Chuan-Pei Lee

Prof. Chuan-Pei Lee

Department of Applied Physics and Chemistry, University of Taipei
orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 May 2023 in Nanoscale Advances
Verified
Journal Article
Open access
PDF file
NKNiraj Kumar
Niraj Kumar
SGSudip Ghosh
Sudip Ghosh
DTDinbandhu Thakur
Dinbandhu Thakur
Chuan-Pei LeeChuan-Pei Lee
Chuan-Pei Lee
PSPrasanta Sahoo
Prasanta Sahoo
Supercapacitors have gained significant attention owing to their exceptional performance in various applications, such as mobile devices, electric vehicles, and renewable energy storage systems.

29 May 2021 in Catalysts
Verified
Journal Article
Open access
PDF file
PSPrasanta Sahoo
Prasanta Sahoo
SBSOUBHAGYA RANJAN BISOI
SOUBHAGYA RANJAN BISOI
YHYi-June Huang
Yi-June Huang
DUNG-SHENG TSAIDUNG-SHENG TSAI
DUNG-SHENG TSAI
Chuan-Pei LeeChuan-Pei Lee
Chuan-Pei Lee
The production of hydrogen via the water splitting process is one of the most promising technologies for future clean energy requirements, and one of the best related challenges is the choice of the most highly efficient and cost effective electrocatalyst. Conventional electrocatalysts based on precious metals are rare and very-expensive for large-scale production of hydrogen, demanding the exploration for low-cost earth abundant alternatives. In this context, extensive works from both theoretical and experimental investigations have shown that two-dimensional (2D) layered materials have gained considerable attention as highly effective electrocatalytic materials for electrical-driven hydrogen production because of their unique layered structure and exciting electrical properties. This review highlights recent advancements on 2D layered materials, including graphene, transitional metal dichalcogenides (TMDs), layered double hydroxides (LDHs), MXene, and graphitic carbon nitride (g-C3N4) as cost-effective and highly efficient electrocatalysts for hydrogen production. In addition, some fundamental aspects of the hydrogen evolution reaction (HER) process and a wide ranging overview on several strategies to design and synthesize 2D layered material as HER electrocatalysts for commercial applications are introduced. Finally, the conclusion and futuristic prospects and challenges of the advancement of 2D layered materials as non-precious HER electrocatalysts are briefly discussed.

21 January 2021 in Catalysts
Verified
Journal Article
Open access
PDF file
CCChueh-An Chen
Chueh-An Chen
CLChiao-Lin Lee
Chiao-Lin Lee
PYPo-Kang Yang
Po-Kang Yang
DUNG-SHENG TSAIDUNG-SHENG TSAI
DUNG-SHENG TSAI
Chuan-Pei LeeChuan-Pei Lee
Chuan-Pei Lee
Two-dimensional-layered transition metal dichalcogenides (2D-layered TMDs) are a chemically diverse class of compounds having variable band gaps and remarkable electrochemical properties, which make them potential materials for applications in the field of electrochemical energy. To date, 2D-layered TMDs have been wildly used in water-splitting systems, dye-sensitized solar cells, supercapacitors, and some catalysis systems, etc., and the pertinent devices exhibit good performances. However, several reports have also indicated that the active sites for catalytic reaction are mainly located on the edge sites of 2D-layered TMDs, and their basal plane shows poor activity toward catalysis reaction. Accordingly, many studies have reported various approaches, namely active-site engineering, to address this issue, including plasma treatment, edge site formation, heteroatom-doping, nano-sized TMD pieces, highly curved structures, and surface modification via nano-sized catalyst decoration, etc. In this article, we provide a short review for the active-site engineering on 2D-layered TMDs and their applications in electrochemical energy. Finally, the future perspectives for 2D-layered TMD catalysts will also be briefly discussed.

