Lei Tao

Lei Tao


Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
26 February 2019 in Energies
Verified
Journal Article
Open access
PDF file
SLSongyan Li
Songyan Li
CQChenyu Qiao
Chenyu Qiao
GJGuowei Ji
Guowei Ji
QWQun Wang
Qun Wang
LTLei Tao
Lei Tao
Foam is a kind of ideal fluid for profile control in petroleum engineering, which has attracted intense interests of scholars globally in recent years. In this study, a foam system stabilized with anionic surfactants and clay particles was proposed for profile control in reservoirs, and the formulation was optimized experimentally. Moreover, flooding experiments in visible porous media models and in sandpacks were conducted to test the plugging effect of the foam system on reservoirs, and the effects of different factors such as gas–liquid ratio, temperature and permeability on profile control were also evaluated. According to the experimental results, the clay-HY-2 system was elected for its satisfactory foamability, stability, and salinity resistance, and the optimum concentrations of HY-2 and clay particle are 0.6 wt% and 5.0 wt%, respectively. Compared with traditional foam fluids, the clay-HY-2 system can form denser and smaller bubbles in high- and middle-permeable layers, enhancing the plugging effect there, while there are less bubbles in low-permeable layers, i.e., the restriction on the flow in narrow structures is slight. The clay-HY-2 foam can perform the efficient and uniform profile control effect on sandpacks when the foam quality is around 50%. The resistance factor of the foam decrease gradually with the increasing temperature, however, the resistance factor remains higher than 350.0 when the temperature reaches 80.0 °C. When the permeability exceeds 1502.0 mD, the clay-HY-2 foam can perform deep profile control in reservoirs, and the resistance factor are not sensitive to the change of permeability when it exceeds 3038.0 mD. Besides, the site application case shows that the clay-HY-2 foam do have good profile control effect on reservoirs, i.e., improving oil production and declining water cut.

2 April 2025 in Processes
Verified
Journal Article
Open access
PDF file
NZNa Zhang
Na Zhang
MZMohammed Sulaiman Ebrahim Zaid
Mohammed Sulaiman Ebrahim Zaid
LTLei Tao
Lei Tao
Wenyang ShiWenyang Shi
Wenyang Shi
WLWenxin Li
Wenxin Li
WLWenlong Lu
Wenlong Lu
Tea saponin is a kind of natural non-ionic surfactant. Saponins were extracted from tea seed cake using an ultrasonic-assisted enzymatic method. The optimization of the tea saponin extraction procedure was conducted by using the response surface method to increase the yield. Study results indicated that the maximum yield of tea saponin was 69.81 mg/g under the optimum conditions of an enzyme concentration of 0.67%, a solvent-to-material ratio of 16.82 mL/g, an extraction temperature of 58.14 °C and an extraction time of 1.89 h. The surface activity experimental study results indicated that the critical micelle concentration of tea saponin was 0.5 g/L at 30 °C, and the lowest surface tension was 39.61 mN/m. The surface tension and CMC of tea saponin remained basically unchanged between 30 °C to 60 °C. When the pH of the solution was slightly acidic, the surface tension of tea saponin decreased significantly, while the CMC remained almost unchanged. Tea saponin has good salt and hard water resistance, and its surface tension decreases to a certain extent in both saltwater and hard water. The foam volume of tea saponin can reach 490 mL, with a half-life of 2350 s, and the foam is relatively stable. The combination of tea saponin and other surfactants has a certain synergistic effect. The critical micelle concentration of its complex system with the natural surfactant rhamnolipids can increase by 69.23%, and the surface tension can be reduced to a minimum of 22.56 mN/m. Moreover, by using the proposed method, the foam performance and stability of the system have been improved to a certain extent. This has significant practical significance for fully utilizing and developing waste camellia dried cake resources.

17 January 2019 in Petroleum Science and Technology
Verified
Journal Article
Closed access
BLBinfei Li
Binfei Li
LTLei Tao
Lei Tao
NZNa Zhang
Na Zhang
KWKai Wang
Kai Wang
ZLZhaomin Li
Zhaomin Li
Flow characteristic of oil-in-water emulsion for heavy oil in porous media was studied. A surfactant was screened out and subsequently utilized as the emulsifier in sandpack flooding experiments with different oil-water ratio and permeability. The dual sandpack flooding experiment was conducted to investigate the effect of emulsion in porous media and the ability to enhance oil recovery. Results indicated that the selected surfactant gave a remarkable flow resistance in porous media. Higher oil-water ratio and lower permeability resulted in higher flow resistance. The surfactant increased ultimate recovery of 7.7% by diverting the fluid into low permeability sandpack.

16 March 2019 in Journal of Petroleum Exploration and Production Technology
Verified
Journal Article
Open access
PDF file
LTLei Tao
Lei Tao
MHMengmei Huang
Mengmei Huang
YLYali Liu
Yali Liu
YWYizhi Wu
Yizhi Wu
TATongwu An
Tongwu An
Binfei LiBinfei Li
Binfei Li
Many factors will affect the result of nitrogen-assisted gravity drainage (NAGD). In this work, sandpack and 2-dimensional (2D) visual plate model were employed to investigate the influence factors of NAGD, such as gas cap volume, formation dip angle, and back pressure. Nitrogen foam was also studied to improve the gas channeling and breakthrough. The experimental results indicated that the gas cap volume was the most significant influence factor on the oil recovery. With the increase of the gas cap volume, the oil recovery increased first and then decreased, and finally increased. The NAGD had a better performance in big dip angle of formation. There was a critical value of back pressure to obtain the maximum oil recovery. However, the gas channeling was intensely observed by experiments of both sandpack and 2D visual plate model. Fortunately, nitrogen foam could effectively inhibit the gas channeling and improve the result of NAGD.