Small-scale ocean observations play an important role in oceanographic research. The station-keeping method based on the underwater mobile platform has been proposed as a means of small-scale ocean observation with the advantages of low cost and high flexibility. However, few studies have carried out complete modeling of the small-scale ocean observation process of mobile platforms and proposed a corresponding station-keeping method based on this. In this article, a hybrid underwater profiler (HUP) was tested under two working conditions for its ability of maintaining position during designated area persistent monitoring (DAPM) within a specific area of the sea over a long period. The DAPM problem is modeled and the cost function that evaluates the performance of DAPM is defined. If the underwater profiler cannot measure data about underwater currents, it can maintain its position by setting constant gliding and yaw angles based on the depth-averaged current measured each time it surfaces. If it has instruments to observe ocean currents at each depth during a dive, the profiler can maintain its position using a strategy based on a quasi-Newton method. Simulation results show that the gliding strategies effectively assist the HUP in monitoring a designated area. Additionally, sea trials were performed without instrumentation to measure ocean currents and the effectiveness of the simpler gliding strategy was clearly demonstrated.
Considering the energy limitations of underwater vehicles, a strategy for energy saving is proposed. In the proposed buoyancy regulation strategy, oil of the buoyancy regulation system is pumped out several times at different depths instead of all at once. A balance between energy and time is achieved by assigning suitable weights, and the optimised depth which can be obtained from the pressure sensor is used as the judgement threshold based on the adaptive genetic algorithm. Through the numerical simulation using sea trial data, the influence of weight selection on energy and time is explored, and the frequency of oil draining for the vehicle to ascend is optimised. Simulation results show that the proposed buoyancy regulation strategy can save energy effectively when the frequency of oil draining is 4 times within depths of 0–500 m. Finally, trials were performed in Qiandao Lake and verify the contradictory relationship between energy and time.
This study presents a device for tracking, locating and communicating underwater vehicles as they work near the seabed. The system includes a base station placed on the seabed and a reflective module mounted on a hybrid underwater profiler (HUP). The base station localizes and communicates with the HUP working near the seabed based on laser reflections of corner cube retroreflectors. A tracking method based on the particle filter algorithm is then presented. Localization is performed using the least-squares method with refraction compensation. Lost tracking links are retrieved via a recovering approach based on the interpolation method. Finally, a communication method using a modulating retroreflector installed on the reflection module is proposed. The proposed tracking, localization, and communication approach provides higher localization accuracy with lower power consumption at low cost compared with the commonly used acoustic methods. The effectiveness of the proposed approach was clarified via tracking, localization, and communication experiments.
Unpowered airdrop is a widely used way to deploy buoys in marine research. This paper presents a method to predict the trajectory and the velocity of unpowered airdropped buoys through numerical simulation. A differential dynamic model of the airdropped buoy is established with reference to the aircraft dynamics, which contains the kinetics, kinematics, and geometric constraints of the buoy. The corresponding aerodynamic hyperparameters of the buoy are calculated and obtained by XFlow software. Although specific aerodynamic coefficient values need to be recalculated for buoys with different geometries and mass distributions, the proposed modeling paradigm is always applicable. The simulation results show the trajectory and velocity characteristics of the buoy, which provide guidance for grasping the timing of airdrop release and parachute opening.