26 August 2021 in Molecules
Verified
Journal Article
Open access
PDF file
YHYi-June Huang
Yi-June Huang
PSPrasanta Sahoo
Prasanta Sahoo
DUNG-SHENG TSAIDUNG-SHENG TSAI
DUNG-SHENG TSAI
Chuan-Pei LeeChuan-Pei Lee
Chuan-Pei Lee
Since Prof. Grätzel and co-workers achieved breakthrough progress on dye-sensitized solar cells (DSSCs) in 1991, DSSCs have been extensively investigated and wildly developed as a potential renewable power source in the last two decades due to their low cost, low energy-intensive processing, and high roll-to-roll compatibility. During this period, the highest efficiency recorded for DSSC under ideal solar light (AM 1.5G, 100 mW cm−2) has increased from ~7% to ~14.3%. For the practical use of solar cells, the performance of photovoltaic devices in several conditions with weak light irradiation (e.g., indoor) or various light incident angles are also an important item. Accordingly, DSSCs exhibit high competitiveness in solar cell markets because their performances are less affected by the light intensity and are less sensitive to the light incident angle. However, the most used catalyst in the counter electrode (CE) of a typical DSSC is platinum (Pt), which is an expensive noble metal and is rare on earth. To further reduce the cost of the fabrication of DSSCs on the industrial scale, it is better to develop Pt-free electro-catalysts for the CEs of DSSCs, such as transition metallic compounds, conducting polymers, carbonaceous materials, and their composites. In this article, we will provide a short review on the Pt-free electro-catalyst CEs of DSSCs with superior cell compared to Pt CEs; additionally, those selected reports were published within the past 5 years.

19 January 2024 in ACS Omega
Verified
Journal Article
Open access
BSBibhuti Bhusan Sahoo
Bibhuti Bhusan Sahoo
PSPrasanta Sahoo
Prasanta Sahoo
VBVijayabhaskara Rao Bhaviripudi
Vijayabhaskara Rao Bhaviripudi
KSKrushna Chandra Sahu
Krushna Chandra Sahu
ATAbhishek Tripathi
Abhishek Tripathi
Chuan-Pei LeeChuan-Pei Lee
Chuan-Pei Lee
Multifunctional nanocomposites have shown great interest in clean energy systems and environmental applications in recent years. Herein, we first reported the synthesis of Dy2NiMnO6 (DNMO)/reduced graphene oxide (rGO) nanocomposites utilizing a hybrid approach involving sol-gel and solvothermal processes. Subsequently, we investigated these nanocomposites for their applications in catalysis, electromagnetic interference shielding, and supercapacitors. A morphological study suggests spherical-shaped DNMO nanoparticles of an average size of 382 nm that are uniformly distributed throughout the surface without any agglomeration. The as-prepared nanocomposites were used as catalysts to investigate the catalytic reduction of 4-nitrophenol in the presence of NaBH4. DNMO/rGO nanocomposites demonstrate superior catalytic activity when compared with bare DNMO, with the rate of reduction being influenced by the composition of the DNMO/rGO nanocomposites. In addition, novel multifunctional DNMO/rGO was incorporated into polyvinylidene difluoride (PVDF) to develop a flexible nanocomposite for electromagnetic shielding applications and exhibited a shielding effectiveness of 6 dB with 75% attenuation at a frequency of 8.5 GHz compared to bare PVDF and PVDF-DNMO nanocomposite. Furthermore, the electrochemical performance of DNMO/rGO nanocomposites was investigated as an electrode material for supercapacitors, exhibiting the highest specific capacitance of 260 F/g at 1 A/g. These findings provide valuable insights into the design of DNMO/rGO nanocomposites with remarkable performance in sustainable energy and environmental applications.

11 August 2021 in Materials
Verified
Journal Article
Open access
PDF file
Chuan-Pei LeeChuan-Pei Lee
Chuan-Pei Lee
Bayu Tri MurtiBayu Tri Murti
Bayu Tri Murti
PYPo-Kang Yang
Po-Kang Yang
Francesca RossiFrancesca Rossi
Francesca Rossi
CCCarlo Carraro
Carlo Carraro
RMRoya Maboudian
Roya Maboudian
A cobalt oxide (Co3O4)-decorated silicon carbide (SiC) nano-tree array (denoted as Co3O4/SiC NTA) electrode is synthesized, and it is investigated for use in micro-supercapacitor applications. Firstly, the well-standing SiC nanowires (NWs) are prepared by nickel (Ni)-catalyzed chemical vapor deposition (CVD) method, and then the thin layer of Co3O4 and the hierarchical Co3O4 nano-flower-clusters are, respectively, fabricated on the side-walls and the top side of the SiC NWs via electrodeposition. The deposition of Co3O4 on the SiC NWs benefits the charge transfer at the electrode/aqueous electrolyte interface due to its extremely hydrophilic surface characteristic after Co3O4 decoration. Furthermore, the Co3O4/SiC NTA electrode provides a directional charge transport route along the length of SiC nanowires owing to their well-standing architecture. By using the Co3O4/SiC NTA electrode for micro-supercapacitor application, the areal capacitance obtained from cyclic voltammetry measurement reaches 845 mF cm−2 at a 10 mV s−1 scan rate. Finally, the capacitance durability is also evaluated by the cycling test of cyclic voltammetry at a high scan rate of 150 mV s−1 for 2000 cycles, exhibiting excellent stability.