In this paper, coating removal characteristics of water jet by micro jet flow affected by cleaning parameters is analyzed. Numerical simulation of fluid field calculates the velocity and pressure distribution of a water jet impinging on a rigid wall, which is used for design experiments of coating removal affected by jet pressure, traversal speed, and repeated impacting times. The removal width is used as a measure of water jet coating removal capability. Experiment results show that the coating removal width is constant, independent with traversal speed or repeated times when total exposure time of waterjet impingement is fixed. According to results of coating removal by a linear moving water jet, this study also analyzes characteristics of coating removal by rotating jet disc, especially residual coating affected by rotational and moving speed of the cleaning disc. The research is helpful to improve the coating removal efficiency of cleaning disc devices.

Due to the extremely high pressures in the deep sea, heavy ballast tanks and pressure compensating hydraulic tanks are typically required to support the operation of classic buoyancy controls. Buoyancy control systems driven by phase-change materials (PCM) have unique advantages over conventional hydraulically actuated buoyancy control systems, including high adaptability for deep-sea exploration and simple, lightweight, and compact structures. Inspired by this, a buoyancy control module (BCM) was designed with flexible material as the shell. Instead of a conventional mechanical system, the device uses an electric heating drive to control buoyancy by heating and cooling the PCM. Based on the principle of pressure compensation, this device can adjust the buoyancy of a small underwater vehicle in a deep-sea high-pressure environment. The BCM successfully adjusts the buoyancy to lift itself up and down in the South China Sea at a depth of 3223 m. The performance of the phase-change BCM to control buoyancy under high pressure is validated by systematic experiments and theoretical analysis. Our work proposes a flexible scheme for the design of a deep-sea phase-change-driven BCM and highlights its potential application in deep-sea micro-mechanical systems, especially soft robots.

Precision modeling of the hydraulic gear pump pressure dynamics depends on the accurate prediction of volumetric displacement in the inter-tooth spaces of the gear. By accurate reconstruction of the gear profile, detailed transient volumetric information can be determined. Therefore, this paper reports a non-contact gear measurement device using two opposing laser triangulation sensors, and the key geometrical models to reconstruct the profile with geometrical error compensation. An optimization-based key parameter calculation method is also proposed to find the unknown orientation of the sensor. Finally, an experimental setup is established, the performance of the device is tested and the geometric model is validated. Initial results showed that the method is able to reconstruct the target tooth profile and compensated results can reduce the geometrical error by up to 98% compared to the uncalibrated ones.

The deep-sea autonomous underwater vehicle (AUV) is equipment of vital importance for ocean exploration, monitoring, and surveying. With a variable buoyancy system (VBS), AUV can achieve rising, diving, and hovering in the water column. This paper proposes a deep-sea AUV with an oil bladder type hydraulic VBS, which controls the oil flow rate with a proportional valve. However, the implementation of accurate depth control for AUV faces various challenges due to the varying water density with depth, the non-linear feature of the hydraulic system, and the disturbance from sea flows and currents. To tackle these problems, a third-order linear active disturbance rejection controller (LADRC) and its fuzzy adaptive version were designed and implemented in MATLAB/Simulink based on the state-space function of the proposed AUV system. Compared with the conventional PID controller, the simulation results indicate that the proposed LADRC controller shows strong robustness to disturbance, with other advantages including smaller steady-state error, overshoot, settling time, and response time. Moreover, the proposed fuzzy LADRC controller could further decrease the overshoot caused by the increasing target distance. The results prove that the designed depth controllers can meet the control requirements of the proposed deep-sea AUV.

Preventing collision accidents between merchant ships and fishing vessels has long been a significant challenge for maritime safety in coastal waters. To quantitatively analyze the relationship between the risk factors contributing to these collisions, identify the key factors leading to such accidents, and develop effective prevention strategies, the N-K model was employed to examine the risk coupling mechanisms involved. The model was based on an analysis of 132 collision incidents between merchant ships and fishing vessels in China’s coastal waters from 2013 to 2023. The characteristics of these collision accidents were investigated, and the risk factors were categorized into four distinct types: human, management, environmental, and ship factors. The coupling of collision risk factors between merchant ships and fishing vessels was mainly considered from the perspective of the overall system, and the N-K model was used to calculate the probability and risk values associated with the coupling of these four risk factors. Modeling results indicated that the coupling value of four factors was 0.1083, which was 1.5 times greater than the maximum coupling value of three factors and 2.1 times greater than the maximum coupling value of two factors. The risk of collision accidents between merchant ships and fishing vessels increases gradually with an increase in the risk coupling factors. Among the four categories of factors, the risk coupling between the ship factors and environmental factors is associated with a relatively large probability of accidents. Appropriate countermeasures were proposed to implement effective preventive measures at the source of collision accidents.

Considering the further exploration of the ocean, the requirements for deep-sea operation equipment have increased. Many problems existing in the widely used deep-sea hydraulic system have become increasingly prominent. Compared with the traditional deep-sea hydraulic system, actuators using a paraffin phase change material (PCM) have incomparable advantages, including lightweight structure, low energy consumption, high adaptability to the deep sea, and good biocompatibility. Thus, a deep-sea drive microunit (DDM) based on paraffin PCM is proposed in this paper. The device adopts a flexible shell, adapting to the high-pressure environment of the deep-sea based on the principle of pressure compensation. The device realizes the output of displacement and force through the electrothermal drive, which can be used as actuator or power source of other underwater operation equipment. The microunit successfully completes the functional verification experiments in air, shallow water, and hydrostatic pressure of 110 MPa. In accordance with experimental results, a reasonable control curve is fitted, highlighting its potential application in deep-sea micro electro mechanical systems, especially in underwater soft robot.