This study investigates residual stresses of the welded joint heat-affected zone for the processes that meet the Chinese and European standards of field rail welding. Furthermore, this study investigates the factory rail welding process and different normalizing methods in China. According to the residual stresses data and the Debye ring test result, the residual stresses distribution of the welded joint meets the Chinese standard and uses induction normalizing treatment resulting in the best service performance and an improvement in grain size uniformity. In the absence of a normalizing process, the ideal welding process that meets the Chinese standard is actually inferior to that which meets the European standard, with regard to a uniform distribution of the residual stresses of the welded joint.
30 January 2022 in The International Journal of Advanced Manufacturing Technology
U75V rail steel is widely used in railways in China, including train tunnels in mountain and subsea projects, where it suffers from selective corrosion near welded joints. To ensure adequate railway service life, this study examines the effect of the normalisation process on the electrochemical behaviour of U75V rail-welded joints (URWJs) manufactured by flash butt welding (FBW) using potentiodynamic polarisation and electrochemical impedance spectroscopy (EIS). Corrosion morphology and elemental distribution analyses were performed to investigate the corrosion behaviour. The results show that the grains within the joints became finer and more homogeneous after normalisation, with a lower corrosion rate and higher corrosion resistance. It is demonstrated that fewer corrosion products were formed on the surface of the normalised joints after electrochemical test, and the corrosion resistance of the URWJs improved, owing to the formation of denser passivation films caused by normalisation. These mechanisms of corrosion response help explain corrosion failure in railway lines, as well as also help optimise the welding process and normalising processes to obtain a corrosion-resistant microstructure and ensure the quality of welded joints.