Vertical structured GaN power devices have recently been attracting a great interest because of their potential on extremely high-power conversion efficiency. This letter describes increased breakdown voltages in the vertical GaN p-n diodes fabricated on the free-standing GaN substrates. By applying multiple lightly Si doped n-GaN drift layers to the p-n diode, the record breakdown voltages (V B ) of 4.7 kV combined with low specific differential ON-resistance (R ON ) of 1.7 mΩcm 2 were achieved. With reducing the Si-doping concentration of the top n-GaN drift layer adjacent to the p-n junction using well-controlled metal-organic vapor phase epitaxy systems, the peak electric field at the p-n junction could be suppressed under high negatively biased conditions. The second drift layer with a moderate doping concentration contributed to the low R ON . A Baliga's figure of merit (V B2 /R ON ) was 13 GW/cm 2 . These are the best values ever reported among those achieved by GaN p-n junction diodes on the free-standing GaN substrates.
21 July 2017 in Japanese Journal of Applied Physics
Thick (20–30 µm) layers of highly pure GaN with device-quality smooth as-grown surfaces were prepared on freestanding GaN substrates by using our advanced hydride-vapor-phase epitaxy (HVPE) system. Removal of quartz parts from the HVPE system markedly reduced concentrations of residual impurities to below the limits of detection by secondary-ion mass spectrometry. Appropriate gas-flow management in the HVPE system realized device-quality, smooth, as-grown surfaces with an excellent uniformity of thickness. The undoped GaN layer showed insulating properties. By Si doping, the electron concentration could be controlled over a wide range, down to 2 × 10 14 cm −3 , with a maximum mobility of 1150 cm 2 ·V −1 ·s −1 . The concentration of residual deep levels in lightly Si-doped layers was in the 10 14 cm −3 range or less throughout the entire 2-in. wafer surface. These achievements clearly demonstrate the potential of HVPE as a tool for epitaxial growth of power-device structures.
Vertical structure GaN power devices fabricated on freestanding GaN substrates have high potentials in ideally efficient energy conversion systems. This letter describes successful acquisition of high avalanche capabilities for high breakdown voltage GaN p-n junction diodes. We have already reported the high avalanche capability by applying a punch-through structure in p-GaN layer, however; the structure caused a drawback of increase in on-resistance and turn-on voltage. By applying a newly developed two-step mesa structure consisting of the first inner mesa with partially thinned p-GaN layer and the second outer mesa etched to n-GaN drift layer, the high avalanche capabilities with reversible current-voltage characteristics have been realized at high breakdown voltages of 4.7-4.8 kV without sacrificing the forward I-V characteristics. The two-step mesa structure transferred the position of the peak electric field in the p-n junction from the dry-etch damaged second outer mesa to the first mesa covered by the thinned p-GaN layer, which could lead the mild breakdown. The high avalanche capability was obtained with good reproducibility regardless of the anode electrode diameter. This structure can contribute to the construction of robust power systems.
Certain undesired phenomena are observed in n-GaN layers grown by metal–organic chemical vapor deposition (MOCVD) due to the unavoidable C-induced carrier compensation. They are a drastic reduction in carrier mobility, called mobility collapse, and significant non-uniformity in the carrier concentration due to the off-angle dependence of the C-incorporation efficiency of the process. These phenomena are particularly severe for low doping levels between 1015 and 1016/cm3, which are suitable for fabricating drift layers used in vertical-type GaN power devices that operate in the range of a few kilovolts to tens of kilovolts. However, the C-related undesired characteristics are absent in homo-epitaxial n-GaN layers grown by quartz-free hydride vapor phase epitaxy (QF-HVPE), recently developed by us. The utilization of C-free raw materials alongside quartz-free parts enables the growth of highly pure GaN crystals with negligible Si, C, and O incorporations. These crystals exhibited an electron concentration in the low-1015/cm3 range with the highest reported room temperature electron mobility, μ, of 1470 cm2/V s among GaN crystals, whereas n-GaN layers with similar carrier concentrations but containing C-compensation, as in the case of those grown by MOCVD, exhibited a severe mobility collapse (μ = 288 cm2/V s). High uniformity in the carrier concentration with a small standard deviation of 4.0% was observed in a 2-in. n-GaN wafer grown by QF-HVPE on a GaN substrate with an off-angle variation of 0.3°. On the other hand, the standard deviation of the carrier concentration in wafers grown by MOCVD was approximately 17% because of the off-angle-dependent C-incorporation.
1 April 2011 in Japanese Journal of Applied Physics
(K,Na)NbO3 (KNN) films with high transverse piezoelectric coefficients were successfully deposited onto Pt/Ti/SiO2/Si substrates by RF magnetron sputtering. These films were polycrystalline and had pseudo-cubic perovskite structures with preferential orientation. To improve their piezoelectric properties, we investigated the effects of annealing after the deposition and the Na/(K+ Na) ratio of the films. Annealing in air at 750 °C led to a decrease in the residual strain in the KNN crystal and the disappearance of openings at the grain boundary, thereby improving the transverse piezoelectric coefficient and leakage current properties. We also investigated the transverse piezoelectric coefficient and dielectric constant as a function of the Na/(K+ Na) ratio; both had maximum values at a ratio of approximately 0.55. For the KNN films, e31* ranged between -10.0 and -14.4 C/m2; thus, it was superior to previously reported values for lead-free piezoelectric films and was comparable to the best commercially available Pb(Zr,Ti)O3 films.