The increasing use of nanosatellites as host platforms for increasingly data-intensive sensors such as hyperspectral imagers or video, drives a need for more power-efficient, higher-rate data downlink capability. CubeSats, the dominant standard for nanosatellites, have limited size, weight, and power, making it difficult to accommodate high gain radio-frequency (RF) antennas. This pushes most CubeSat missions with high data rate needs to use ground stations with large, high-gain apertures (dish diameters ranging from 5 to 20 m). There are also regulatory challenges in obtaining RF licenses with substantial bandwidth for CubeSat missions; even management of the many narrow-bandwidth license requests has become an issue. An alternative to traditional RF communications is desirable for CubeSats.
Micro-Electro-Mechanical Systems (MEMS) Deformable Mirrors (DMs) enable precise wavefront control for optical systems. This technology can be used to meet the extreme wavefront control requirements for high contrast imaging of exoplanets with coronagraph instruments. MEMS DM technology is being demonstrated and developed in preparation for future exoplanet high contrast imaging space telescopes, including the Wide Field Infrared Survey Telescope (WFIRST) mission which supported the development of a 2040 actuator MEMS DM. In this paper, we discuss ground testing results and several projects which demonstrate the operation of MEMS DMs in the space environment. The missions include the Planet Imaging Concept Testbed Using a Recoverable Experiment (PICTURE) sounding rocket (launched 2011), the Planet Imaging Coronagraphic Technology Using a Reconfigurable Experimental Base (PICTURE-B) sounding rocket (launched 2015), the Planetary Imaging Concept Testbed Using a Recoverable Experiment - Coronagraph (PICTURE-C) high altitude balloon (expected launch 2019), the High Contrast Imaging Balloon System (HiCIBaS) high altitude balloon (launched 2018), and the Deformable Mirror Demonstration Mission (DeMi) CubeSat mission (expected launch late 2019). We summarize results from the previously flown missions and objectives for the missions that are next on the pad. PICTURE had technical difficulties with the sounding rocket telemetry system. PICTURE-B demonstrated functionality at >100 km altitude after the payload experienced 12-g RMS (Vehicle Level 2) test and sounding rocket launch loads. The PICTURE-C balloon aims to demonstrate contrast using a vector vortex coronagraph, image plane wavefront sensor, and a 952 actuator MEMS DM. The HiClBaS flight experienced a DM cabling issue, but the 37-segment hexagonal piston-tip-tilt DM is operational post-flight. The DeMi mission aims to demonstrate wavefront control to a precision of less than 100 nm RMS in space with a 140 actuator MEMS DM.
1 April 2021 in Journal of Astronomical Telescopes, Instruments, and Systems
The Deformable Mirror Demonstration Mission (DeMi) payload is an optical instrument that is demonstrating the on-orbit performance of a 140-actuator Microelectromechanical Systems Deformable Mirror (MEMS DM) on a 6U () CubeSat.1–6 The key payload requirements are to measure individual DM actuator wavefront displacement contributions to a precision of 12 nm, measure low order optical aberrations to accuracy and precision, and correct both static and dynamic wavefront errors to RMS error. The DeMi mission will raise the Technology Readiness Level (TRL) of MEMS DM technology from a five to at least a seven for future space telescope applications7 (see the Appendix for a description of NASA TRLs). The DeMi CubeSat began in-space operations in July 2020.
We demonstrate silicon-based waveguide-integrated blue (405 nm) light photodetectors using alumina waveguides integrated into a silicon photonics platform for the first time. Responsivities above 0.25 A/W are achieved. A novel detector design minimizes back reflections from the waveguide-detector interface.
26 August 2021 in Frontiers in Astronomy and Space Sciences
The Deformable Mirror Demonstration Mission (DeMi) is a technology demonstration CubeSat to test a 140 actuator micro-electromechanical system (MEMS) deformable mirror in low-Earth orbit. Such mirrors can provide precise wavefront control with low size, weight, and power per actuator. Hence, they have the potential of improving contrast in coronagraphs on future space telescopes. In the DeMi payload, a Shack Hartmann lenslet array based wavefront sensor monitors the deformable mirror, illuminated by either an internal 636 nm laser diode or external starlight. This work describes the instrument design drivers and CubeSat implementation, and briefly illustrates operation on orbit by comparing ground-based measurements of a displaced actuator to an on-orbit measurement using the internal laser source. The 6U CubeSat was launched on February 25, 2020 and deployed from the International Space Station on July 13, 2020.
We present a mid-wave infrared photonic integrated circuit platform based on germanium-on-silicon waveguides – the first to include dielectric top cladding, which improves robustness and allows for the complicated metal routing needed for practical, large-scale photonic integrated circuits. We conduct the first comprehensive review of top cladding materials for germanium-on-silicon waveguides and find that Nb2O5 (loss: 3.5–4.6 dB/cm at 4.6 µm; ring resonator loaded Q >37,000 and unloaded Q >58,000) and epitaxial Si (loss: 4.1-6.3 dB/cm at 4.6 µm; ring resonator loaded Q >23,000 and unloaded Q >40,000) achieve the best results. For sensing applications, which can require waveguides exposed to the environment, we demonstrate state-of-the-art air-clad waveguides and ring resonators that achieve losses of 0.6–2.5 dB/cm for both TE and TM light and high-Q factors (loaded Q of >106,000 and unloaded Q >190,000 for TE light).