Carbon-based structures are the most versatile materials used in the modern field of renewable energy (i.e., in both generation and storage) and environmental science (e.g., purification/remediation). However, there is a need and indeed a desire to develop increasingly more sustainable variants of classical carbon materials (e.g., activated carbons, carbon nanotubes, carbon aerogels, etc.), particularly when the whole life cycle is considered (i.e., from precursor “cradle” to “green” manufacturing and the product end-of-life “grave”). In this regard, and perhaps mimicking in some respects the natural carbon cycles/production, utilization of natural, abundant and more renewable precursors, coupled with simpler, lower energy synthetic processes which can contribute in part to the reduction in greenhouse gas emissions or the use of toxic elements, can be considered as crucial parameters in the development of sustainable materials manufacturing. Therefore, the synthesis and application of sustainable carbon materials are receiving increasing levels of interest, particularly as application benefits in the context of future energy/chemical industry are becoming recognized. This review will introduce to the reader the most recent and important progress regarding the production of sustainable carbon materials, whilst also highlighting their application in important environmental and energy related fields.

Highly internal phase emulsion (polyHIPE) materials are promising macrocellular foams bearing versatile applications ranging from catalysis, optics, filtration, insulator and so forth. In this critical reviewwater-in-oil HIPE, oil-in-water HIPE and Pickering-based HIPE are discussed. Also in each above-mentioned HIPE family, declination between the organic, inorganic or hybrid-organic foams chemical nature is proposed. The polyHIPE audience is thereby strongly interdisciplinary in nature crossing boundaries of physical chemistry, colloids, polymer science, sol–gel chemistry, hybrid materials, biology and beyond (114 references).

Carbon hollow spheres were produced using a sustainable approach, i.e. hydrothermal carbonization, using monosaccharides as carbon precursors and silica nanoparticles as hard-templates. Hydrothermal carbonization is an eco-efficient and cost-effective route to synthesize nanostructured carbonaceous materials from abundant biomass-derived molecules. After further thermal treatment under an inert atmosphere and removal of the silica-based core by chemical etching, porous hollow spheres depicting 5–8 nm thin shells were obtained. Subsequently, carbon–sulfur composites were synthesized via a melt diffusion method and used as nanostructured composites for cathodes in lithium–sulfur (Li–S) cells. The morphology of the hollow spheres was controlled and optimized to achieve improved electrochemical properties. Both high specific energies and high specific powers were obtained, due to the unique nanostructure of the hollow spheres. These results revealed that using optimized carbonaceous materials, it is possible to design sustainable Li–S cells showing promising electrochemical properties.