Moving towards autonomy, unmanned vehicles rely heavily on state-of-the-art collision avoidance systems (CAS). A lot of work is being done to make the CAS as safe and reliable as possible, necessitating a comparative study of the recent work in this important area. The paper provides a comprehensive review of collision avoidance strategies used for unmanned vehicles, with the main emphasis on unmanned aerial vehicles (UAV). It is an in-depth survey of different collision avoidance techniques that are categorically explained along with a comparative analysis of the considered approaches w.r.t. different scenarios and technical aspects. This also includes a discussion on the use of different types of sensors for collision avoidance in the context of UAVs.

The development of a navigation system is one of the major challenges in building a fully autonomous platform. Full autonomy requires a dependable navigation capability not only in a perfect situation with clear GPS signals but also in situations, where the GPS is unreliable. Therefore, self-contained odometry systems have attracted much attention recently. This paper provides a general and comprehensive overview of the state of the art in the field of self-contained, i.e., GPS denied odometry systems, and identifies the out-coming challenges that demand further research in future. Self-contained odometry methods are categorized into five main types, i.e., wheel, inertial, laser, radar, and visual, where such categorization is based on the type of the sensor data being used for the odometry. Most of the research in the field is focused on analyzing the sensor data exhaustively or partially to extract the vehicle pose. Different combinations and fusions of sensor data in a tightly/loosely coupled manner and with filtering or optimizing fusion method have been investigated. We analyze the advantages and weaknesses of each approach in terms of different evaluation metrics, such as performance, response time, energy efficiency, and accuracy, which can be a useful guideline for researchers and engineers in the field. In the end, some future research challenges in the field are discussed.

This work focuses on the development of an effective collision avoidance algorithm that detects and avoids obstacles autonomously in the vicinity of a potential collision by using a single ultrasonic sensor and controlling the movement of the vehicle. The objectives are to minimise the deviation from the vehicle’s original path and also the development of an algorithm utilising one of the cheapest sensors available for very lost cost systems. For instance, in a scenario where the main ranging sensor malfunctions, a backup low cost sensor is required for safe navigation of the vehicle while keeping the deviation to a minimum. The developed algorithm utilises only one ultrasonic sensor and approximates the front shape of the detected object by sweeping the sensor mounted on top of the unmanned vehicle. In this proposed approach, the sensor is rotated for shape approximation and edge detection instead of moving the robot around the encountered obstacle. It has been tested in various indoor situations using different shapes of objects, stationary objects, moving objects, and soft or irregularly shaped objects. The results show that the algorithm provides satisfactory outcomes by entirely avoiding obstacles and rerouting the vehicle with a minimal deviation.

Two important aspects in dealing with autonomous navigation of a swarm of drones are collision avoidance mechanism and formation control strategy; a possible competition between these two modes of operation may have negative implications for success and efficiency of the mission. This issue is exacerbated in the case of distributed formation control in leader-follower based swarms of drones since nodes concurrently decide and act through individual observation of neighbouring nodes’ states and actions. To dynamically handle this duality of control, a plan of action for multi-priority control is required. In this paper, we propose a method for formation-collision co-awareness by adapting the thin-plate splines algorithm to minimize deformation of the swarm’s formation while avoiding obstacles. Furthermore, we use a non-rigid mapping function to reduce the lag caused by such maneuvers. Simulation results show that the proposed methodology maintains the desired formation very closely in the presence of obstacles, while the response time and overall energy efficiency of the swarm is significantly improved in comparison with the existing methods where collision avoidance and formation control are only loosely coupled. Another important result of using non-rigid mapping is that the slowing down effect of obstacles on the overall speed of the swarm is significantly reduced, making our approach especially suitable for time critical missions.

Moving towards autonomy, unmanned vehicles rely heavily on state-of-the-art collision avoidance systems (CAS). However, the detection of obstacles especially during night-time is still a challenging task since the lighting conditions are not sufficient for traditional cameras to function properly. Therefore, we exploit the powerful attributes of event-based cameras to perform obstacle detection in low lighting conditions. Event cameras trigger events asynchronously at high output temporal rate with high dynamic range of up to 120 dB. The algorithm filters background activity noise and extracts objects using robust Hough transform technique. The depth of each detected object is computed by triangulating 2D features extracted utilising LC-Harris. Finally, asynchronous adaptive collision avoidance (AACA) algorithm is applied for effective avoidance. Qualitative evaluation is compared using event-camera and traditional camera.