JunSu Kim

JunSu Kim


Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
29 August 2017 in IEEE Transactions on Geoscience and Remote Sensing
Verified
Journal Article
Closed access
JKJunSu Kim
JunSu Kim
KPKonstantinos P. Papathanassiou
Konstantinos P. Papathanassiou
HSHiroatsu Sato
Hiroatsu Sato
SQShaun Quegan
Shaun Quegan
A significant amount of the data acquired by sun-synchronous space-borne low-frequency synthetic aperture radars (SARs) through the postsunset equatorial sector are distorted by the ionospheric scintillations due to the presence of plasma irregularities and their zonal and vertical drift. In the focused SAR images, the distortions due to the postsunset equatorial ionospheric scintillations appear in the form of amplitude and/or phase “stripe” patterns of high spatial frequency aligned to the projection of the geomagnetic field onto the SAR image plane. In this paper, a methodology to estimate the height and the drift velocity of the scintillations from the “stripe” patterns detected in the SAR images is proposed. The analysis is based on the fact that the zonal and vertical drift of the plasma irregularities are, at the equatorial zone, perpendicular to the geomagnetic field which is almost parallel aligned to the orbit. The methodology takes advantage of the time lapse and change of imaging geometry across azimuth subapertures. The obtained height estimates agree well with the reference measurements and independent estimates reported in the literature, while the drift velocities appear slightly overestimated. This can be attributed to a suboptimum geometry configuration but also to a decoupling of the ambient ionosphere and the plasma irregularities.

23 August 2021 in Geophysical Research Letters
Verified
Journal Article
Open access
PDF file
HSHiroatsu Sato
Hiroatsu Sato
JKJunSu Kim
JunSu Kim
Yuichi OtsukaYuichi Otsuka
Yuichi Otsuka
CWCristiano Max Wrasse
Cristiano Max Wrasse
EPEurico Rodrigues de Paula
Eurico Rodrigues de Paula
JSJonas Rodrigues de Souza
Jonas Rodrigues de Souza
Plasma density irregularities in the equatorial ionosphere are thought to cause the distortions of L‐band Synthetic Aperture Radar (SAR) images, which have been observed in recent years, but the origin of the image distortion has not yet been clearly identified experimentally. We report on the first simultaneous observation of equatorial plasma bubbles (EPBs) by the ALOS‐2/PALSAR‐2 satellite and ground 630‐nm airglow imager in northern Brazil. We observe stripe‐like distortions of SAR signal power that are aligned in the direction of local magnetic field lines. The stripe‐like patterns are observed in the vicinity of airglow depletion. The result shows that the observed L‐band SAR stripes are caused by ionospheric scintillation due to plasma irregularities with the scale size of hundreds of meters associated with EPBs. We show that the SAR scintillation stripes are predominantly found at the location of sharp density gradients in the two‐dimensional form.

17 August 2021 in IEEE Geoscience and Remote Sensing Letters
Verified
Journal Article
Closed access
VGValeria Gracheva
Valeria Gracheva
JKJunSu Kim
JunSu Kim
PPPau Prats-Iraola
Pau Prats-Iraola
RSRolf Scheiber
Rolf Scheiber
MRMarc Rodriguez-Cassola
Marc Rodriguez-Cassola
At lower frequencies, synthetic aperture radar (SAR) images can be significantly affected by ionospheric scintillations. This letter proposes an approach to estimate ionospheric artifacts in single SAR images by combining Faraday rotation (FR) estimates and autofocus methods by using a Wiener filter. This novel approach achieves superior performance compared to using these techniques independently. This improvement is demonstrated by injecting randomly simulated ionospheric phase screens into simulated point targets and airborne data adjusted to the parameters of the Biomass system.

13 November 2024 in IEEE Transactions on Geoscience and Remote Sensing
Verified
Journal Article
Open access
RGRoman Guliaev
Roman Guliaev
JKJunSu Kim
JunSu Kim
MPMatteo Pardini
Matteo Pardini
KPKonstantinos Papathanassiou
Konstantinos Papathanassiou
Model-based forest height inversion from single-and multi-baseline Pol-InSAR data is today well-established. One of the critical performance points is the parameterisation of the vertical reflectivity profile. In this paper, the parameterisation of the vertical reflectivity profile using a tomographic reconstruction is proposed. To mitigate the limitations in the tomographic reconstruction induced by the limited vertical resolution especially for the ground scattering component, the ground and volume contributions are separated using the Sum of Kronecker Products (SKP) decomposition. For the forest height inversion, the Pol-InSAR line inclination angle is proposed, which, unlike the absolute coherence and the phase center, is invariant to the presence of a residual Dirac-like ground scattering contribution. The inversion performance is addressed and compared for both single- and multi-baseline cases, in the absence and presence of temporal decorrelation. In all cases the ground elevation is estimated from the tomographically reconstructed vertical reflectivity profiles and its accuracy directly influences the achieved inversion performance. The proposed methodology establishes a link between interferometric and tomographic measurements and is therefore relevant for missions that allow the implementation of both techniques. ESA’s BIOMASS is one such mission, and as such is being used as a test case to discuss different implementation scenarios. The different inversion strategies are applied on P-band campaign data acquired in the frame of the AFRISAR 2016 experiment and validated against reference measurements.

31 May 2021 in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
Verified
Journal Article
Open access
JKJunSu Kim
JunSu Kim
KPKonstantinos Papathanassiou
Konstantinos Papathanassiou
The Total Electron Content (TEC) is probably the most important single parameter to characterise the ionospheric state and its impact on Synthetic Aperture Radar (SAR) data. Its accurate estimation is therefore essential when it comes to the correction and calibration of SAR data distorted by the ionosphere. In recent years, the estimation of Faraday rotation (FR), i.e. the rotation of the polarimetric plane of the transmit-ted and scattered EM pulses as they propagate through the ionosphere, has become a key element of TEC estimation. FR is proportional to TEC and to the Line-of-Sight (LOS) component of the geomagnetic field. The availability of quad-polarimetric SAR data allows the precise estimation of FR, and thus TEC. However, an accurate TEC estimation requires knowledge of the geomagnetic field that varies with height. In this sense, the knowledge of the ionospheric height becomes an important issue for a correct FR to TEC conversion. While the estimation performance of FR is well under-stood, our understanding of the ionospheric height estimation by means of SAR is yet not established. In this paper, a new estimator that allows the simultaneous estimation of TEC and ionospheric height from FR measurement is proposed. It exploits the variation of the parallel-to-LOS component of the geomagnetic field across azimuth sub-looks. The performance of the proposed estimator is demonstrated using ALOS-2/PALSAR-2 data. The achieved estimation accuracy, precision and the prerequisite for an accurate estimation are discussed.

11 July 2021
Verified
Conference Paper
Open access
RGRoman Guliaev
Roman Guliaev
JKJunSu Kim
JunSu Kim
KPKonstantinos Papathanassiou
Konstantinos Papathanassiou
MPMatteo Pardini
Matteo Pardini
The realistic parameterization of the underlying (vertical) radar reflectivity profile is critical for a model-based inversion of forest height from polarimetric interferometric (Pol-InSAR) data. Indeed, an appropriate parameterization not only affects the final estimation performance, but also enables the inversion from a reduced observation space in terms of number of baselines and / or polarizations. Here, we investigate the possibility of using a full tomographic profile to parameterize the inversion. The proposed methodology is demonstrated and validated using Pol-InSAR and tomographic data acquired in the framework of relevant airborne campaigns.