In this study, three series of Cu/CuCrZr composite plates were successfully achieved by explosive welding (EXW) method. The effect of the explosive rate and buffer plate on the microstructure and mechanical properties of bonding interface were investigated. In the bonding interface, no intermetallic or transition was formed. It was obvious that installing the buffer plate protected the composite plate from excessive ablation. With the increase of rate of explosive, the amplitude and wavelength of wave were increased. Some peninsular molten pockets were observed at the wavy interface adjacent to the wave crest of the three welds, the dimensions of which decreased with the decrease of explosive rate. Microhardness of bonding interface and outer face of plates were increased because of deformation that was originating from impact or reflection of the explosion pressure from the anvil. Microhardness and shear strength values were increased with the increase of explosive rate, while the values of clad plates with the buffer plate installed were more stable.
The effects of partially substituting Al for Cu in Zr59.62Cu18.4-xNi12Al6+xNb3Hf0.78Y0.2 (x = 0, 2, 4, 6, 8 at.%) bulk metallic glasses (BMGs) on their glass-forming ability (GFA), quasi-static and dynamic mechanical properties, and energy characteristics were investigated. The results showed that an appropriate substitution of Al for Cu can improve GFA and reach a critical casting size up to 10 mm. Additionally, with Al replacement of Cu, the change in the distribution and content of free volume inside the BMGs was the main reason for the quasi-static compression plasticity. In contrast, the BMGs exhibited no plasticity during dynamic compression and high-speed impact, owing to the short loading time and thermal softening effect. In terms of energy characteristics, all alloys have a high combustion enthalpy. And on the surface of the fragments collected from impact, the active elements Zr, Al, and Nb reacted because of the adiabatic temperature rise. Further, x = 4 at.% Zr-based BMG with its superior overall performance could penetrate a 6 mm Q235 plate at a speed of 1038 m/s, combining excellent mechanical properties and energy characteristics. This study contributes to the development of Zr-based BMGs as novel energetic structural materials.
A Fe61Cr2Nb3Si12B22 amorphous alloy rod sample of 8.8 mm diameter has been successfully prepared through explosive consolidation. The structure and thermal stability of the as-synthesized sample have been analyzed through X-ray diffraction (XRD) and differential scanning calorimeter (DSC) analysis. The results demonstrate that the sample still retains an amorphous structure, and the glass transition temperature (Tg), the crystallization onset temperature (Tx), the supercooled liquid zone (ΔTx) (Tx − Tg) and the reduced glass transition temperatures (Trg) (Tg/Tm) are 784 K, 812 K, 28 K, and 0.556, respectively. Its microstructure has been investigated by optical microscopy (OM) and scanning electron microscopy (SEM). The average microhardness of the alumina compact is about 1069 HV.
In this study, we propose a novel energetic structural material, HfZrTi(TaNbV)x (x = 0.1, 0.3, 0.5, 0.7, 0.9, Ta:Nb: V = 1:1:1), to improve the ductility and toughness of the HfZrTi high-entropy alloy (HEAs). The transformation of the single-phase Hexagonal Close-Packed (HCP) HfZrTi-based alloy into a Body-Centered Cubic (BCC) phase HfZrTiTaNbV alloy can be achieved by tuning the concentration of Group VB β-stabilizing elements. The proposed alloy combines the insensitivity and excellent mechanical strength of conventional inert alloys with the ability to react with air under high-velocity impact for energy release. The mechanical properties and energy release characteristics of HZTXx (H = Hf, Z = Zr, T = Ti, X = TaNbV) at various strain rates are systematically investigated, and comprehensive microstructural characterization is performed, establishing a clear structure–property relationship. Under high-rate loading, the rapid oxidation of reactive elements, such as Hf and Zr, with atmospheric oxygen releases substantial chemical energy, which can be further enhanced by an adiabatic temperature rise, inducing local thermal softening through adiabatic shear bands. This study elucidates the connection between the deformation response mechanism of HZTXx under dynamic loading and the microstructure, providing crucial insights for advancing the application of high-entropy alloys in energetic systems.
Gel electrolytes have emerged as the preferred electrolyte materials for quasi-solid Zn-air batteries, attributed to the high ionic conductivity and excellent mechanical flexibility. Nevertheless, the practical implementation faces multiple degradation challenges, including water loss, CO 2 erosion, mechanical damage, thermal effect, and contact failure, which severely constrain cyclic lifetime and environmental adaptability. This review systematically examines the degradation mechanisms of gel electrolytes and the corresponding mitigation strategies, covering recent progress in water retention enhancement, anti-CO 2 poisoning design, mechanical reinforcement, wide-temperature adaptability improvement, and Zn dendrite suppression. Current evidence indicates that single modification approaches are often insufficient to simultaneously enhance multiple performance. Future endeavors should therefore prioritize the design of gel electrolytes through multi-mechanism synergistic integration. Furthermore, a deeper understanding of structural evolution and failure behavior of gels under extreme conditions, combined with advanced characterization techniques, can guide the rational design and structural engineering of high-performance gel electrolytes, offering promise for advancing quasi-solid Zn-air batteries toward practical application.