectiveness of RBF in removing pollutants during shock loads and reduce the load placed in the water treatment process.