khurram yousaf

Dr. khurram yousaf

orcid

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
8 September 2018 in Sustainability
Verified
Journal Article
Open access
PDF file
HLHaolu Liu
Haolu Liu
KYkhurram yousaf
khurram yousaf
KCKunjie Chen
Kunjie Chen
RFRui Fan
Rui Fan
JLJiaxin Liu
Jiaxin Liu
SSShakeel Soomro
Shakeel Soomro
In this study, an experimental heat pump dryer was designed. The specific moisture extraction rate and moisture extraction rate were used as performance indicators to explore the influence of environmental factors and the style of the hot air cycle on heat pump drying. The average temperature and humidity in Nanjing’s summer, winter, and throughout the whole year were taken as the experimental ambient temperature and humidity. Garlic slices 3 mm thick, with an initial moisture content of 66.714% w.b., were dried until the end moisture content was 10% w.b. Experimental results and thermal analysis showed that the open and semi-open heat pump dryers were greatly affected by ambient temperature and humidity. The closed heat pump drying system was greatly affected by the bypass air rate.

20 November 2017 in Journal of Food Quality
Verified
Journal Article
Open access
PDF file
KYkhurram yousaf
khurram yousaf
KCKunjie Chen
Kunjie Chen
CCChen Cairong
Chen Cairong
AAAdnan Abbas
Adnan Abbas
YHYuping Huang
Yuping Huang
ZXZhang Xuejin
Zhang Xuejin
The response surface methodology was used to optimize the hydrothermal processing conditions based on the rice quality parameters of the Rong Youhua Zhan rice variety (Indica). The effect of soaking temperature (29.77, 40, 55, 70, and 80.23°C), soaking time (67.55, 90, 120, 150, and 170.45 min), and steaming time (1.59, 5, 10, 15, and 18.41 min), each tested at five levels, on percentage of head rice yield (HRY), hardness, cooking time, lightness, and color were determined, with R2 values of 0.96, 0.94, 0.90, 0.88, and 0.94, respectively. HRY, hardness, cooking time, and color increased with process severity while lightness decreased, although HRY decreased after reaching a maximum. The predicted optimum soaking temperature, soaking time, and steaming time were 69.88°C, 150 min, and 6.73 min, respectively, and the predicted HRY, hardness, cooking time, lightness, and color under these conditions were 73.43%, 29.95 N, 32.14 min, 83.03 min, and 12.24 min, respectively, with a composite desirability of 0.9658. The parboiling industry could use the findings of the current study to obtain the desired quality of parboiled rice. This manuscript will be helpful for researchers working on commercializing parboiled rice processes in China as well as in other countries.

16 November 2019 in Drying Technology
Verified
Journal Article
Closed access
KYkhurram yousaf
khurram yousaf
HLHaolu Liu
Haolu Liu
XGXu Gao
Xu Gao
CLChao Liu
Chao Liu
AAAdnan Abbas
Adnan Abbas
KCKunjie Chen
Kunjie Chen
The concern of cumulative demand of parboiled paddy dryings signposts the requirement of more optimized and mechanized processing. The study was conducted to fulfill the requirements of an efficient heat pump (HP) dryer unit for paddy drying in subtropical monsoon climate region of China, by utilizing the different hot air circulation methods and environmental conditions in the winter season. Therefore, a newly designed HP drying test bench enhanced with a series of heat pumps was employed for parboiled paddy drying of different varieties and sample loads. The drying efficiency and performance of HP was assessed in terms of specific moisture evaporation rate (SMER), moisture evaporation rate (MER), and coefficient of performance (COP) in closed and open-loop cycles. The closed and open-loop cycles hot air dryings were employed with the temperature and velocity ranges of 50–60˚C and 2–3 m/s, respectively. Furthermore, SMER and MER for both varieties and COP in closed and open loops were optimized using response surface methodology (RSM). The findings of the study revealed the dependency of SMER and MER on the temperature and velocity, as minimum SMER and MER were witnessed at 47.93˚C and 2.5 m/s, while COP in closed loop (2.211) was higher than that of the open cycle (1.409) due to the entrance of a significant amount of ambient air into the designed system during each cycle. Moreover, the intended parameters were optimized by exploiting RSM and were as follows: 60˚C (drying temperature), 2.76 m/s (air velocity), 0.321 (SMER1), 1.318 (SMER2), 0.208 (OSMER1), 0.865 kg/kWh (OSMER2), 0.202 (MER1), 0.796 (MER2), 0.180 (OMER1), 0.689 kg/h (OMER2), 2.211 (COP-closed), and 1.409 (COP-open). We further perceived that the temperature has more effect on the drying efficiency compared to air velocity as performance indicators were found to be increased by lofting the temperature profiles. The confidence of interval was observed significant (5%) as we equated the optimized values with experimental values, that particularly offerings our study a valuable to achieve a high quality of parboiled paddy.

