Mesozoic sandstone aquifers in the North German Basin offer significant potential to provide green and sustainable geothermal heat as well as large-scale storage of heat or chill. The determination of geothermal and subsurface heat storage potentials is still afflicted with obstacles due to sparse and partly uncertain subsurface data. Relevant data include the structural and depositional architecture of the underground and the detailed petrophysical properties of the constituting rocks; both are required for a detailed physics-based integrated modeling and a potential assessment of the subsurface. For the present study, we combine recently published basin-wide structural interpretations of depth horizons of the main stratigraphic formations, with temperature data from geological and geostatistical 3D models (i.e., CEBS, GeotIS). Based on available reservoir sandstone facies data, additional well-log-based reservoir lithology identification, and by providing technical boundary conditions, we calculated the geothermal heat in place and the heat storage potential for virtual well doublet systems in Mesozoic reservoirs. This analysis reveals a large potential for both geothermal heating and aquifer thermal energy storage in geologically favorable regions, and in many areas with a high population density or a high heat demand. Given the uncertainties in the input data, the applied methods and the combination of data from different sources are most powerful in identifying promising regions for economically feasible subsurface utilization, and will help decrease exploration risks when combined with detailed geological site analysis beforehand.
A successful utilization of deep geothermal resources requires accurate predictions about the distribution of reservoir temperature as well as of the hydraulic processes exerting a direct influence on the productivity of geothermal reservoirs. The aim of this study was to investigate and quantify the influence that regional thermo-hydraulic processes have on the geothermal configuration of potential reservoirs in the German Federal State of Hesse. Specifically, we have addressed the question of how the regional thermal and hydraulic configuration influence the local hydro-thermal reservoir conditions. Therefore, a 3D structural model of Hesse was used as a basis for purely hydraulic, purely thermal and coupled 3D thermo-hydraulic simulations of the deep fluid flow and heat transport. As a result of our numerical simulations, Hesse can be differentiated into sub-areas differing in terms of the dominating heat transport process. In a final attempt to quantify the robustness and reliability of the modelling results, the modelling outcomes were analyzed by comparing them to available subsurface temperature, hydraulic and hydrochemical data.
We use a fully coupled hydro-thermal model (TH) to quantify changes in the pore pressure and temperature distribution following the Last Glacial Maximum (LGM) in the intracontinental basins in Central and Northern Europe. We demonstrate that even without considering a direct mechanical coupling from the visco-elastic lithosphere rebound, the system is, at present-day, in a state of hydrogeologic and thermal disequilibrium as a result of the past ice sheet dynamics. We find that the local geology exerts an additional control on the subsurface response to imposed glacial loading, as evidenced by a contrasting thermal and pore pressure configuration in time and space. Highest rates of pore pressure dissipation are restricted to crustal domains that underwent substantial glacial loading, while the majority of the sedimentary sub-basins show a prominent signature of hydraulic disequilibrium (overpressure) at present. Groundwater-driven convective cooling and heating during the advance and retreat of the ice cap occurred mainly within sedimentary rocks, domains where thermal equilibration is ongoing. The spatial correlation between modeled pore pressure dissipation rates and postglacial uplift rates is indicative of a complex and transient hydrogeological system structurally connected to the viscous tail of the ongoing isostatic adjustment after the LGM, with important implications for assessing the long-term mechanical stability of this intraplate setting.
Knowing the thermal and hydraulic conditions below major urban centers is of increasing importance in the context of energy and water supply. With this study, focusing on the major urban center of Berlin, Germany, we aim to gain insights on the coupling of surface water bodies to the subsurface thermal and hydraulic field investigating shallow water to deep groundwater interactions. Therefore, we use a 3D structural model of the subsurface, constrained by all available data and observations, as a base for simulations of the coupled transport of fluid and heat. This model resolves the 3D configuration of the main geological units and thus enables us to account for related heterogeneities in physical properties. Additionally, we resolve surface water body geometries with newly available data. To assess how surface water bodies interact with the deeper groundwater at different depths in the model domain, the influence of different hydraulic boundary conditions is quantified, which indicates that the coupling of surface water bodies and groundwater strongly modifies predicted groundwater circulation. Consequently, changes in subsurface temperatures are also predicted, where lakes may account for temperature differences up to ±5°C and rivers could account for up to ±1°C visible at depths ≤-500 m.a.s.l. These differences are mainly connected to changes in the advective component of heat transport caused by the modifications of the hydraulic boundary condition. Pressure-driven heat transport is most efficient where differences between hydraulic heads of aquifers and surface water bodies are highest. This study therefore illustrates the impact of surface to subsurface water interactions in an urban context.
In this study we make use of 3-D hydraulic simulations to investigate the regional groundwater flow in the Upper Rhine Graben. The modeling is based on an existing detailed 3-D structural model covering the whole Upper Rhine Graben from the surface down to 14 km of depth. The overall goal of this study is to provide some quantitative analysis on the role of the hydraulic head topology in shaping the underground hydrodynamics by taking into account interactions with the heterogeneous subsurface sedimentary configuration of the basin system. Therefore, the main question addressed by this study can be summarized as follows: does the deep graben flow follow the topographic gradient and the flow direction of the river Rhine from the Alps northward to the northernmost area of the Upper Rhine Graben? Our results demonstrate the presence of a regional subsurface flow in the sedimentary rocks aligning from the graben flanks towards its center and in the southern half of the graben from south to north. The graben-parallel flow velocity is found to be about 1 order of magnitude lower than the velocity predicted perpendicular to the main graben axis. Besides these general trends, the modeling highlights local heterogeneities in the shallow 3-D flow field. Those arise from the interaction between regional groundwater flow and the heterogeneous sedimentary configuration. Within the Cenozoic sediments forming the uppermost aquifer in the model, groundwater flows are driven by imposed hydraulic gradients from recharge areas located at higher elevations in the Black Forest and Vosges Mountains to the discharge region at a lower elevation in the Rhine valley. The presence of a regional aquitard (Keuper) separating the shallow and the deeper aquifer system (Muschelkalk, Buntsandstein, and Rotliegend) hinders hydraulic connection among the two aquifer systems. This is exemplified by the development of a flow system in the deeper aquifers, which shows a more continuous graben-parallel south–north direction. Based on these results we can conclude that both the hydraulic head topology and the level of structuration of the sedimentary sequence exert a 1st-order role in shaping the regional flow system at depth. The regional model predicts a heterogeneous flow system within the upper 4 km of the Upper Rhine Valley, where flow velocities in the graben valley can reach up to 45 mm yr−1 in the upper and lower aquifers. Back to the current conceptual hydrogeological model, the results question the presence of a graben through northward flow, being limited to the southern half of the graben. In the north, the groundwater dynamics turn out to be more complex, being structurally linked to the local geology. This calls for additional studies with a higher level of both structural and stratigraphic attributes in order to arrive at a better quantification of the local to the regional groundwater dynamics in the area.
The goal of this study is to quantify the influences of upper hydraulic and temperature boundary conditions on temperatures as calculated by 3D numerical simulations of coupled fluid-and-heat transport for the subsurface of Berlin. Both, the underlying structural model, as well as the sensitivity analysis are data-driven. The results show that the subsurface thermal field is strongly influenced by hydraulic and thermal boundary conditions. Findings of this study suggest that in the model area conductive heat transport processes are able to compensate the influence of advection by pressure gradients. Also, anthropogenic influences on the subsurface thermal field could be quantified