Kwang-Seop Kim

Dr. Kwang-Seop Kim

Korea Institute of Machinery & Materials, Yusong, Korea

Research Focus & Metrics

Academic Career Length

22Years (2005-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
13 May 2015 in Chemistry of Materials
Verified
Journal Article
Closed access
KJKyungmin Jo
Kyungmin Jo
SLSangbong Lee
Sangbong Lee
SKSang-Min Kim
Sang-Min Kim
JIJUNG BIN IN
JUNG BIN IN
SLSeung-Mo Lee
Seung-Mo Lee
KKKwang-Seop Kim
Kwang-Seop Kim

14 May 2021 in NPG Asia Materials
Verified
Journal Article
Open access
PDF file
CKChan Kim
Chan Kim
MYMin-Ah Yoon
Min-Ah Yoon
BJBongkyun Jang
Bongkyun Jang
HKHyeon-Don Kim
Hyeon-Don Kim
JKJae-Hyun Kim
Jae-Hyun Kim
KKKwang-Seop Kim
Kwang-Seop Kim
The transfer of two-dimensional (2D) materials is crucial to the realization of 2D material-based devices for practical applications. The thinness of 2D materials renders them prone to mechanical damage during the transfer process and to degradation of their superior electrical and mechanical properties. Herein, the mechanisms involved in the damage of chemical vapor deposition-grown graphene (Gr) and MoS2 are investigated during a roll-based transfer process. We identify two different damage mechanisms, i.e., instability-induced damage and tensile strain-induced damage. The two mechanisms compete, depending on the thickness of the transfer medium, and induce dissimilar damage. By minimizing these two mechanisms, we realize and demonstrate the damage-free transfer of 2D materials. The sheet resistance and mobility of transferred Gr are 235 ± 29 Ω sq–1 and 2250 cm2 V–1 s–1, respectively, with no microscopic cracks or tear-out damage. We observe instability-induced damage to be ubiquitous in monolayer MoS2, thin metals, and thin oxide films. By understanding the instability-induced damage mechanism, a broad range of 2D materials and thin films can be transferred without mechanical damage. Damage-free transfer will contribute to the high-yield fabrication of 2D material-based electronic devices.

23 May 2022 in Sensors
Verified
Journal Article
Open access
PDF file
MYMin-Ah Yoon
Min-Ah Yoon
CKChan Kim
Chan Kim
JKJae-Hyun Kim
Jae-Hyun Kim
HLHak-Joo Lee
Hak-Joo Lee
KKKwang-Seop Kim
Kwang-Seop Kim
Graphene, an atomically thin material, has unique electrical, mechanical, and optical properties that can enhance the performance of thin film-based flexible and transparent devices, including gas sensors. Graphene synthesized on a metallic catalyst must first be transferred onto a target substrate using wet or dry transfer processes; however, the graphene surface is susceptible to chemical modification and mechanical damage during the transfer. Defects on the graphene surface deteriorate its excellent intrinsic properties, thus reducing device performance. In this study, the surface properties of transferred graphene were investigated according to the transfer method (wet vs. dry) and characterized using atomic force microscopy, Raman spectroscopy, and contact angle measurements. After the wet transfer process, the surface properties of graphene exhibited tendencies similar to the poly(methyl methacrylate) residue remaining after solvent etching. The dry-transferred graphene revealed a surface closer to that of pristine graphene, regardless of substrates. These results provide insight into the utilization of wet and dry transfer processes for various graphene applications.

30 March 2017 in ACS Applied Materials & Interfaces
Verified
Journal Article
Closed access
CKChan Kim
Chan Kim
MYMin-Ah Yoon
Min-Ah Yoon
BJBongkyun Jang
Bongkyun Jang
JKJae-Hyun Kim
Jae-Hyun Kim
HLHak-Joo Lee
Hak-Joo Lee
KKKwang-Seop Kim
Kwang-Seop Kim

1 March 2020 in Carbon
Verified
Journal Article
Closed access
SWSejeong Won
Sejeong Won
HJHyun-June Jung
Hyun-June Jung
DKDasom Kim
Dasom Kim
SLSang-Hun Lee
Sang-Hun Lee
DLDo Van Lam
Do Van Lam
JKJae-Hyun Kim
Jae-Hyun Kim

19 February 2019 in Nanomaterials
Verified
Journal Article
Open access
PDF file
DCDae-Hyun Cho
Dae-Hyun Cho
JJJaehyuck Jung
Jaehyuck Jung
CKChan Kim
Chan Kim
JLJinhwan Lee
Jinhwan Lee
SOSe-Doo Oh
Se-Doo Oh
CLChanggu Lee
Changgu Lee
In the present study, dry friction and wear properties of atomically thin CVD-grown graphene and MoS2 films on SiO2/Si substrates were compared at low (72 MPa) and high (378 MPa) contact pressures. Analysis of atomic force microscopy images of these films verified that the MoS2 films, which were directly grown on the SiO2/Si substrates, had clean surfaces and made conformal contacts with the substrates. In contrast, the graphene film showed many contaminants on its surface and was loosely bonded with its SiO2/Si substrate due to its wet transfer from a Cu foil to the substrate. The MoS2 film exhibited friction and wear properties superior to those of the graphene film both at low and high contact pressures. We found that the clean sliding surface and strong bonding with SiO2/Si were the main causes of the superiority of the MoS2 film compared to the graphene film. Mild wear occurred in a layer-by-layer fashion at low contact pressure for the MoS2 film. At high contact pressure, severe wear occurred due to failure at the boundary between the MoS2 films and the underlying substrates. At both contact pressures, friction did not increase immediately after the removal of the MoS2 film from the SiO2/Si substrate because the film transferred onto the counter sliding surface and served as a lubricant.