Similar-material, composed of different raw materials with different properties, is similar to the physical and mechanical properties of geotechnical media, in which raw material proportioning is an important means to control the performance of similar-material in physical simulation. On this basis, a new fluid–solid coupling similar-material was developed through proportioning tests, in which similar-material is mixed with river sand, calcium carbonate, talc powder, white cement, vaseline, antiwear hydraulic oil. The optimum proportioning test development process was established. First, the proportioning test scheme was designed based on the orthogonal test. Subsequently, test specimens were produced to obtain parameters such as density, compressive strength, tensile strength, and permeability coefficient. Then, by increasing the ingredients of the proportioning, the evolution law of parameters was obtained by range and variance analysis. Finally, four multiple linear regression equations between the parameters and similar-material ingredients were obtained, and the optimum proportioning of ingredients was further determined for different requirements. The results indicate that the selected raw materials and their proportioning method are feasible, and the results were also verified in a coal mine floor water inrush by physical simulation test. The experimental development process of a fluid–solid coupling similar-material can provide a reference for similar-material under different demand conditions.

Microbial Induced Calcite Precipitation (MICP) is a biochemical process widely found in nature, also known as microbial mineralization. This paper investigates whether this process can help promote the intelligent reinforcement and repair of underground projects such as mines and tunnels. We selected Bacillus sphaericus and Bacillus mucilaginosus as the research objects. The former has an outstanding urease production ability, and the latter can secrete carbonic anhydrase in vitro. Bacillus mucilaginosus was introduced into the culture solution of Bacillus sphaericus in the most suitable culture environment, and the changes of mineralization rate and mineralization yield of Bacillus sphaericus were observed and analyzed. The results revealed that, to maintain the highest growth rate of Bacillus sphaericus, the optimal pH value was between 7 and 8, the optimal urea concentration was 0.5 mol/L, the optimal Ca²⁺ concentration was 0.6 mol/L, and the optimal Luria‐Bertani (LB) culture concentration was 20 g/L. The amount of biomineralized calcium carbonate precipitated in the double bacteria solution can reach 1.89 times the amount of the precipitation in the Bacillus sphaericus solution under the same conditions. It concludes that the introduction of Bacillus mucilaginosus can effectively increase the mineralization yield of Bacillus sphaericus without affecting the mineralized products.