Methane can be stored by metal-organic frameworks (MOFs). However, there remain challenges in the implementation of MOFs for adsorbed natural gas (ANG) systems. These challenges include thermal management, storage capacity losses due to MOF packing and densification, and natural gas impurities. In this review, we discuss discoveries about how MOFs can be designed to address these three challenges. For example, Fe(bdp) (bdp2− = 1,4-benzenedipyrazolate) was discovered to have intrinsic thermal management and released 41% less heat than HKUST-1 (HKUST = Hong Kong University of Science and Technology) during adsorption. Monolithic HKUST-1 was discovered to have a working capacity 259 cm3 (STP) cm−3 (STP = standard temperature and pressure equivalent volume of methane per volume of the adsorbent material: T = 273.15 K, P = 101.325 kPa), which is a 50% improvement over any other previously reported experimental value and virtually matches the 2012 Department of Energy (Department of Energy = DOE) target of 263 cm3 (STP) cm−3 after successful packing and densification. In the case of natural gas impurities, higher hydrocarbons and other molecules may poison or block active sites in MOFs, resulting in up to a 50% reduction of the deliverable energy. This reduction can be mitigated by pore engineering.
Biodiesel is a promising candidate for sustainable and renewable energy and extensive research is being conducted worldwide to optimize its production process. The employed catalyst is an important parameter in biodiesel production. Metal–organic frameworks (MOFs), which are a set of highly porous materials comprising coordinated bonds between metals and organic ligands, have recently been proposed as catalysts. MOFs exhibit high tunability, possess high crystallinity and surface area, and their order can vary from the atomic to the microscale level. However, their catalytic sites are confined inside their porous structure, limiting their accessibility for biodiesel production. Modification of MOF structure by immobilizing enzymes or ionic liquids (ILs) could be a solution to this challenge and can lead to better performance and provide catalytic systems with higher activities. This review compiles the recent advances in catalytic transesterification for biodiesel production using enzymes or ILs. The available literature clearly indicates that MOFs are the most suitable immobilization supports, leading to higher biodiesel production without affecting the catalytic activity while increasing the catalyst stability and reusability in several cycles.
In this review, the evolution of paradigm shifts in CH4 adsorbent design are discussed. The criteria used as characteristic of paradigms are first reports, systematic findings, and reports of record CH4 storage or deliverable capacity. Various paradigms were used such as the systematic design of micropore affinity and pore size, functionalization, structure optimization, high throughput in silico screening, advanced material property design which includes flexibility, intrinsic heat management, mesoporosity and ultraporosity, and process condition optimization. Here, the literature is reviewed to elucidate how the approach to CH4 adsorbent design has progressed and provide strategies that could be implemented in the future.
Global emission of methane reached a record high in 2020. Furthermore, it is expected that methane emissions will continue to rise in the coming years despite the economic slowdown stemming from the coronavirus pandemic. Adsorbents can be used to reduce methane emissions. However, the question remains as to which adsorbents perform best for enhanced methane capture. In this work, it is demonstrated that metal-organic frameworks (MOFs) exhibited the best methane uptakes at 1 bar and 298 K from experiments as compared to tested carbonaceous materials, polymers, and zeolites. In addition, the adsorption entropy, an important thermodynamic property indicating adsorption capacity and kinetics, is determined on well-defined MOFs using a global predictive equation for porous materials. A correlation was used to describe the effect of translation and rotation of methane in the porous material for methane emission abatement. This information and the entropy of adsorption of methane on MOFs has not been reported before. The predicted results were compared to experimental data obtained from adsorption isotherms. Optimum isosteric heats were calculated by the Bhatia and Myers correlation. Finally, the pre-exponential factor of desorption is determined to aid in the design of materials for global methane emissions mitigation.