Xiao Zhang

Xiao Zhang


Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
7 February 2022 in IEEE Transactions on Industrial Informatics
Verified
Journal Article
Closed access
CCChunyu Chen
Chunyu Chen
YWYunpeng Wang
Yunpeng Wang
Mingjian CuiMingjian Cui
Mingjian Cui
JZJunbo Zhao
Junbo Zhao
WBWenjun Bi
Wenjun Bi
XZXiao Zhang
Xiao Zhang
Power system state estimation (PSSE) is the foundation of energy management system applications. Hence, operators impose stringent requirements on PSSE data integrity. False data injection attacks (FDIAs) can cause risks to PSSE data-driven operations and demand mitigation. In this article, we present a two-step FDIA detector design. In step one, we study a novel stealthy attack policy by simultaneously considering the attacker’s cost reduction and damage production. In step two, with the aid of a deep autoencoding Gaussian mixture model (DAGMM), we design an unsupervised detection scheme to detect the stealthy attack. The DAGMM-based detector can meet the requirement of rapidity, unsupervisedness, and data imbalance tolerance. Eventually, we simulate and validate the stealthy attack policy and the corresponding detector using the benchmark IEEE 39-bus and 118-bus systems.

9 March 2020 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
XZXiao Zhang
Xiao Zhang
XWXiang Wu
Xiang Wu
CGChengfei Geng
Chengfei Geng
XPXiuyuan Ping
Xiuyuan Ping
Shuo ChenShuo Chen
Shuo Chen
Hui ZhangHui Zhang
Hui Zhang
In this article, a common-mode voltage reduction pulsewidth modulation (CMV-R PWM) for three-level neutral point clamped inverter based on the simplification of the three-level space-vector diagram into that of a two-level inverter is studied. By replacing the switching sequence of two-level space-vector PWM with that of CMV-R PWM, the common-mode voltage of the proposed method can be restricted to one-sixth of the dc-link voltage. With the new switching sequences, the neutral-point voltage control by calculating an optimized injected zero-sequence voltage is introduced. Simulation and comparative analysis is given to illustrate the features of the proposed method. The effectiveness and correctness of the proposed method is verified by experiment.

16 April 2024 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
XWXiang Wu
Xiang Wu
CLChao Li
Chao Li
YZYuyang Zhang
Yuyang Zhang
Shuo ChenShuo Chen
Shuo Chen
ZMZhixun Ma
Zhixun Ma
GTGuojun Tan
Guojun Tan
A position sensorless control of interior permanent synchronous motor (IPMSM) equipped with LC sinusoidal filter based on the full-order sliding mode observer (FOSMO) and feedforward quadrature phase-locked loop (FQPLL) is proposed in this article. The FOSMO is designed to estimate stator currents, stator voltages, and extended back electromotive forces of IPMSM. To enhance the rapidity of the convergence and accuracy of the estimation of the FOSMO, an adaptive gain matrix is designed by adopting equivalent control theory and Lyapunov stability theory. In order to suppress the dc deviation in the position estimation error under acceleration or deceleration operations, a robust and anti-interference feedforward loop without differentiator and motor parameters is added to the conventional quadrature phase-locked loop. The parameter design method of the proposed FQPLL is studied by analysis of the frequency characteristics. The experimental results verify the effectiveness of the proposed strategy.

4 September 2024 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
XWXiang Wu
Xiang Wu
JLJia Li
Jia Li
Shuo ChenShuo Chen
Shuo Chen
ZMZhixun Ma
Zhixun Ma
Yaofei HanYaofei Han
Yaofei Han
XZXiao Zhang
Xiao Zhang
Finite-position-set phase-locked loop (FPS-PLL) is a research hotspot in the sensorless control of permanent magnet synchronous motor (PMSM) due to its excellent dynamic response and no parameters tuning, but it takes the high computational burden and may suffer from a rotor position error of 180°. To solve the above problems, a double-cost-function FPS-PLL (DCF-FPS-PLL) is proposed in this article, where two different cost functions are defined to decide the iteration direction and guarantee the convergence of the Newton iteration method. The estimation accuracy of the rotor position is theoretically 4.73e-6 rad for the DCF-FPS-PLL without considering the error caused by the observer while only three iterations are needed, which reduces the large amount of computation without sacrificing the accuracy. The experimental results verify the advantages of the DCF-FPS-PLL.

29 March 2019 in Energies
Verified
Journal Article
Open access
PDF file
Shuo ChenShuo Chen
Shuo Chen
XZXiao Zhang
Xiao Zhang
XWXiang Wu
Xiang Wu
GTGuojun Tan
Guojun Tan
XCXianchao Chen
Xianchao Chen
In traditional sensorless control of the interior permanent magnet synchronous motors (IPMSMs) for medium and high speed domains, a control strategy based on a sliding-mode observer (SMO) and phase-locked loop (PLL) is widely applied. A new strategy for IPMSM sensorless control based on an adaptive super-twisting sliding-mode observer and improved phase-locked loop is proposed in this paper. A super-twisting sliding-mode observer (STO) can eliminate the chattering problem without low-pass filters (LPFs), which is an effective method to obtain the estimated back electromotive forces (EMFs). However, the constant sliding-mode gains in STO may cause instability in the high speed domain and chattering in the low speed domain. The speed-related adaptive gains are proposed to achieve the accurate estimation of the observer in wide speed range and the corresponding stability is proved. When the speed of IPMSM is reversed, the traditional PLL will lose its accuracy, resulting in a position estimation error of 180°. The improved PLL based on a simple strategy for signal reconstruction of back EMF is proposed to ensure that the motor can realize the direction switching of speed stably. The proposed strategy is verified by experimental testing with a 60-kW IPMSM sensorless drive.

24 August 2021 in IEEE Transactions on Industrial Informatics
Verified
Journal Article
Closed access
YCYang Chen
Yang Chen
CCChunyu Chen
Chunyu Chen
XZXiao Zhang
Xiao Zhang
Mingjian CuiMingjian Cui
Mingjian Cui
FLFangxing Li
Fangxing Li
SYShengfei Yin
Shengfei Yin
Customer baseline load (CBL) reconstruction is a critical problem in residential demand response. The difficulty of residential CBL lies in the variability of both irregular consumption and on-site distributed energy resources. Targeting the CBL reconstruction of residential prosumers, a regression-based estimation scheme is proposed using stacked autoencoders (SAEs) under the federated learning (FL) framework. In the FL framework, each residential unit (RU) stores and trains data locally without sharing them with neighboring RUs or the independent third party (ITP) responsible for CBL reconstruction. Local updates containing no load information are exchanged with the ITP (server) for the training improvement. The FL framework can, thus, protect the privacy of customers. Experimental results show that the proposed FL-based cascaded SAE outperforms the baseline on all tests and achieves up to 62.5% improvement in reducing reconstruction error. Moreover, it has enhanced privacy-preserving knowledge-sharing ability, higher efficiency, and better stability.