Donata Konopacka-Łyskawa

Dr. Donata Konopacka-Łyskawa

Gdańsk University of Technology, Faculty of Chemistry, Department of Process Engineering and Chemical Technology
orcid

Research Focus & Metrics

Academic Career Length

28Years (1999-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
25 April 2019 in Crystals
Verified
Journal Article
Open access
PDF file
DKDonata Konopacka-Łyskawa
Donata Konopacka-Łyskawa
Vaterite is the least thermodynamically stable anhydrous calcium carbonate polymorph. Its existence is very rare in nature, e.g., in some rock formations or as a component of biominerals produced by some fishes, crustaceans, or birds. Synthetic vaterite particles are proposed as carriers of active substances in medicines, additives in cosmetic preparations as well as adsorbents. Also, their utilization as a pump for microfluidic flow is also tested. In particular, vaterite particles produced as polycrystalline spheres have large potential for application. Various methods are proposed to precipitate vaterite particles, including the conventional solution-solution synthesis, gas-liquid method as well as special routes. Precipitation conditions should be carefully selected to obtain a high concentration of vaterite in all these methods. In this review, classical and new methods used for vaterite precipitation are presented. Furthermore, the key parameters affecting the formation of spherical vaterite are discussed.

1 December 2018 in Renewable Energy
Verified
Journal Article
Closed access
KKKarolina Kucharska
Karolina Kucharska
IHIwona Hołowacz
Iwona Hołowacz
DKDonata Konopacka-Łyskawa
Donata Konopacka-Łyskawa
Piotr RybarczykPiotr Rybarczyk
Piotr Rybarczyk
MKMarian Kamiński
Marian Kamiński

10 April 2018 in Energies
Verified
Journal Article
Open access
PDF file
RŁRafał Łukajtis
Rafał Łukajtis
Piotr RybarczykPiotr Rybarczyk
Piotr Rybarczyk
KKKarolina Kucharska
Karolina Kucharska
DKDonata Konopacka-Łyskawa
Donata Konopacka-Łyskawa
ESEdyta Słupek
Edyta Słupek
MKMarian Kamiński
Marian Kamiński
Pre-treatment is a significant step in the production of second-generation biofuels from waste lignocellulosic materials. Obtaining biofuels as a result of fermentation processes requires appropriate pre-treatment conditions ensuring the highest possible degree of saccharification of the feed material. An influence of the following process parameters were investigated for alkaline pre-treatment of Salix viminalis L.: catalyst concentration (NaOH), temperature, pre-treatment time and granulation. For this purpose, experiments were carried out in accordance to the Box-Behnken design for four factors. In the saccharification process of the pre-treated biomass, cellulolytic enzymes immobilized on diatomaceous earth were used. Based on the obtained results, a mathematical model for the optimal conditions of alkaline pre-treatment prediction is proposed. The optimal conditions of alkaline pre-treatment are established as follows: granulation 0.75 mm, catalyst concentration 7%, pre-treatment time 6 h and temperature 65 °C if the saccharification efficiency and cost analysis are considered. An influence of the optimized pre-treatment on both the chemical composition and structural changes for six various lignocellulosic materials (energetic willow, energetic poplar, beech, triticale, meadow grass, corncobs) was investigated. SEM images of raw and pre-treated biomass samples are included in order to follow the changes in the biomass structure during hydrolysis.

1 June 2017 in Materials Chemistry and Physics
Verified
Journal Article
Closed access
DKDonata Konopacka-Łyskawa
Donata Konopacka-Łyskawa
BKBarbara Kościelska
Barbara Kościelska
JKJakub Karczewski
Jakub Karczewski
AGAnna Gołąbiewska
Anna Gołąbiewska

26 November 2020 in Energies
Verified
Journal Article
Open access
PDF file
NCNatalia Czaplicka
Natalia Czaplicka
DKDonata Konopacka-Łyskawa
Donata Konopacka-Łyskawa
Technologies for the management of various types of waste and the production of useful products from them are currently widely studied. Both carbon dioxide and calcium-rich waste from various production processes are problematic wastes that can be used to produce calcium carbonate. Therefore, the purpose of this paper is to provide an overview about the state of the development of processes that use these two wastes to obtain a valuable CaCO3 powder. The paper reviews the current research on the use of post-distillation liquid from the Solvay process, steelmaking slag, concrete, cement, and gypsum waste as well as some others industrial Ca-rich waste streams in the calcium carbonate precipitation process via carbonation route. This work is an attempt to collect the available information on the possibility of influencing the characteristics of the obtained calcium carbonate. It also indicates the possible limitations and implementation problems of the proposed technologies.

1 October 2020 in Biomass and Bioenergy
Verified
Journal Article
Closed access
KKKarolina Kucharska
Karolina Kucharska
PRPiotr Rybarczyk
Piotr Rybarczyk
IHIwona Hołowacz
Iwona Hołowacz
DKDonata Konopacka-Łyskawa
Donata Konopacka-Łyskawa
ESEdyta Słupek
Edyta Słupek
MKMarian Kamiński
Marian Kamiński