Carbon fiber reinforced epoxy and nylon were measured by means of potentiodynamic polarization, potentiostatic polarization and AC electrochemical impedance spectroscopy (EIS) in a solution containing 0.9wt% NaCl, 0.1wt% CaCl2 and 0.075wt% NaHCO3. Their microstructures were examined by SEM. The results showed that these two types of carbon fiber reinforced polymers (CFRPs) were electrically conductive and electrochemically noble, and exhibited different EIS characteristics. Strong anodic and cathodic polarization could damage their surface polymer layers. Based on their different microstructures and electrochemical behaviors, a surface polymer layer model was proposed for these CFRPs.
The electrochemical activity of a carbon fiber was characterized at different potentials in 3.5 wt.% NaCl solution, and the fiber cylindrical surface changed by polarization at different potentials was revealed by SEM, AFM, optical microscopy, FTIR spectroscopy, Raman spectroscopy, and XRD. The results showed that the carbon fiber exhibited different electrochemical activities at some polarization potentials; within a 3V potential range the anodic and cathodic polarization current densities stepped up by more than 5 orders of magnitude, and the carbon fiber (CF) surface dramatically changed with time. Strong anodic polarization appeared to facilitate the breakdown of C-C covalent bonds in the carbon fiber and enhance the amorphization of the fiber surface.
Purpose: This study aims to propose a simple experimental method to distinguish the galvanic corrosion, crevice corrosion and self-corrosion in metal/carbon fiber reinforced polymer (CFRP) joints. Design/methodology/approach: The corrosion behaviors of four different galvanic couples, whose anodes were Zn-coated DP590 steel and Al 6022, and cathodes were two kinds of CFRP, were investigated in immersion and GMW14872 cyclic conditions. Findings: The results showed that the galvanic corrosion caused by direct contact between CFRP and metals was more serious than that caused by the jointing bolts. The corrosion damage caused by crevice corrosion was severer than that caused by galvanic corrosion. Self-corrosion was also significant, particularly under the cyclic salt spray condition. Practical implications: Cyclic salt spray test may more reliably simulate the galvanic corrosion of a joint in industrial service environments, and real corrosion damage may be underestimated by a galvanic current measurement. Originality/value: A deeper understanding of different corrosion mechanisms involved in CFRP/metal joints under different service conditions in industry has been given.
Microporous metals are extensively applied in convective cooling of high heat flux systems such as electronics. Traditional fabrication approaches, such as sintering of metallic particles, however, produce materials with limited fluid transport capability. Here, we demonstrate control and enhancement of the permeability of porous copper inverse opals produced via electrodeposition around a sacrificial polymer template. Sintering of the template is used to control the fluid transport network microstructure, with permeability increasing for increasing sintering times. These electrodeposited structures achieve permeabilities greater than 1×10−12 m2 with 5 μm pores, roughly 5 times larger than those of porous sintered copper with comparable feature sizes. The high permeability and small feature sizes, with attendant high specific surface area and strong capillarity, offered by the sintered template electrodeposited copper are attractive for two phase cooling applications.