In this paper, a novel integrated real-time trajectory planning and tracking control framework capable of dealing with autonomous ground vehicle (AGV) parking maneuver problems is presented. In the motion planning component, a newly-proposed idea of utilizing deep neural networks (DNNs) for approximating optimal parking trajectories is further extended by taking advantages of a recurrent network structure. The main aim is to fully exploit the inherent relationships between different vehicle states in the training process. Furthermore, two transfer learning strategies are applied such that the developed motion planner can be adapted to suit various AGVs. In order to follow the planned maneuver trajectory, an adaptive learning tracking control algorithm is designed and served as the motion controller. By adapting the network parameters, the stability of the proposed control scheme, along with the convergence of tracking errors, can be theoretically guaranteed. In order to validate the effectiveness and emphasize key features of our proposal, a number of experimental studies and comparative analysis were executed. The obtained results reveal that the proposed strategy can enable the AGV to fulfill the parking mission with enhanced motion planning and control performance. Note to Practitioners—This article was motivated by the problem of optimal automatic parking planning and tracking control for autonomous ground vehicles (AGVs) maneuvering in a restricted environment (e.g., constrained parking regions). A number of challenges may arise when dealing with this problem (e.g., the model uncertainties involved in the vehicle dynamics, system variable limits, and the presence of external disturbances). Existing approaches to address such a problem usually exploit the merit of optimization-based planning/control techniques such as model predictive control and dynamic programming in order for an optimal solution. However, two practical issues may require further considerations: 1). The nonlinear (re)optimization process tends to consume a large amount of computing power and it might not be affordable in real-time; 2). Existing motion planning and control algorithms might not be easily adapted to suit various types of AGVs. To overcome the aforementioned issues, we present an idea of utilizing the recurrent deep neural network (RDNN) for planning optimal parking maneuver trajectories and an adaptive learning NN-based (ALNN) control scheme for robust trajectory tracking. In addition, by introducing two transfer learning strategies, the proposed RDNN motion planner can be adapted to suit different AGVs. In our follow-up research, we will explore the possibility of extending the developed methodology for large-scale AGV parking systems collaboratively operating in a more complex cluttered environment.

This paper describes a novel control technique to deal with networked control systems with random communication time delay, which is known to highly degrade the control performance of the controlled system. This problem can be solved using a modified model predictive control, which uses the future control sequence to compensate for the forward communication time delay. Also, using a model predictor, the time delay in the backward channel can be compensated as well. Another key part of this paper is to analyse the stability of the networked control systems. The analytical criteria are obtained for both fixed and random communication time delays. The simulation results and practical experiments illustrate that the proposed controller design is realistic.

This article focuses on the design, test, and validation of a deep neural network (DNN)-based control scheme capable of predicting optimal motion commands for autonomous ground vehicles (AGVs) during the parking maneuver process. The proposed design utilizes a multilayer structure. In the first layer, a desensitized trajectory optimization method is iteratively performed to establish a set of time-optimal parking trajectories with the consideration of noise-perturbed initial configurations. Subsequently, by using the preplanned optimal parking trajectory data set, several DNNs are trained in order to learn the functional relationship between the system state-control actions in the second layer. To obtain further improvements regarding the DNN performances, a simple yet effective data aggregation approach is designed and applied. These trained DNNs are then utilized as the motion controllers to generate feedback actions in real time. Numerical results were executed to demonstrate the effectiveness and the real-time applicability of using the proposed control scheme to plan and steer the AGV parking maneuver. Experimental results were also provided to justify the algorithm performance in real-world implementations.

In this article, the problem of optimal time-varying attitude tracking control for rigid spacecraft with system constraints and unknown additive disturbances is considered. Through the design of a new nonlinear tube-based robust model predictive control (TRMPC) algorithm, a dual-loop cascaded tracking control framework is established. The proposed TRMPC algorithm explicitly considers the effect of disturbances and applies tightened system constraints to predict the motion of the nominal system. The obtained optimal control action is then combined with a nonlinear feedback law such that the actual system trajectories can always be steered within a tube region centered around the nominal solution. To facilitate the recursive feasibility of the optimization process and guarantee the input-to-state stability of the tracking control process, the terminal controller and the corresponding terminal invariant set are also constructed. The effectiveness of using the proposed dual-loop TRMPC control scheme to track reference attitude trajectories is validated by experimental studies. A number of comparative studies were carried out, and the obtained results reveal that the proposed design is able to achieve more promising constraint handling and attitude tracking performance than that of the other newly developed methods investigated in this research.

This article studies the problem of trajectory optimization for autonomous ground vehicles with the consideration of irregularly placed on-road obstacles and multiple maneuver phases. By introducing a series of event sequences, a new multiphase constrained optimal control formulation is constructed to describe the automatic overtaking process. Although existing trajectory optimization techniques can be applied to address the constructed problem, they may suffer from poor or premature convergence issues due to the complexity of the mission formulation. Thus, to offer an effective alternative, a novel desensitized trajectory optimization method is designed and implemented to explore the optimal overtaking maneuver for the AGVs. The proposed method applies a double layer structure, where an enhanced intelligent optimization method is used in the outer layer such that the main inner optimization routine can be boosted by starting at a better reference solution. The algorithm convergence as well as the solution optimality conditions are theoretically analyzed. Numerical results are provided to illustrate the validity of the established formulation. Comparative case studies were executed to demonstrate the quality of the obtained solution and the enhanced performance of the proposed trajectory optimization method.

A two step strategy is developed for trajectory planning and guidance of a hypersonic vehicle (HV) in the reentry phase. The first step A two step strategy is developed for real-time trajectory planning of a hypersonic vehicle (HV) in the reentry phase. The first step generates the optimal trajectory for the HV using a recently-proposed fuzzy multi-objective transcription method. In the second step, the optimally generated trajectories are utilized to train a deep neural network (DNN) which is then acted as the optimal command generator in real-time. A detailed simulation study was carried out to verify the effectiveness and real-time applicability of the proposed integrated design. The DNN-driven controller is further compared against other optimization-based techniques existing in relative works. Moreover, extension works on the real-time trajectory planning of a 6DoF HV model were performed. The results confirm the feasibility and reliability of applying the proposed method for the planning of hypersonic vehicle entry flight path in real-time.