Four carbon-based adsorbents (activated carbon, oxidatively modified activated carbon, graphite, and graphite oxide) were investigated as adsorbents for selectively removing quinoline from a model hydrocarbon fuel. The surface chemical properties of these carbon-based adsorbents were characterized by temperature-programmed desorption coupled with mass spectrometry (TPD-MS), X-ray photoelectron spectroscopy (XRD), elementary analysis (EA) and nitrogen adsorption–desorption analysis in detail. The influences of the textural structures and the surface functional groups of these carbon adsorbents on their adsorption performance were examined. The activated carbon modified by ammonium persulfate oxidation (APS) can achieve an adsorption capacity as high as 35.7 mg-N g−1. The results indicated that the oxygen-containing functional groups on the surface play a crucial role in determining their adsorptive performance for quinoline. In addition, enhancement of the interlayer distance in the graphite oxide results in a dramatic increase in the adsorption capacity of the graphite oxide. The accessibility of the oxygen functional groups on the surface for quinoline is important to the adsorption behavior. Considering its high adsorption capacity and good regenerability, the graphite oxide may also be a promising adsorbent for selectively adsorptive removal of nitrogen compounds from liquid hydrocarbon streams.
A novel fluoro-xanthate, 2-((4-fluorophenoxycarbonothioyl)thio)ethyl propanoate, was developed and successfully used as a mediator in the photoinduced controlled radical polymerization of more-activated monomers (methyl acrylate (MA), butyl acrylate, and N-isopropylacrylamide) and a less-activated monomer (vinyl acetate (VAc)). The controlled characteristics of the polymerization were demonstrated by the linearly increasing molar mass with conversion, producing polymers with narrow molar mass distributions (1.14–1.37) for MA and VAc. Furthermore, the block copolymer of PMA-b-PVAc was successfully synthesized through chain-extension using PMA as the macro-RAFT agent and VAc as the second monomer.
Hyperbranched polycaprolactone with controlled structure was synthesized by reversible addition-fragmentation chain transfer radical ring-opening polymerization along with self-condensed vinyl polymerization (SCVP) of 2-methylene-1,3-dioxepane (MDO). Vinyl 2-[(ethoxycarbonothioyl) sulfanyl] propanoate (ECTVP) was used as polymerizable chain transfer agent. Living polymerization behavior was proved via pseudo linear kinetics, the molecular weight of polymers increasing with conversion and successful chain extension. The structure of polymers was characterized by 1H NMR spectroscopy, tripe detection gel permeation chromatography, and differential scanning calorimetry. The polymer composition was shown to be able to tune to vary the amount of ester repeat units in the polymer backbone, and hence determine the degree of branching. As expected, the degree of crystallinity was lower and the rate of degradation was faster in cases of increasing the number of branches.