The three-point bending fatigue tests were carried out in order to accurately predict the fatigue life of an asphalt mixture based on the plateau value (PV) of the dissipated strain energy ratio (DSER). The relations of the dissipated strain energy (DSE) to the stress-strength ratio, temperature and loading rate were studied, and the constructions of the mathematical models of DSE and DSER were completed based on the change laws of the DSE. The relation of the fatigue life to the PV was determined based on the analysis of damage evolution, based on which the fatigue equation was established and used to predict the fatigue life. The results show that the change laws of DSE and DSER can be well described by the proposed mathematical models. The PV is defined as the average value of the DSER in the second stage and the fatigue life decreases in power function with the increase of PV, based on which the fatigue equation of N_f = A(PV)^B was established, and the established fatigue equation is very close to that is used in the MEPDG. The fatigue equation can well predict the fatigue life asphalt mixture.

Using solid waste as supplementary cementitious materials (SCMs) is an effective strategy for promoting low-carbon construction development. However, single or binary systems often exhibit mismatched reaction kinetics, thereby limiting their performance at high cement replacement rates. This study focuses on a novel low-carbon concrete designed based on reaction sequence coordination, containing recycled brick powder (RBP), ground granulated blast-furnace slag (GGBS), and self-combusting coal gangue (SCCG). The effects of RBP, GGBS, and SCCG on the hydration process and microstructure of the novel low-carbon concrete with different replacement levels have been studied by testing compressive strength, workability, and durability and observing microstructural changes. The results showed that an optimized ternary composition with an RBP:GGBS:SCCG ratio of 4:3:1 achieves a cement replacement level of 30% while exhibiting a 28-day compressive strength of 38.26 MPa, representing a 14.2% increase compared with plain cement mortar. Microstructural analyses indicate that this enhanced performance results from a time-dependent reaction sequence, in which GGBS contributes predominantly at early ages by supplying calcium, whereas RBP and SCCG mainly participate through delayed pozzolanic reactions and pore refinement at later ages. Consequently, the optimized ternary mortar exhibits a water absorption of 11.12% and a 27.2% reduction in electrical flux. This study aims to provide practical strategies for enhancing the performance of low-carbon cementitious materials through a reaction sequence coordination design approach, thereby improving the utilization efficiency of solid waste in the production of low-carbon building materials.

The sustainable application of ultra-high-performance concrete (UHPC) is often constrained by high material costs and environmental footprints. While the individual effects of various industrial wastes have been extensively studied, the synergistic mechanism of multi-source waste in UHPC remains poorly understood. To fill the research gap, an eco-UHPC was developed wherein river sand (RS) was partially replaced by spontaneous combustion gangue sand (SCGS), and Portland cement (PC) was partially replaced by spontaneous combustion gangue (SCG) powder and phosphorous slag (PS). A systematic investigation was conducted to assess the packing density, flowability, mechanical properties, chloride ion penetration resistance, and micromorphology. The results indicate that 40% SCGS substitution (by mass) optimizes particle packing density and aggregate gradation, while PS incorporation significantly improves flowability by up to 16.83%. Notably, persistent pozzolanic reactions and the consumption of Ca(OH)₂ facilitate the generation of dense C-S-H gel, which creates a uniform microstructure and enhances late-stage compressive strength. Furthermore, superior chloride penetration resistance is achieved when the PS content is maintained below 20%. These findings support the synergistic utilization of SCGS, SCG, and PS in UHPC production, while facilitating broader application of UHPC through reduced costs and lower carbon emissions.