This paper presents a flexible 2.45-GHz wireless power harvesting wristband that generates a net dc output from a -24.3-dBm RF input. This is the lowest reported system sensitivity for systems comprising a rectenna and impedance-matching power management. A complete system has been implemented comprising: a fabric antenna, a rectifier on rigid substrate, a contactless electrical connection between rigid and flexible subsystems, and power electronics impedance matching. Various fabric and flexible materials are electrically characterized at 2.45 GHz using the two-line and the T-resonator methods. Selected materials are used to design an all-textile antenna, which demonstrates a radiation efficiency above 62% on a phantom irrespective of location, and a stable radiation pattern. The rectifier, designed on a rigid substrate, shows a best-in-class efficiency of 33.6% at -20 dBm. A reliable, efficient, and wideband contactless connection between the fabric antenna and the rectifier is created using broadside-coupled microstrip lines, with an insertion loss below 1 dB from 1.8 to over 10 GHz. A self-powered boost converter with a quiescent current of 150 nA matches the rectenna output with a matching efficiency above 95%. The maximum end-to-end efficiency is 28.7% at -7 dBm. The wristband harvester demonstrates net positive energy harvesting from -24.3 dBm, a 7.3-dB improvement on the state of the art.

This letter introduces a new technique of inkjet printing antennas on textiles. A screen-printed interface layer was used to reduce the surface roughness of the polyester/cotton material that facilitated the printing of a continuous conducting surface. Conducting ink was used to create three inkjet-printed microstrip patch antennas. An efficiency of 53% was achieved for a fully flexible antenna with two layers of ink. Measurements of the antennas bent around a polystyrene cylinder indicated that a second layer of ink improved the robustness to bending.

Wearable devices are ideal for personalized electronic applications in several domains such as healthcare, entertainment, sports and military. Although wearable technology is a growing market, current wearable devices are predominantly battery powered accessory devices, whose form factors also preclude them from utilizing the large area of the human body for spatiotemporal sensing or energy harvesting from body movements. E-textiles provide an opportunity to expand on current wearables to enable such applications via the larger surface area offered by garments, but consumer devices have been few and far between because of the inherent challenges in replicating traditional manufacturing technologies (that have enabled these wearable accessories) on textiles. Also, the powering of e-textile devices with battery energy like in wearable accessories, has proven incompatible with textile requirements for flexibility and washing. Although current e-textile research has shown advances in materials, new processing techniques, and one-off e-textile prototype devices, the pathway to industry scale commercialization is still uncertain. This paper reports the progress on the current technologies enabling the fabrication of e-textile devices and their power supplies including textile-based energy harvesters, energy storage mechanisms, and wireless power transfer solutions. It identifies factors that limit the adoption of current reported fabrication processes and devices in the industry for mass-market commercialization.

This study presents an inkjet printed textile antenna realised using a novel fabrication methodology. Conventionally, it is very difficult to inkjet print onto textiles because of surface roughness. This study demonstrates how this can be overcome by developing an interface coated layer which bonds to a standard polyester cotton fabric, creating a smooth surface. A planar dipole antenna has been fabricated, simulated and measured. This study includes DC resistance, RF reflection coefficient results and antenna radiation patterns. Efficiencies of greater than 60% have been achieved with only one layer of conducting ink. The study demonstrates that the interface layer saves considerable time and cost in terms of the number of inkjet layers needed whilst also improving the printing resolution.

A novel use of spray-coating technique to fabricate organic solar cells on textiles for wearable energy harvesting applications.

A novel technique for inkjet printing frequency selective surfaces (FSSs) on textiles is introduced. The challenge of printing an inkjet layer of 3 µm thickness on polyester cotton with a surface roughness of the order of 150 µm is achieved with a screen‐printed interface layer. The conducting inkjet layer is then printed directly on top of the interface layer. A screen mask was used so that the interface layer was only printed directly below the conducting ink. A square FSS structure has been fabricated and the measured shielding has been compared to simulations.