Activated carbon (AC) has an important role in many life fields. It has high porosity and very useful for gas mixtures separation and purification of air and water. Every application requires specific properties of AC. Characteristics of AC are strongly influenced by raw material and parameters of manufacturing process. This paper is focused to characterize of activated carbons (ACs) derived from swat bamboo (Gigantochloa verticillata) which is manufactured under different carbonization temperatures. Prepared samples of swat bamboo were carbonized by heating variations of 550, 650 and 750°C and held at such temperature for 1 hour. Char yielded is powdered and meshed to maximum grain size of 250um and then physically activated by heating up to 800°C, held for 1 hour by flowing of 150 mL / min nitrogen. The results show that there was an increase in fix carbon and carbon contents from raw material to char and from char to ACs yielded; there were a little bit increase of fix carbon and carbon contents proportional to increasing of carbonization temperature. The maximum fix carbon (74.73%) and C (75.52) were obtained at carbonization temperature of 750°C. SEM observation showed that there has been a change in the morphology microstructure from raw material to activated carbons, wherein the ACs the pores structures clearly can be observed.
1 May 2017 in IOP Conference Series: Materials Science and Engineering
Activated carbon is a versatile porous material that widely applied to purify, deodorize, decolorize, remove or reduce some gases harmful constituents and storage of gas. For different application different characteristics of activated carbon is required. This paper concerns to find out the characteristics of activated carbons derived from tabah bamboo (Gigantochloc nigrociliata) that physically activated with different activation holding time. Prepared tabah bamboo was carbonized by heating up to the temperature of 800 °C for two hours. The char produced was powdered and then activated physically by heating up to 800 °C, soaked at that temperature during each 1, 1.5 and 2 hours under 100 mL/min N2flow. Activated carbons manufactured were characterized by proximate and ultimate analyses and SEM observation. The results show that the highest fix carbon (82.52%) and lowest ash (5.91 %) was obtained at 1 hour soaking time with moisture and volatile contents were 3.56% and 8.00 % respectively; the highest carbon (C) content of 84.16 % was yielded at soaked time of 1.5 hours; SEM observation shows that there were significant differences of morphology structure between raw material and activated carbons for all of the soaking time variations. The pores structures have been formed in the activated carbons produced.
Micro business of wheat flour chips and cassava chips is a home business that many families do in Bulelengand Karangasem regency. In that home-based business, they are generally facing the similar problems suchas relatively low of efficiency and productivity. These problems are caused in the process of cutting or slicingraw material of chips that is still processed conventionally so it takes a long time.In this article, the slicing machine of chips is designed with cutting speed reaches of about 120 pieces/minute.The machine has three main parts such as the driving part of 0.25Hp DC-Motor, the slicing section with diskknife and guide section of sliced chips.
Pertanian dan peternakan merupakan mata pencaharian utama sebagaian besar masyarakat Desa Buahan, Kec. Payangan-Gianyar. Untuk dapat lebih mengoptimalkan potensi peternakan, di desa ini banyak terbentuk kelompok tani ternak salah satunya adalah Kelompok Tani Ternak Tulus Nadi di Banjar Gambih. Dalam perjalannnya, kegiatan peternakan yang dilakukan masih bersifat konvensional dengan mengandalkan ketersediaan pakan ternak yang masih sangat tergantung pada ketersediaan lahan. Padahal dengan sentuhan teknonogi biofermentasi limbah organik seperti jerami dapak dimanfaatkan untuk menghasilkan pakan ternak yang berkualitas. Untuk alasan tersebut telah dilakukan sosialisasi dan praktek langsung pemanfaatan limbah jerami sebagai pakan ternak dengan teknologi biofermentasi dengan melibatkan narasumber yang berkompeten di bidangnya, anggota Kelompok Tani Ternak Tulus Nadi dan masyarakat sekitar peternakan serta mahasiswa peserta KKN PPM XIX Desa Buahan. Dari kegiatan yang dilakukan dapat disimpulkan bahwa; peternak sangat antusias mengikuti pelatihan, peternak mengetahui dan dapat membuat pakan ternak berkualitas dari limbah jerami dengan teknologi biofermentasi dan dapat pula memanfaatkan kotoran ternak menjadi pupuk yang lebih berkualitas dengan sentuhan biofermentasi. Pada akhirnya kegiatan ini diharapkan dapat meningkatkan produksi ternak dan produksi pupuk organic dengan sentuhan teknologi biofermentasi. Kata kunci : biofermentasi, limbah jerami, pakan ternak, kelompok tani