23 July 2013 in Smart Materials and Structures
The work describes the mechanical performance of a metal rubber particles (MRP) damper design based on an auxetic (negative Poisson’s ratio) cellular configuration. The auxetic damper configuration is constituted by an anti-tetrachiral honeycomb, where the cylinders are filled with the MRP material. The MRP samples have been subjected to quasi-static loading to measure the stiffness and loss factor from the static hysteresis curve. A parametric experimental analysis has been carried out to investigate the effect of relative density and filling percentage on the static performance of the MRP, and to identify design guidelines for best use of MRP devices. An experimental assessment of the integrated auxetic-MRP damper concept has been provided through static and dynamic force response techniques.
1 September 2013 in Materials Science and Engineering: A
16 March 2015 in Physica Status Solidi (b)
2 April 2024 in Nonlinear Dynamics
30 April 2024 in Nonlinear Dynamics
1 January 2019 in Shock and Vibration
Aeroengines pursue high performance, and compressing blade‐casing clearance has become one of the main ways to improve turbomachinery efficiency. Rub‐impact faults occur frequently with clearance decreasing. A high‐speed rotor‐support‐casing test rig was set up, and the mechanism tests of light and heavy rub‐impact were carried out. A finite element model of the test rig was established, and the calculation results were in good agreement with the experimental results under both kinds of rub‐impact conditions. Based on the actual blade‐casing structure model, the effects of the major physical parameters including imbalance and material characteristics were investigated. During the rub‐impact, the highest stress occurs at the blade tip first and then it is transmitted to the blade root. Deformation on the impact blade tip generates easily with decreased yield strength, and stress concentration at the blade tip occurs obviously with weaker stiffness. The agreement of the computation results with the experimental data indicates the method could be used to estimate rub‐impact characteristics and is effective in design and analyses process.