Forest above-ground biomass (AGB) can be estimated based on light detection and ranging (LiDAR) point clouds. This paper introduces an accurate and detailed quantitative structure model (AdQSM), which can estimate the AGB of large tropical trees. AdQSM is based on the reconstruction of 3D tree models from terrestrial laser scanning (TLS) point clouds. It represents a tree as a set of closed and complete convex polyhedra. We use AdQSM to model 29 trees of various species (total 18 species) scanned by TLS from three study sites (the dense tropical forests of Peru, Indonesia, and Guyana). The destructively sampled tree geometry measurement data is used as reference values to evaluate the accuracy of diameter at breast height (DBH), tree height, tree volume, branch volume, and AGB estimated from AdQSM. After AdQSM reconstructs the structure and volume of each tree, AGB is derived by combining the wood density of the specific tree species from destructive sampling. The AGB estimation from AdQSM and the post-harvest reference measurement data show a satisfying agreement. The coefficient of variation of root mean square error (CV-RMSE) and the concordance correlation coefficient (CCC) are 20.37% and 0.97, respectively. AdQSM provides accurate tree volume estimation, regardless of the characteristics of the tree structure, without major systematic deviations. We compared the accuracy of AdQSM and TreeQSM in modeling the volume of 29 trees. The tree volume from AdQSM is compared with the reference value, and the determination coefficient (R²), relative bias (rBias), and CV-RMSE of tree volume are 0.96, 6.98%, and 22.62%, respectively. The tree volume from TreeQSM is compared with the reference value, and the R², relative Bias (rBias), and CV-RMSE of tree volume are 0.94, −9.69%, and 23.20%, respectively. The CCCs between the volume estimates based on AdQSM, TreeQSM, and the reference values are 0.97 and 0.96. AdQSM also models the branches in detail. The volume of branches from AdQSM is compared with the destructive measurement reference data. The R², rBias, and CV-RMSE of the branches volume are 0.97, 12.38%, and 36.86%, respectively. The DBH and height of the harvested trees were used as reference values to test the accuracy of AdQSM’s estimation of DBH and tree height. The R², rBias, and CV-RMSE of DBH are 0.94, −5.01%, and 9.06%, respectively. The R², rBias, and CV-RMSE of the tree height were 0.95, 1.88%, and 5.79%, respectively. This paper provides not only a new QSM method for estimating AGB based on TLS point clouds but also the potential for further development and testing of allometric equations.

Tree-level information can be estimated based on light detection and ranging (LiDAR) point clouds. We propose to develop a quantitative structural model based on terrestrial laser scanning (TLS) point clouds to automatically and accurately estimate tree attributes and to detect real trees for the first time. This model is suitable for forest research where branches are involved in the calculation. First, the Adtree method was used to approximate the geometry of the tree stem and branches by fitting a series of cylinders. Trees were represented as a broad set of cylinders. Then, the end of the stem or all branches were closed. The tree model changed from a cylinder to a closed convex hull polyhedron, which was to reconstruct a 3D model of the tree. Finally, to extract effective tree attributes from the reconstructed 3D model, a convex hull polyhedron calculation method based on the tree model was defined. This calculation method can be used to extract wood (including tree stem and branches) volume, diameter at breast height (DBH) and tree height. To verify the accuracy of tree attributes extracted from the model, the tree models of 153 Chinese scholartrees from TLS data were reconstructed and the tree volume, DBH and tree height were extracted from the model. The experimental results show that the DBH and tree height extracted based on this model are in better consistency with the reference value based on field survey data. The bias, RMSE and R² of DBH were 0.38 cm, 1.28 cm and 0.92, respectively. The bias, RMSE and R² of tree height were −0.76 m, 1.21 m and 0.93, respectively. The tree volume extracted from the model is in better consistency with the reference value. The bias, root mean square error (RMSE) and determination coefficient (R²) of tree volume were −0.01236 m³, 0.03498 m³ and 0.96, respectively. This study provides a new model for nondestructive estimation of tree volume, above-ground biomass (AGB) or carbon stock based on LiDAR data.

Terrestrial laser scanning (TLS) can provide accurate and detailed three-dimensional (3D) structure information of the forest understory. Segmenting individual trees from disordered, discrete, and high-density TLS point clouds is the premise for obtaining accurate individual tree structure parameters of forest understory, pest control and fine modeling. In this study, we propose a bottom-up method to segment individual trees from TLS forest data based on density-based spatial clustering of applications with noise (DBSCAN). In addition, we also improve the DBSCAN based on the distance distribution matrix (DDM) to automatically and adaptively determine the optimal cluster number and the corresponding input parameters. Firstly, the proposed method is based on the improved DBSCAN to detect the trunks and obtain the initial clustering results. Then, the Hough circle fitting method is used to modify the trunk detection results. Finally, individual tree segmentation is realized based on regional growth layer-by-layer clustering. In this paper, we use TLS multi-station scanning data from Chinese artificial forest and German mixed forest, and then evaluate the efficiency of the method from three aspects: overall segmentation, trunk detection and small tree segmentation. Furthermore, the proposed method is compared with three existing individual tree segmentation methods. The results show that the total recall, precision, and F1-score of the proposed method are 90.84%, 95.38% and 0.93, respectively. Compared with traditional DBSCAN, recall, accuracy and F1-score are increased by 6.96%, 4.14% and 0.06, respectively. The individual tree segmentation result of the proposed method is comparable to those of the existing methods, and the optimal parameters can be automatically extracted and the small trees under tall trees can be accurately segmented.

