In this paper, the authors present pseudo-floating-gate (PFG) binary and analog inverters with feedback control. The PFG inverter can be used to implement digital, multiple-valued (MV) and analog circuits. The PFG inverter will suppress low frequency components due to a local feedback. PFG circuits can be utilized for low voltage (LV) binary-, multiple valued logic and analog circuits. Typical applications are detection of high frequency components in sensory signals, i.e. airbag sensors. A differential LV amplifier is presented. Simulated data is valid for a CMOS process with at threshold voltage equal to 0.4V. The circuits has been implemented in a 130nm CMOS process
1 May 2007 in 37th International Symposium on Multiple-Valued Logic (SMVLL'07)
This paper presents ternary counters using balanced ternary notation. The balanced ternary counters can replace binary full adders or counters in fast adder structures. The circuits use recharged CMOS semi-floating gate (RSFG) devices. By using balanced ternary notation, it is possible to build balanced ternary addition circuits, which can add both negative and positive operands, by using the same adder blocks. The circuit operates at a clock frequency of 1 Ghz. The supply voltage 1.0 Volt.
23 February 2011 in Analog Integrated Circuits and Signal Processing
In this paper we present an ultra low-voltage bidirectional and continuous time current mirror based on clocked semi-floating-gate transistors. The current mirror may be used with supply voltages down to 250 mV and frequencies up to several hundred MHz. The simulated data presented are obtained using the Spectre simulator provided by Cadence and valid for a 90 nm TSMC CMOS process.
In this paper we present a bi-directional AutoZe-roing Amplifier(AZA). The direction of the circuit is controlled by swapping the VDD and GND resulting in swap of input and output. The amplifier can have similar or different properties in each directions. In addition to the gain, the amplifier offers frequency band adjustment allowing it to be used in designing bidirectional time-continuous circuits such as filters and amplifiers. We also present a bi-directional frequency mixer/extractor using the bi-directional amplifier. The simulations presented in this paper are valid for the 90 nm CMOS transistor models from STM having a VDD equal to 1.2 V and threshold voltage of 0.25 V.
4 August 2012 in Analog Integrated Circuits and Signal Processing