Energetic structural materials play an important role in improving the damage performance of future weapons. To improve the energy-releasing behavior, Al0.5NbZrTi1.5Ta0.8Cex high-entropy alloys were prepared by vacuum-arc melting. The results showed the presence of BCC and FCC phases in the alloy with dendritic-morphology-element segregation and there were significant dislocations in the alloys. The current study focused on the effects of cerium content on the dynamic compressive mechanical and energetic characteristics. Cerium doping enhanced the energy-releasing characteristics of high-entropy alloys. The severity of the reaction increased with the increase in the cerium content, while the dynamic compressive strength generally decreased with the increase in cerium content. The Al0.5NbZrTi1.5Ta0.8Ce0.25 showed excellent mechanical and energy-releasing characteristics. The ballistic experiments indicated that Al0.5NbZrTi1.5Ta0.8Ce0.25 can penetrate 6-millimeter A3 plates and ignite the cotton behind the target at a velocity of 729 m/s, making it an ideal energetic structural material.
Boron and its alloys have been explored a lot and it is expected that they can replace pure aluminum powder in the energetic formulation of active materials. MgB2 compounds were prepared and characterized by a combination of mechanical alloying and heat treatment. The ignition and combustion of boron–magnesium alloys were studied with the ignition wire method and laser ignition infrared temperature measurement. The results show that MgB2 has good ignition characteristics with maximum ignition temperatures obtained by the two various methods of 1292 K and 1293 K, respectively. Compared with boron, the ignition temperature of MgB2 is greatly reduced after alloying. The ignition reaction of MgB2 mainly occurs on the surface and the ignition process has two stages. In the initial stage of ignition, the large flame morphology and combustion state are close to the combustion with gaseous Mg, whereas the subsequent combustion process is close to the combustion process of B. Compared with boron, the ignition temperature of MgB2 is greatly reduced which suggests that MgB2 may be used in gunpowder, propellant, explosives, and pyrotechnics due to its improved ignition performance.
The effects of partially substituting Al for Cu in Zr59.62Cu18.4-xNi12Al6+xNb3Hf0.78Y0.2 (x = 0, 2, 4, 6, 8 at.%) bulk metallic glasses (BMGs) on their glass-forming ability (GFA), quasi-static and dynamic mechanical properties, and energy characteristics were investigated. The results showed that an appropriate substitution of Al for Cu can improve GFA and reach a critical casting size up to 10 mm. Additionally, with Al replacement of Cu, the change in the distribution and content of free volume inside the BMGs was the main reason for the quasi-static compression plasticity. In contrast, the BMGs exhibited no plasticity during dynamic compression and high-speed impact, owing to the short loading time and thermal softening effect. In terms of energy characteristics, all alloys have a high combustion enthalpy. And on the surface of the fragments collected from impact, the active elements Zr, Al, and Nb reacted because of the adiabatic temperature rise. Further, x = 4 at.% Zr-based BMG with its superior overall performance could penetrate a 6 mm Q235 plate at a speed of 1038 m/s, combining excellent mechanical properties and energy characteristics. This study contributes to the development of Zr-based BMGs as novel energetic structural materials.
In this study, we propose a novel energetic structural material, HfZrTi(TaNbV)x (x = 0.1, 0.3, 0.5, 0.7, 0.9, Ta:Nb: V = 1:1:1), to improve the ductility and toughness of the HfZrTi high-entropy alloy (HEAs). The transformation of the single-phase Hexagonal Close-Packed (HCP) HfZrTi-based alloy into a Body-Centered Cubic (BCC) phase HfZrTiTaNbV alloy can be achieved by tuning the concentration of Group VB β-stabilizing elements. The proposed alloy combines the insensitivity and excellent mechanical strength of conventional inert alloys with the ability to react with air under high-velocity impact for energy release. The mechanical properties and energy release characteristics of HZTXx (H = Hf, Z = Zr, T = Ti, X = TaNbV) at various strain rates are systematically investigated, and comprehensive microstructural characterization is performed, establishing a clear structure–property relationship. Under high-rate loading, the rapid oxidation of reactive elements, such as Hf and Zr, with atmospheric oxygen releases substantial chemical energy, which can be further enhanced by an adiabatic temperature rise, inducing local thermal softening through adiabatic shear bands. This study elucidates the connection between the deformation response mechanism of HZTXx under dynamic loading and the microstructure, providing crucial insights for advancing the application of high-entropy alloys in energetic systems.
23 July 2026 in Journal of Materials Science: Materials in Electronics