With the progressively deteriorating global ecological environment and the gradual escalation of human activities, the survival of wildlife has been severely impacted. Hence, a rapid, precise, and reliable method for detecting wildlife holds immense significance in safeguarding their existence and monitoring their status. However, due to the rare and concealed nature of wildlife activities, the existing wildlife detection methods face limitations in efficiently extracting features during real-time monitoring in complex forest environments. These models exhibit drawbacks such as slow speed and low accuracy. Therefore, we propose a novel real-time monitoring model called WL-YOLO, which is designed for lightweight wildlife detection in complex forest environments. This model is built upon the deep learning model YOLOv5s. In WL-YOLO, we introduce a novel and lightweight feature extraction module. This module is comprised of a deeply separable convolutional neural network integrated with compression and excitation modules in the backbone network. This design is aimed at reducing the number of model parameters and computational requirements, while simultaneously enhancing the feature representation of the network. Additionally, we introduced a CBAM attention mechanism to enhance the extraction of local key features, resulting in improved performance of WL-YOLO in the natural environment where wildlife has high concealment and complexity. This model achieved a mean accuracy (mAP) value of 97.25%, an F1-score value of 95.65%, and an accuracy value of 95.14%. These results demonstrated that this model outperforms the current mainstream deep learning models. Additionally, compared to the YOLOv5m base model, WL-YOLO reduces the number of parameters by 44.73% and shortens the detection time by 58%. This study offers technical support for detecting and protecting wildlife in intricate environments by introducing a highly efficient and advanced wildlife detection model.

The recognition and classification of rock lithology is an extremely important task of geological surveys. This paper proposed a new method for quickly identifying multiple types of rocks suitable for geological survey work field. Based on the two lightweight convolutional neural networks (CNNs), SqueezeNet and MobileNets, and combined with the transfer learning method, the rock lithology recognition model was established respectively. The model was embedded into the smart phone for testing. This method was used to identify and classify the images of 28 kinds rocks. Through the comprehensive comparison of the two models, the accuracy of SqueezeNet and MobileNets in the test data set is 94.55% and 93.27%. The average recognition time of the single rock image was 557 and 836 milliseconds. Rock images with a recognition accuracy of over 96% accounted for 95% and 93% of the entire test dataset. Compared with the classification method based on rock thin section images, this method does not need to make rock thin sections. This paper can meet the requirements of workers to quickly and accurately identify rocks in the work field, which improves the work efficiency and saves the identification cost.

The quantitative structure model (QSM) contains the branch geometry and attributes of the tree. AdQSM is a new, accurate, and detailed tree QSM. In this paper, an automatic modeling method based on AdQSM is developed, and a low-cost technical scheme of tree structure modeling is provided, so that AdQSM can be freely used by more people. First, we used two digital cameras to collect two-dimensional (2D) photos of trees and generated three-dimensional (3D) point clouds of plot and segmented individual tree from the plot point clouds. Then a new QSM-AdQSM was used to construct tree model from point clouds of 44 trees. Finally, to verify the effectiveness of our method, the diameter at breast height (DBH), tree height, and trunk volume were derived from the reconstructed tree model. These parameters extracted from AdQSM were compared with the reference values from forest inventory. For the DBH, the relative bias (rBias), root mean square error (RMSE), and coefficient of variation of root mean square error (rRMSE) were 4.26%, 1.93 cm, and 6.60%. For the tree height, the rBias, RMSE, and rRMSE were—10.86%, 1.67 m, and 12.34%. The determination coefficient (R²) of DBH and tree height estimated by AdQSM and the reference value were 0.94 and 0.86. We used the trunk volume calculated by the allometric equation as a reference value to test the accuracy of AdQSM. The trunk volume was estimated based on AdQSM, and its bias was 0.07066 m³, rBias was 18.73%, RMSE was 0.12369 m³, rRMSE was 32.78%. To better evaluate the accuracy of QSM’s reconstruction of the trunk volume, we compared AdQSM and TreeQSM in the same dataset. The bias of the trunk volume estimated based on TreeQSM was −0.05071 m³, and the rBias was −13.44%, RMSE was 0.13267 m³, rRMSE was 35.16%. At 95% confidence interval level, the concordance correlation coefficient (CCC = 0.77) of the agreement between the estimated tree trunk volume of AdQSM and the reference value was greater than that of TreeQSM (CCC = 0.60). The significance of this research is as follows: (1) The automatic modeling method based on AdQSM is developed, which expands the application scope of AdQSM; (2) provide low-cost photogrammetric point cloud as the input data of AdQSM; (3) explore the potential of AdQSM to reconstruct forest terrestrial photogrammetric point clouds.