1 December 2021 in Journal of Food Processing and Preservation
Verified
Journal Article
Closed access
PDF file
HLHaolu Liu
Haolu Liu
KYkhurram yousaf
khurram yousaf
ZYZhenwei Yu
Zhenwei Yu
ARAsad Riaz
Asad Riaz
INInnocent Nyalala
Innocent Nyalala
KCKunjie Chen
Kunjie Chen

11 March 2019 in Energies
Verified
Journal Article
Open access
PDF file
MAMuhammad Ameen
Muhammad Ameen
ZZZhuo Zhang
Zhuo Zhang
Wang XiaoChanWang XiaoChan
Wang XiaoChan
MYMuhammad Yaseen
Muhammad Yaseen
MUMuhammad Umair
Muhammad Umair
Muhammad Sohail MemonMuhammad Sohail Memon
Muhammad Sohail Memon
The winter season in Nanjing is from December to February, with extremely low temperature and high humidity due to seasonal snowfall. During these extreme cold climatic conditions, plants have to survive severe heat stress conditions, even if they are being kept in greenhouses. The objective of this study was to investigate a heating system that can provide heat directly to the root zone instead of heating the entire greenhouse, which is a viable option to reduce energy consumption. Root zone heating could be an effective alternative for the sustainable development of plants during the winter. A novel type of root zone heating system was applied to evaluate the energy consumption during different greenhouse ambient temperature conditions, the effects of root zone heating systems on pepper plant morphology, and heat transfer rates to plant canopy in the greenhouse. The temperature treatments in root zone heating system were T-15, T-20, T-25, T-30, and a control treatment (TC) at 15 °C, 20 °C, 25 °C, and 30 °C, respectively, while TC received no heat. A simulation study was carried out to validate the root zone temperature. The results of the current investigation revealed that energy consumption has an inverse relationship to the ambient temperature of the greenhouse, while temperature gradients to the plant canopy observed from the lower to the upper part of the plant and the upper canopy experienced less temperature fluctuation as compared to the lower part of the plant. The results also showed that treatment T-20 had the maximum in terms of the leaf dry weight, stem diameter, and the number of leaves, while T-25 showed the maximum root dry weight and stem dry weight; T-30 and T-15 had minimum dry weights of plant segments among all treatments. Control treatment (TC) showed a minimum dry mass of plant. The root zone heating with optimal root zone temperature was found to be a viable and adaptable option as this leads to improved energy consumption patterns for the sustainable growth and development of plants in greenhouses during extremely low temperatures.

10 November 2018 in Sustainability
Verified
Journal Article
Open access
PDF file
MAMuhammad Ameen
Muhammad Ameen
Wang XiaoChanWang XiaoChan
Wang XiaoChan
MYMuhammad Yaseen
Muhammad Yaseen
MUMuhammad Umair
Muhammad Umair
KYkhurram yousaf
khurram yousaf
SSSkakeel Ahmed Soomro
Skakeel Ahmed Soomro
The proposed system was developed to help the farmers of the Yangtze River Delta to grow greenhouse plants over winter, as the region has very low winter temperatures. For this reason, the experiment was undertaken during winter in extremely low temperatures to obtain optimal results. Keeping in mind the importance of sustainable practices, the authors developed the system using sustainable materials. The system was heated for 6 hours and then the hourly heat transfer rates were measured for 12 hours. The power consumption data of the heating system during different ambient temperatures were collected. Additionally, a simulation model of the heating system was developed using the COMSOL Multiphysics 5.3a package. The heat transfer in a porous media model was used in this study. Finally, the simulation results obtained from the COMSOL Multiphysics 5.3a package were analyzed and compared to the experimental results; these results were found to be in good agreement, thus authenticating the simulation model. After analyzing the data obtained from both methods, the power consumption of the heating system during different ambient temperature conditions were also calculated, which ranged from 15.73 W to 70.02 W in the simulated method and 28.2 W to 91.2 W in the experimental method. It was found that the root zone temperature remained in the range of 0–35 °C. This range of root zone temperature is suitable for many greenhouse horticultural crops such as tomato, cucumber, pepper, strawberry, lettuce, etc. The optimal root zone temperatures of many greenhouse horticultural plants are verified by many researchers.