Metasurfaces are planar optical elements that hold promise for overcoming the limitations of refractive and conventional diffractive optics. Previous metasurfaces have been limited to transparency windows at infrared wavelengths because of significant optical absorption and loss at visible wavelengths. Here we report a polarization-insensitive, high-contrast transmissive metasurface composed of crystalline titanium dioxide pillars in the form of metalens at the wavelength of 633 nm. The focal spots are as small as 0.54 ${\lambda }_d$ , which is very close to the optical diffraction limit of 0.5 ${\lambda }_d$ . The simulation focusing efficiency is up to 88.5%. A rigorous method for metalens design, the phase realization mechanism and the trade-off between high efficiency and small spot size (or large numerical aperture) are discussed. Besides, the metalenses can work well with an imaging point source up to ±15° off axis. The proposed design is relatively systematic and can be applied to various applications such as visible imaging, ranging and sensing systems.

A relative humidity sensor based on a graphene oxide-coated few-mode fiber Mach-Zehnder interferometer (MZI) is proposed in this paper. The MZI was made by splicing a segment of the few-mode fiber (FMF) between two segments of a no-core fiber (NCF) and two segments of a single mode fiber (SMF) located outside the two NCFs. The core and cladding of the FMF acted as interferometric arms, while the NCFs acted as couplers for splitting and recombining light due to mismatch of mode field diameter. The cladding of the FMF was corroded with hydrofluoric acid, and a layer of graphene oxide (GO) film was coated on the corroded cladding of FMF via the natural deposition method. The refractive index of GO varied upon absorption the water molecules. As a result, the phase difference of the MZI varied and the wavelength of the resonant dip shifted with a change in the ambient relative humidity (RH). High humidity sensitivity of 0.191 and 0.061 nm/%RH in the RH range of 30-55% and 55-95%, respectively, were achieved experimentally. The high sensitivity, compact size, and simple manufacturing of the proposed sensor could offer attractive applications in fields of chemical sensors and biochemical detection.

Vanadium dioxide (VO₂) is a temperature phase change material that has metallic properties at high temperatures and insulation properties at room temperature. In this article, a novel device has been designed based on the dielectric metasurface consisting of VO₂ and graphene array, which can achieve multiple functions by adjusting temperature and voltage. When the temperature is high (340 K), the device is in the absorption state and its absorptivity can be dynamically controlled by changing the temperature. On the other hand, the device is in the polarization state under room temperature, and the polarization of electromagnetic waves can be dynamically controlled by adjusting the voltage of graphene. This device can achieve a broadband absorber (the maximum absorptance reaches 99.415% at wavelengths ranging from 44 THz to 52 THz) and high polarization conversion efficiency (>99.89%) in the mid-infrared range, which has great advantages over other single-function devices. Our results demonstrate that this multifunctional device may have widespread applications in emitters, sensors, spatial light modulators, IR camouflages, and can be used in thermophotovoltaics and wireless communication.

Focus-tunable metalenses play an indispensable role in the development of integrated optical systems. In this paper, the phase change material Sb₂S₃ is used in a thermally modulated varifocal metalens based on PB-phase for the first time. Sb₂S₃ not only has a real part of refractive index shift between the amorphous and crystalline state but also has low losses in both amorphous and crystalline states in the near-infrared region. By switching Sb₂S₃ between the two states, a metalens doublet with a variable focal length is proposed. Moreover, the full width at half maximum of each focal point is close to the diffraction limit. And the focusing efficiency can be over 50% for the two focal points. Together with the advantage of precise thermal control, the proposed metalens has great potential in the application of multi-functional devices, biomedical science, communication and imaging.

A single core-offset Mach-Zehnder interferometer (MZI) coated with polyvinyl alcohol (PVA) for simultaneous measurement of relative humidity (RH) and temperature is proposed in this paper. The sensing structure is fabricated by splicing dispersion compensating fiber (DCF) and no-core fiber (NCF) and splicing two single-mode fibers (SMF) at both ends, where the core-offset is located at the splicing of SMF and DCF. A part of the cladding of DCF is etched to excite the high-order cladding mode (LP₁₀), and PVA is coated on the etched area. The refractive index of PVA varies due to the adsorption of water molecules. Therefore, when the ambient relative humidity and temperature change, the change of MZI phase difference causes the wavelength of the resonant dip to shift. The experimental results indicate that the proposed sensor has a sensitivity of 0.256 nm/RH% for RH range of 30%-95%, and a sensitivity of 0.153 nm/℃ for temperature range of 20℃-80℃, respectively. The simultaneous measurement of RH and temperature can be achieved by demodulating the sensitivity coefficient matrix. The proposed sensor has the characteristics of good repeatability, high sensitivity, and good stability, which make it potentially applications for the detection of RH and temperature measurement.