Mouthpart structures were observed in four species of Largidae using scanning electron microscopy to investigate their morphological disparity, and linked to changes in feeding specialization. The examined species are pests that feed mainly on seeds and plant sap of forbs, shrubs, and trees. Their external mouthparts are described in detail for the first time herein. The cone-like labrum and four-segmented tube-like labium are shorter in Physopelta species than in Macrocheraia grandis (Grey). The labium surface in all studied species bears nine types of sensilla (St1-St2, Sb1-3, Sch, Sca1-2, Sm). The distributions of sensilla on particular labial segments varies among the studied species. The tripartite apex of the labium consists of two lateral lobes and an apical plate that is partly divided in Physopelta species, and not divided in Macrocheraia. Each lateral lobe possesses a sensillar field with 10 thick-walled uniporous sensilla basiconica, one multiporous sensillum styloconicum, and one long non-porous hair sensillum. Each mandibular stylet tip in M. grandis has a central tooth placed anteriorly and pairs of teeth arranged dorso-laterally. In Physopelta, there are one or two central teeth placed anteriorly but two pairs of teeth dorso-laterally. In all studied species, the inner surfaces of the mandibular stylets have scale-like projections. A left–right asymmetry of the maxillary stylets is noticeable; the external end of the right maxillary stylet is smooth and slightly tapered in M. grandis and evidently wider (spoon–like) in the three species of Physopelta, while the left end of the stylets is straight and narrow in M. grandis in contrast to Physopelta, in which the end is straight and wide. No differences in the internal structure of the maxillary stylets were observed among the studied species. Based on structural differences, we inferred that the mandibles and maxillae are more adapted for seed-sucking in Physopelta species than in M. grandis. M. grandis has the ends of the maxillae more narrowed, a trait more adapted for sucking sap from phloem or parenchymal cells.

Mouthpart structures were observed in three species of Asopinae using scanning electron microscopy to investigate their morphological disparity. The examined species attack mainly slow-moving, soft-bodied insects, primarily larval forms of the Lepidoptera, and are the natural enemies of many pests. This is the first detailed description of their external mouthparts. The triangular and elongated labrum and four-segmented tube-like labium are longer in Picromerus species (Picromerus bidens (Linnaeus, 1758) and Picromerus lewisi Scott, 1874 than in Cazira bhoutanica Schouteden, 1907. The labrum of P. lewisi and C. bhoutanica appear to be equipped with olfactory sensilla basiconica Sb3, a special type of sensilla with nanopores. The labium surface in all studied species bears 14 types of sensilla (St1–St4, Sb1–7, Sst, Sca1–2). A new characteristic of sensilla trichodea is represented in sensillum St1; in both Picromerus species, it is classified as an olfactory sensillum with nanopores. The tripartite apex of the labium consists of two lateral lobes and a central membranous lobe having microtrichial extensions. Each lobe has one sensory field, including sensilla basiconica (Sb7), sensilla styloconica (Sst), and sensilla trichodea (St4). In the three studied predatory stink bugs, each mandibular stylet tip has five irregular teeth and three long, pointed hooks. The two opposing maxillae, which are held together by a tongue-and-groove system, form a food canal and a salivary canal. The apices of the right maxilla have small teeth and few short barbs along the edge of the food canal. In P. bidens and P. lewisi, there are 5 teeth, while in C. bhoutanica there are 2. Based on structural differences, we inferred that the hook-shaped mandibular teeth, right maxilla with small teeth, and few short barbs along edge of the food canal are more adapted for a predatory lifestyle. Predatory stink bugs use sharp recurved hooks and irregular teeth penetrating, tearing, or filing devices that aid in the mechanical disruption of host tissue. Stiff bristles in the food canal may indicate their possible adaptation to feeding on insect larvae. The evolution of mouthpart morphology and the putative functional significance of sensilla are discussed, providing insight into the sensory mechanism.

