11 December 2013 in Lighting Research & Technology
In previous user-acceptance studies conducted at Aalto University, it was found that the preferred light-emitting diode spectral power distributions (SPDs) were not characterised by a high-CIE colour-rendering index but by a high-colour quality index (CQS) colour preference scale (Qp) and a high-CQS gamut area scale (Qg). In these studies, the SPDs were realised with a 12-channel LED spectra simulator. It is, however, foreseen that LED light sources consisting of 12 different types of LEDs will not be commercially exploitable due to complexity. The objective of this work was to investigate the possibility of generating simplified LED SPDs having CQS Qp and CQS Qg values similar to those of the preferred complex LED SPDs found in the previous user-acceptance studies. User-acceptance studies were carried out in lighting booths to investigate people’s preferences for the lit environment under both the complex and simplified LED spectra. The results suggest that the preferred complex LED SPDs can be optimized both for efficiency and cost without sacrificing the colour quality of the light.
9 October 2019 in Lighting Research & Technology
Presently, luminance distribution measurement devices, using High Dynamic Range technology, are increasingly used as they provide a lot of relevant data related to the lit environment at once. However, the accuracy of these devices can be a concern. It is expected that the accuracy would be improved by incorporating the effect of the camera spectral responsivity and the spectral power distribution of the illuminant under which the measurements are conducted. This study introduces two optimization criteria incorporating these aspects to improve the spectral match and the performance of luminance distribution measurement devices. Both criteria are tested in a theoretical model and in practical measurements using two cameras and three illuminants: LED, halogen and fluorescent. Both methodologies support the hypothesis that the conventional method to determine the luminance introduces spectral mismatches that can be limited by optimizing relative to the spectral responsivity of the camera. Additionally, substantial evidence was found, by both the theoretical model and the validation measurements, that the spectral power distribution of the illuminant also has an effect on the performance.