Phosphorus-containing flame retardants synthesized from renewable resources have had a lot of impact in recent years. This article outlines the synthesis, characterization and evaluation of these compounds in polyesters and epoxy resins. The different approaches used in producing biobased flame retardant polyesters and epoxy resins are reported. While for the polyesters biomass derived compounds usually are phosphorylated and melt blended with the polymer, biobased flame retardants for epoxy resins are directly incorporated into the polymer structure by a using a phosphorylated biobased monomer or curing agent. Evaluating the efficiency of the flame retardant composites is done by discussing results obtained from UL94 vertical burning, limiting oxygen index (LOI) and cone calorimetry tests. The review ends with an outlook on future development trends of biobased flame retardant systems for polyesters and epoxy resins.
Novel polymeric flame retardants based on two acrylamides and 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO) or 5,5-dimethyl-[1,3,2]dioxaphosphinane-2-oxide (DDPO) are described for several applications in HexFlow® RTM6, a high-performance epoxy resin. Neat resin samples and carbon fiber-reinforced composites were tested for their glass transition temperatures (dynamic mechanical analysis), thermal stability (thermogravimetric analyses), flammability (UL94) and flame-retardant performance (Cone Calorimetry). Additionally, the fiber degradation occurring during combustion of carbon fiber-reinforced epoxy resins was observed by scanning electron microscopy to show the fiber protecting effect of these flame retardants. Whereas DOPO-containing polyacrylamides acting mainly in the gas phase showed the best flame retardant efficiency, DDPO-containing polyacrylamides acting mainly in the condensed phase showed the best fiber protection. A mixed polyacrylamide was synthesized to combine these effects. This thermoplastic is soluble in the resin and, therefore, suitable for injection molding processes. Interlaminar shear strength measurements showed no negative effect of the flame retardant. The versatility of these flame retardants is shown by investigations dealing with boehmite as synergist in neat resin samples.
19 July 2013 in Polymers for Advanced Technologies
Upcycling of low intrinsic viscosity (IV) poly(ethylene terephthalate) (PET) grades, such as bottle‐ or recycled grades, by a reactive foam extrusion process, provides an appropriate alternative to high pricing, high IV grades commonly used for foaming applications. However, the drawback of bottle‐grade PET foams is its flame retardant (FR) performance. In this study, pyromellitic dianhydride was used as a chain extender to foam bottle‐grade PET. The influence of different FRs, containing halogenated (HFR) and four different phosphorous‐based types, on the processability and final foam properties was investigated. HFR showed better processability to achieve proper foams with fine morphology compared to P‐based FRs, where the FR content was adjusted between 2 and 5 wt%. However, HFR exhibited lower FR performance by cone calorimeter testing compared to the P‐based FRs and the commercial reference foam Kerdyn. Nonetheless, all of the FRs can only improve the time to ignition of the neat PET foams while the other values depend on the specific type of FR. In addition, all FR foams have improved mechanical properties more than twice in comparison to the neat PET foam.
23 November 2018 in Journal of Applied Polymer Science