Artificial light at night (ALAN) is increasing exponentially worldwide, accelerated by the transition to new efficient lighting technologies. However, ALAN and resulting light pollution can cause unintended physiological consequences. In vertebrates, production of melatonin—the “hormone of darkness” and a key player in circadian regulation—can be suppressed by ALAN. In this paper, we provide an overview of research on melatonin and ALAN in vertebrates. We discuss how ALAN disrupts natural photic environments, its effect on melatonin and circadian rhythms, and different photoreceptor systems across vertebrate taxa. We then present the results of a systematic review in which we identified studies on melatonin under typical light-polluted conditions in fishes, amphibians, reptiles, birds, and mammals, including humans. Melatonin is suppressed by extremely low light intensities in many vertebrates, ranging from 0.01–0.03 lx for fishes and rodents to 6 lx for sensitive humans. Even lower, wavelength-dependent intensities are implied by some studies and require rigorous testing in ecological contexts. In many studies, melatonin suppression occurs at the minimum light levels tested, and, in better-studied groups, melatonin suppression is reported to occur at lower light levels. We identify major research gaps and conclude that, for most groups, crucial information is lacking. No studies were identified for amphibians and reptiles and long-term impacts of low-level ALAN exposure are unknown. Given the high sensitivity of vertebrate melatonin production to ALAN and the paucity of available information, it is crucial to research impacts of ALAN further in order to inform effective mitigation strategies for human health and the wellbeing and fitness of vertebrates in natural ecosystems.

The Sustainable Development Goals (SDGs) aim at providing a healthier planet for present and future generations. At the most recent SDG summit held in 2019, Member States recognized that the achievements accomplished to date have been insufficient to achieve this mission. This paper presents a comprehensive literature review of 227 documents contextualizing outdoor lighting with SDGs, showing its potential to resolve some existing issues related to the SDG targets. From a list of 17 goals, six SDGs were identified to have relevant synergies with outdoor lighting in smart cities, including SDG 3 (Good health and well-being), SDG 11 (Sustainable cities and communities), SDG 14 (Life below water) and SDG 15 (Life on land). This review also links efficient lighting roles partially with SDG 7 (Affordable and clean energy) and SDG 13 (Climate action) through Target 7.3 and Target 13.2, respectively. This paper identifies outdoor lighting as a vector directly impacting 16 of the 50 targets in the six SDGs involved. Each section in this review discusses the main aspects of outdoor lighting by a human-centric, energy efficiency and environmental impacts. Each aspect addresses the most recent studies contributing to lighting solutions in the literature, helping us to understand the positive and negative impacts of artificial lighting on living beings. In addition, the work summarizes the proposed solutions and results tackling specific topics impacting SDG demands.

Nepal houses many traditional and cultural sites rich in historical cultural diversity. These sites are also economically important to the nation. These monuments show the culture and the living beliefs of the communities; hence, people from all over the world are attracted to such place to observe the beauty and to feel the spirit and the conservational perspectives behind these articulated edifices. In today’s context, artificial light is a basic necessity for human activities and has been used in various applications: one such application being night-time illumination of historical sites and monuments. Most of the historic monuments in Nepal were constructed during the 15th to 18th century and are designed to incorporate oil-based wick lamp as the light source. Recently with the availability of modern luminaires and lack of technical expertise and scientific approach, most of the historic sites are being filled up with uneven, exaggerated, and inappropriate illumination. This inappropriate illumination practice may lead to negative consequences that may create disturbance to human and the surrounding environment. Scope of this paper is to identify the special needs for illuminating cultural and heritage sites with Pagoda-style architecture and introduce a methodology for a case study in Nepal. As a first step, this paper analyzes lighting malpractices in the temples of Nepal at different geographical locations and cultural values. As a next step, a prototype LED luminaire that enhances the unique type of architecture of Nepalese heritage sites was built, installed, and demonstrated in one of the temples. The work presents the design process of the lighting system and the results of a new lighting installation. The study also discusses possible problems that may arise while designing lighting for cultural and heritage site and provides recommendations on considerations to be taken during the design.

In previous user-acceptance studies conducted at Aalto University, it was found that the preferred light-emitting diode spectral power distributions (SPDs) were not characterised by a high-CIE colour-rendering index but by a high-colour quality index (CQS) colour preference scale (Qp) and a high-CQS gamut area scale (Qg). In these studies, the SPDs were realised with a 12-channel LED spectra simulator. It is, however, foreseen that LED light sources consisting of 12 different types of LEDs will not be commercially exploitable due to complexity. The objective of this work was to investigate the possibility of generating simplified LED SPDs having CQS Qp and CQS Qg values similar to those of the preferred complex LED SPDs found in the previous user-acceptance studies. User-acceptance studies were carried out in lighting booths to investigate people’s preferences for the lit environment under both the complex and simplified LED spectra. The results suggest that the preferred complex LED SPDs can be optimized both for efficiency and cost without sacrificing the colour quality of the light.

The main aim of the article is to find out the performance of different metrics proposed to CIE TC 1-91. Currently, six different indexes have been proposed to CIE TC 1-91: Colour Quality Scale (CQS), Feeling of Contrast Index (FCI), Memory colour rendering index (MCRI), Preference of skin (PS), Relative gamut area index (RGAI) and Illuminating Engineering society Method for evaluating light source colour rendition (IES TM-30). The evaluation and analysis are based on previously conducted experiment in lighting booth. The analysis showed the area based metric FCI was good subjective preference indicator. The subjective preference was measured in terms of naturalness of objects, colourfulness of colour checker chart, and the visual appearance of the lit scene in the booth.

Owing to the special tubular structural characteristics of highway tunnels, drivers typically experience a significant change in visual luminance when entering tunnels, which seriously impacts driving safety. This paper proposes a lighting scheme based on optical fiber technology to introduce natural light into the tunnel portal section. First, an on-demand lighting scheme based on the use of daylight is designed by developing an optical fiber lighting system, lighting demand algorithm, and an on-demand lighting control scheme. Furthermore, the scheme is applied to a physical tunnel, and the safety and energy-saving potential of the scheme are analyzed based on the obtained data. The results indicate that the average luminance and luminance uniformity in the tunnel portal section appear to improve with the application of the proposed scheme; the luminance uniformity is particularly increased by 0.18. The correlative color temperature (CCT) of the environment inside the cave changes in real time with the CCT value of the phase pair outside the cave. Compared with the explicit use of electrical lighting, the lighting energy consumption during daytime can be reduced by 34.7% with the application of the proposed scheme, and the highest reduction of 79.8% can be achieved at 13:00.