Excessive pressure drop within the internal flow channel of the water hydraulic throttle valve will generate severe noise. In order to reduce the noise of the throttle valve, in this paper, the model of the throttle valve was established, and the flow characteristics and acoustic characteristics of the valve were simulated. The simulation results showed that the parameters of the throat structure, such as the half angle, throat inlet angle and throat length, have a significant effect on the noise of the valve. Then, the three main structural parameters were used as optimization variables, and radial basis function (RBF) neural networks and multi-island genetic algorithms (MIGA) were used to reduce the noise of the valve. The approximate model of the relationship between the structural parameters of the valve and noise was established by RBF neural networks, and MIGA was used to optimize the approximate model. Finally, the optimal valve model was established based on the obtained optimal parameters, and its noise was analyzed through simulation and experiment. The research results indicated that the optimization method, which combines RBF Neural Network and MIGA, can effectively reduce the noise of hydraulic throttle valves.
12 October 2022 in Journal of Vibration Engineering & Technologies
Electro-Hydraulic Proportional Directional Valve (EHPDV) is a key component in an electro-hydraulic proportional control system. Erosion-abrasion caused by solid particles within the oil is one of the major concerns in hydraulic control valves which may result in equipment malfunction and even failure. In this paper, the erosion-abrasion of a sliding spool of EHPDV was researched through Computational Fluid Dynamic (CFD) simulation and the analysis consists of three steps: the continuous phase flow field simulation, particle tracking, and erosion calculation. Therefore, a three dimensional model of the valve was built and the grid was meshed by use of ICEM. Then, a coupled Eulerian-Lagrangian approach was employed to solve the liquid-particle flow characteristics within the EHPDV, the Erosion/Corrosion Research Center (E/CRC) erosion model and the Grant empirical formula of particle-wall rebound models were utilized to predict the erosion rate. The simulation results indicated that the average erosion rate of the sliding spool would nonlinearly various with the valve opening. In addition, the maximum and average erosion rate of the sliding spool would gradually increase with the velocity. 10 µm is the critical diameter, and the erosion rate would decrease with the increases of the particle diameter if the particle diameter is above 10 µm and inversely when the diameter is below 10µm. Based on the simulation results, an erosion prediction model of sliding spool was further proposed, which provides a theoretical principle for forecasting the lifecycle of EHPDV.