A position sensorless control of interior permanent synchronous motor (IPMSM) equipped with LC sinusoidal filter based on the full-order sliding mode observer (FOSMO) and feedforward quadrature phase-locked loop (FQPLL) is proposed in this article. The FOSMO is designed to estimate stator currents, stator voltages, and extended back electromotive forces of IPMSM. To enhance the rapidity of the convergence and accuracy of the estimation of the FOSMO, an adaptive gain matrix is designed by adopting equivalent control theory and Lyapunov stability theory. In order to suppress the dc deviation in the position estimation error under acceleration or deceleration operations, a robust and anti-interference feedforward loop without differentiator and motor parameters is added to the conventional quadrature phase-locked loop. The parameter design method of the proposed FQPLL is studied by analysis of the frequency characteristics. The experimental results verify the effectiveness of the proposed strategy.
21 November 2025 in IEEE Journal of Emerging and Selected Topics in Power Electronics
In order to solve the problems of steady-state oscillation and difficult parameter design in the maximum torque per ampere (MTPA) control for the interior permanent magnet synchronous motor (IPMSM) based on conventional sliding mode extremum seeking control (SMESC), an improved sliding mode extremum seeking control without steady-state oscillation (SMESC-SSO) based MTPA method is proposed. The proposed method tracks the MTPA point in two stages. The first stage uses the SMESC for the convergence process, while the second stage employs the extremum seeking control without steady-state oscillation (ESC-SSO) for the steady-state process. The switching law between the two algorithms is also reasonably designed. The effectiveness of the proposed method is verified by both simulation and experiment.
1 November 2026 in IEEE Transactions on Power Electronics
The conventional active damping (AD) for permanent magnet synchronous motor (PMSM) with LC sinusoidal filter requires extra sensors to measure the variables such as the motor currents, capacitor currents, or capacitor voltages, which increase the system cost. In this paper, an inverter-current-feedback AD (ICFAD) based on a sliding-mode disturbance observer (SMDO) is studied. The established SMDO can accurately estimate the motor currents using only inverter-side current measurements, while simultaneously utilizing the sampled inverter-side currents for AD control. The gain matrix of the SMDO is derived according to Lyapunov stability theory. In order to obtain satisfactory resonance suppression effect, the impacts of the AD coefficient, LC sinusoidal filter parameters, and motor parameters on the resonance are analyzed through the Nyquist stability theory. Then, the parameter tuning method of the ICFAD based current controller with SMDO is studied by analyzing the frequency characteristics. The effectiveness of the proposed method is verified through experimental results.