With the advent of optical sensors, thermal-based indicators can be retrieved at multiscale levels from handheld devices to satellite platforms, providing a low-cost method to mirror plant water status. Here, we measured the canopy temperature of Orange trees subjected to different irrigation levels (100%, 75%, and 50% of crop water requirement) and strategies (regulated deficit irrigation (DI) and partial root drying (PRD)) to determine the crop water stress index (CWSI). Additionally, the CWSI was estimated based on Land Remote-Sensing Satellite (Landsat) thermal data using hot-cold patches (approach 1) and a novel mechanistic method combined with Sentinel-2 data (approach 2). Based on the in-situ measurements, the CWSI non-water stressed baseline was estimated as Tc – Ta = −0.57 × (VPD) + 2.31 (N = 370, R2 = 0.82), defining ‘VPD’ as ‘vapour pressure deficit’, and the upper limit was found to be relatively constant (Tc – Ta = 3.43°C). The in-field water stress variability among the different irrigation levels was effectively captured using the CWSI; however, the difference between the DI and PRD irrigated trees was only significant at the 50% irrigation level. Considering the remotely-sensed approach, the CWSI from our proposed method (approach 2) resulted in higher accuracy (root mean square error, RMSE = 0.03; mean bias error, MBE = −0.02) compared to approach 1 (RMSE = 0.10, MBE = −0.08). The improved accuracy from our proposed method was attributed to accounting for VPD and net radiation, applying an iterative method to calculate and calibrate aerodynamic resistance, and the use of high-resolution imagery from Sentinel-2 for reducing the soil background impact on canopy temperature.
Prior evaluations of the relationship between COVID-19 and weather indicate an inconsistent role of meteorology (weather) in the transmission rate. While some effects due to weather may exist, we found possible misconceptions and biases in the analysis that only consider the impact of meteorological variables alone without considering the urban metabolism and environment. This study highlights that COVID-19 assessments can notably benefit by incorporating factors that account for urban dynamics and environmental exposure. We evaluated the role of weather (considering equivalent temperature that combines the effect of humidity and air temperature) with particular consideration of urban density, mobility, homestay, demographic information, and mask use within communities. Our findings highlighted the importance of considering spatial and temporal scales for interpreting the weather/climate impact on the COVID-19 spread and spatiotemporal lags between the causal processes and effects. On global to regional scales, we found contradictory relationships between weather and the transmission rate, confounded by decentralized policies, weather variability, and the onset of screening for COVID-19, highlighting an unlikely impact of weather alone. At a finer spatial scale, the mobility index (with the relative importance of 34.32%) was found to be the highest contributing factor to the COVID-19 pandemic growth, followed by homestay (26.14%), population (23.86%), and urban density (13.03%). The weather by itself was identified as a noninfluential factor (relative importance < 3%). The findings highlight that the relation between COVID-19 and meteorology needs to consider scale, urban density and mobility areas to improve predictions.
A simple Landsat-MODIS (Moderate Resolution Imaging Spectroradiometer) fusion model was used to generate 30-m resolution evapotranspiration (ET) maps for the 2010 growing season over a heterogeneous sparse vegetation, agricultural region using the METRIC (mapping evapotranspiration with internalized calibration) algorithm. The fusion model performance was evaluated, and experiments were undertaken to investigate the frequency for updating Landsat-MODIS data into the fusion model during the growing season, to maintain model accuracy and reduce computation. Initial evaluation of the fusion model resulted in high bias stemming from the landscape heterogeneity and small landholdings. To reduce the bias, the fusion model was modified to be applicable pixel-wise (i.e., implementing specific pixels for generating outputs), and an NDVI-based (Normalized Difference Vegetation Index) coefficient was added to capture crop phenology. A good agreement that resulted from the comparison of the fused and non-fused maps with root mean square error (RMSE) of 0.15 mm day−1 with coefficient of determination (R2) of 0.83 indicated successful implementation of the modifications. Additionally, the fusion model performance was evaluated against in-situ observation at the pixel level as well as the watershed level to estimate seasonal ET for the growing season. The default METRIC model (Landsat only) yielded relative error (RE) of 31% and RMSE of 2.44 mm day−1, while using the modified fusion model improved the accuracy resulting in RE of 3.5% with RMSE of 0.37 mm day−1. Considering different data frequency update, the optimal fusion experiment (RMSE of 0.61 mm day−1, and RE of 6.5%) required the consideration of the crop phenology and weekly updates in the early growing stage and harvest time, and bi-weekly for the rest of the season. The resulting fusion model for ET output is planned to be a part of ET mapping and irrigation scheduling systems.
This study evaluates the impact of land surface models (LSMs) and urban heterogeneity [using local climate zones (LCZs)] on air temperature simulated by the Weather Research and Forecasting model (WRF) during a regional extreme event. We simulated the 2017 heatwave over Europe considering four scenarios, using WRF coupled with two LSMs (i.e., Noah and Noah‐MP) with default land use/land cover (LULC) and with LCZs from the World Urban Database and Access Portal Tools (WUDAPT). The results showed that implementing the LCZs significantly improves the WRF simulations of the daily temperature regardless of the LSMs. Implementing the LCZs altered the surface energy balance partitioning in the simulations (i.e., the sensible heat flux was reduced and latent heat flux was increased) primarily due to a higher vegetation feedback in the LCZs. The changes in the surface flux translated into an increase in the simulated 2‐m relative humidity and 10‐m wind speed as well as changed air temperature within cities section and generated a temperature gradient that affected the temperatures beyond the urban regions. Despite these changes, the factor separation analysis indicated that the impact of LSM selection was more significant than the inclusion of LCZs. Interestingly, the lowest bias in temperature simulations was achieved when WRF was coupled with the Noah as the LSM and used WUDAPT as the LULC/urban representation.