The work describes the mechanical performance of a metal rubber particles (MRP) damper design based on an auxetic (negative Poisson’s ratio) cellular configuration. The auxetic damper configuration is constituted by an anti-tetrachiral honeycomb, where the cylinders are filled with the MRP material. The MRP samples have been subjected to quasi-static loading to measure the stiffness and loss factor from the static hysteresis curve. A parametric experimental analysis has been carried out to investigate the effect of relative density and filling percentage on the static performance of the MRP, and to identify design guidelines for best use of MRP devices. An experimental assessment of the integrated auxetic-MRP damper concept has been provided through static and dynamic force response techniques.

This paper describes the influence on the compressive and dissipative behavior of entangled metallic wire material (EMWM) samples provided by their size and mutual connectivity. The mechanical properties of EMWM specimens with different thicknesses are obtained from quasi-static compressive and cyclic loading. The behavior of the stress–strain curves, tangent modulus, and loss factor are strongly dependent on the thickness of the samples. The analysis from samples connected in different layouts shows that apart from the global thickness, size scale effects and contact interface also play important roles in controlling the behavior of EMWM systems. The importance of the sample size and its connectivity with adjacent different layers are defined by the unique microstructure and contact properties of the wires near the specimen boundary layer. The boundary layer produces different mechanical behaviors and a distinct structural configuration compared to the EMWM bulk solid. These peculiar characteristics are confirmed by microstructural and qualitative observations obtained from computed tomography scanning. The results and analysis presented in this work are relevant to designing EMWM material systems with adaptive performance under different loading and geometric constraints.

We present here a design of the unit cell of a mechanical metamaterial based on the use of a tensegrity structural configuration with a metal rubber. Tensegrity combines the use of compression and tension-only elements, and allows the creation of structures with high rigidity per unit mass. Metal rubber is a multiscale porous metal material with high energy absorption and vibration damping capabilities under compressive load. The combination of the two structural and material concepts gives rise to a mechanical metamaterial with increased energy absorption and tuneable nonlinearity under quasi-static, vibration, and impact loading. We develop prototypes, models, and perform tests under static and dynamic loading conditions to assess the performance of this mechanical metamaterial.