To obtain a better understanding of feeding adaptations, the fine structure of the mouthparts in adults of Cheilocapsus nigrescens Liu and Wang, including the sculpture and interlocking mechanisms of the stylets and distribution and abundance of sensilla located on the labium, were studied using scanning electron microscopy. The mouthparts are similar to those of previously studied mirid species in most aspects and composed of a cone-shaped labrum, a tube-like, four-segmented labium with a deep groove on the anterior side, and a stylet fascicle consisting of two mandibular and two maxillary stylets. Each mandibular stylet tip has about 6–8 indistinctive notches, which help in penetrating the leaf surface. A series of transverse squamous textures are present on the adaxial surface of the mandibular stylets. The maxillary stylets interlock to form a food canal and a salivary canal, equipped with an external longitudinal process that engages grooves in the mandibular stylets. Three kinds of sensilla, including four types of sensilla basiconica (I, II, III, and IV), four types of sensilla trichodea (I, II, III, and IV), and one type of sensillum campaniformium, occur at different locations on the labium. Among them, sensilla trichodea I and II are the most abundant; sensilla basiconica II occurs between the first segment and second segment, and between the third and fourth segment. The tripartite apex of the labium consists of two lateral lobes and an apical plate. Each lateral lobe possesses a field of 11 sensilla basiconica IV and 1 sensillum trichodeum IV. The morphology of the mouthparts and the distribution of sensilla located on the labium in C. nigrescens are discussed with respect to their possible taxonomic and functional significance. In particular, the indistinct notches of the mandibular stylet and smooth inner surface of the right maxillary stylets are suited primarily for phytophagy.

The yellow marmorated stink bug, Erthesina fullo (Thunberg, 1783), is a major pest of certain tree fruits in Northeast Asia. To better understand the feeding mechanism of E. fullo, the fine structure of the mouthparts, including the distribution and abundance of sensilla, are examined with scanning electron microscopy (SEM), and their functions are observed directly under laboratory conditions. The feeding performance is described in detail and illustrated for the first time. The adult feeding process involves several steps, including exploring and puncturing of the host plant epidermis, a probing phase, an engorgement phase, and removal of the mouthparts from the host tissue. Proceeding from labium towards the mandibular stylets, the movement pattern becomes increasingly stereotypical, including the sensilla on the tip of the labium probing, the labium making an elbow-like bend between the first and second segment, the base of the stylet fascicle housing in the groove of the labrum, the mandibular stylets penetrating the site and maxillary stylets feeding. In terms of morphology, the mouthparts are similar to those of other Heteroptera, consisting of a triangular pyramidal labrum, a tube-like and segmented labium with a deep groove on the anterior side, and a stylet fascicle consisting of two mandibular and two maxillary stylets. The four-segmented labium has five types of sensilla basiconica, three types of sensilla trichodea, two types of sensilla campaniformia and 1 type of sensilla coeloconica. Among them, sensilla trichodea one and sensilla basiconica one are most abundant. The tripartite apex of the labium is covered with abundant sensilla trichodea three and a few sensilla basiconica 5. The mandibular stylet tips have two nodules preapically on the dorsal margin of the convex external surface, which may help in penetrating plant tissue and anchoring the mouthparts. The externally smooth maxillary stylets interlock to form a larger food canal and a smaller salivary canal. The structure and function of the mouthparts are adapted for the phytophagous feeding habit in this species. Similarities and differences between the mouthparts of E. fullo and those of other Heteroptera are discussed.

Millipede assassin bugs are a diverse group of specialized millipede predators. However, the feeding behavior of Ectrichodiinae remains poorly known, especially how the mouthpart structures relate to various functions in feeding. In this study, fine morphology of the mouthparts and feeding performance of Haematoloecha nigrorufa (Stål, 1867) was observed and described in detail for the first time. The triangular labrum is divided by a conspicuous transverse membrane into a strongly sclerotized basilabrum and a less sclerotized distilabrum. Fifteen types of sensilla are distributed on the mouthparts. Each mandibular stylet has an expanded spatulate apex and about 150 approximately transverse ridges on the external middle side; these help in penetrating the ventral trunk area and the intersegmental membranes of millipede prey. The right maxilla is tapered. On the internal surface are a row dorsal short bristles near the apex and a row of ventral bristles preapically. A longitudinal row of long lamellate structures extend proximate for a considerable distance, lie entirely within the food canal, and bear several short spines and short bristles. There is no obvious difference between males and females in the distribution, number, and types of sensilla on mouthparts. The adult feeding process involves several steps, including searching and capturing prey, paralyzing prey, a resting phase, and a feeding phase. The evolution of the mouthpart morphology and the putative functional significance of their sensilla are discussed, providing insight into the structure and function of the mouthparts adapted for millipede feeding.