During the real-aperture-scanning imaging process, terahertz (THz) images are often plagued with the problem of low spatial resolution. Therefore, an accommodative super-resolution framework for THz images is proposed. Specifically, the 3D degradation model for the imaging system is firstly proposed by incorporating the focused THz beam distribution, which determines the relationship between the imaging range and the corresponding image restoration level. Secondly, an adjustable CNN is introduced to cope with this range dependent super-resolution problem. By simply tuning an interpolation parameter, the network can be adjusted to produce arbitrary restoration levels between the trained fixed levels without extra training. Finally, by selecting the appropriate interpolation coefficient according to the measured imaging range, each THz image can be coped with its matched network and reach the outstanding super-resolution effect. Both the simulated and real tested data, acquired by a 160 ∼ 220 GHz imager, have been used to demonstrate the superiority of our method.
Satellite microwave radiometer data is affected by many degradation factors during the imaging process, such as the sampling interval, antenna pattern and scan mode, etc., leading to spatial resolution reduction. In this paper, a deep residual convolutional neural network (CNN) is proposed to solve these degradation problems by learning the end-to-end mapping between low-and high-resolution images. Unlike traditional methods that handle each degradation factor separately, our network jointly learns both the sampling interval limitation and the comprehensive degeneration factors, including the antenna pattern, receiver sensitivity and scan mode, during the training process. Moreover, due to the powerful mapping capability of the deep residual CNN, our method achieves better resolution enhancement results both quantitatively and qualitatively than the methods in literature. The microwave radiation imager (MWRI) data from the Fengyun-3C (FY-3C) satellite has been used to demonstrate the validity and the effectiveness of the method.
The nonlinearity in terahertz (THz) linear frequency modulated continuous wave (LFMCW) radar usually blurs the range profile and decreases the signal to noise ratio, hampering applications where high range-resolution is particularly emphasized. A software correction method, which comprises of transmitted nonlinearity estimation and nonlinear phase compensation for the beat signal, is proposed in this paper to drastically reduce the nonlinearity in THz LFMCW radar. Besides the commonly considered nonlinearity caused by voltage-controlled oscillator (VCO), the nonlinearity from other broadband hardware devices have also been included in our modified correction model, which gives the advantage of preciser compensation. Moreover, utilizing the phase gradient autofocus (PGA) method to estimate the transmitted nonlinear term and the residual video phase (RVP) removal method to remove the range dependency of the received nonlinearity, our method can uniformly compensate the nonlinearity in the whole range profile. In addition, no presupposed parametric model for the nonlinearity waveform is needed, which further strengthens the effectiveness of the proposed method in practical use. Both the simulated data and the real tested data, acquired by a 190 GHz radar with 60 GHz bandwidth, has been used to demonstrate the validity and the effectiveness of the method.
Passive multi-frequency microwave remote sensing is often plagued with the problems of low- and non-uniform spatial resolution. In order to adaptively enhance and match the spatial resolution, an accommodative spatial resolution matching (ASRM) framework, composed of the flexible degradation model, the deep residual convolutional neural network (CNN), and the adaptive feature modification (AdaFM) layers, is proposed in this paper. More specifically, a flexible degradation model, based on the imaging process of the microwave radiometer, is firstly proposed to generate suitable datasets for various levels of matching tasks. Secondly, a deep residual CNN is introduced to jointly learn the complicated degradation factors of the data, so that the resolution can be matched up to fixed levels with state of the art quality. Finally, the AdaFM layers are added to the network in order to handle arbitrary and continuous resolution matching problems between a start and an end level. Both the simulated and the microwave radiation imager (MWRI) data from the Fengyun-3C (FY-3C) satellite have been used to demonstrate the validity and the effectiveness of the method.
Terahertz (THz) testing, by the frequency modulated continuous wave (FMCW) system, is often hampered by the limited range resolution. Thus, in this paper, a software method is proposed to reconstruct the range profile, yielding significant improvements in range resolution and in signal parameter extraction. Specifically, the multiple signal characterization algorithm is first introduced to indicate a higher-resolution range profile qualitatively and to acquire the echoes’ initial values. Then, multiple Gaussian functions are applied to fit those echoes in the whole original range profile and to accurately extract the parameters, including the amplitude, range, and width, of each echo. Finally, with these parameters, the range profile can be more precisely and flexibly reconstructed, facilitating the following detection procedure to a great extent. Both the simulated and the real THz data, acquired by a 150–220 GHz FMCW imager, have been used to demonstrate the superiority and effectiveness of our method, qualitatively and quantitatively.
1 January 2017 in Progress In Electromagnetics Research M
In this paper, a portable frequency domain electromagnetic system CEM-2 is presented for shallow metal targets detection. This paper discusses the detection principle of frequency domain electromagnetic system, introduces hardware implementation, presents test results of each module, and gives the system's imaging results in field tests. Sinusoidal pulse width modulation technique is employed in this system to produce single-frequency or multi-frequencies synthetic electromagnetic signals with signal to noise ratio of about 85 dB. After integration, the CEM-2 system's in-phase noise level is about 90 ppm while the quadrature response is about 100 ppm. The experiment results of CEM-2 agree well with the simulation ones both from signatures and amplitudes. The experiment for detecting targets of different sizes and materials conducted in field indicates that CEM-2 system can be used to distinguish metallic and ferrous objects.