Power cycling test is one of the important tasks to investigate the reliability performance of power device modules in respect to temperature stress. From this, it is able to predict the lifetime of a component in power converters. In this paper, representative power cycling test circuits, measurement circuits of wear-out failure indicators as well as measurement strategies for different power cycling test circuits are discussed in order to provide the current state of knowledge of this topic by organizing and evaluating current literature. In the first section of this paper, the structure of a conventional power device module and its related wear-out failure mechanisms with degradation indicators are discussed. Then, representative power cycling test circuits are introduced. Furthermore, on-state collector–emitter voltage $(V_{{\rm{CE\_ON}}})$ and forward voltage $(V_{F})$ measurement circuits for wear-out condition monitoring of power device modules during power cycling test are presented. Finally, different junction temperature measurement strategies for monitoring of solder joint degradation are explained.
1 December 2016 in IEEE Transactions on Power Electronics
Power electronic systems have gradually gained an important status in a wide range of industrial applications such as renewable generation, motor drives, automotive and railway transportation. Accordingly, recent research makes an effort to improve the reliability of power electronic systems to comply with more stringent constraints on safety, cost and availability. The power devices are one of the most reliability-critical components in power electronic systems. Therefore, its condition monitoring plays an important role to improve the reliability of power electronic systems. This paper proposes a condition monitoring method of IGBT modules. In the first section of this paper, a structure of a conventional IGBT module and a related parameter for the condition monitoring are explained. Then, a proposed real-time on-state collector-emitter voltage measurement circuit and condition monitoring strategies under different operating conditions are described. Finally, experimental results confirm the feasibility and effectiveness of the proposed method.
17 January 2017 in IEEE Transactions on Power Electronics
In this paper, the effect of junction temperature swing duration on lifetime of transfer molded power insulated gate bipolar transistor (IGBT) modules is studied and a relevant lifetime factor is modeled. This study is based on 39 accelerated power cycling test results under six different conditions by an advanced power cycling test setup, which allows tested modules to be operated under more realistic electrical conditions during the power cycling test. The analysis of the test results and the temperature swing duration dependent lifetime factor under different definitions and confidence levels are presented. This study enables to include the t △T ⌋ effect on lifetime model of IGBT modules for its lifetime estimation and it may result in improved lifetime prediction of IGBT modules under given mission profiles of converters. A postfailure analysis of the tested IGBT modules is also performed.
13 September 2017 in IEEE Transactions on Industrial Electronics
In this paper, the lifetime prediction of power device modules based on the linear damage accumulation is studied in conjunction with simple mission profiles of converters. Superimposed power cycling conditions, which are called simple mission profiles in this paper, are made based on a lifetime model in respect to junction temperature swing duration. This model has been built based on 39 power cycling test results of 600-V 30-A three-phase-molded IGBT modules. Six tests are performed under three superimposed power cycling conditions using an advanced power cycling test setup. The experimental results validate the lifetime prediction of the IGBT modules based on the linear damage accumulation by comparing the test results with the predicted lifetime from the lifetime model. Furthermore, the test results show the importance of the junction temperature swing duration effect for the lifetime prediction of IGBT modules under power converter applications.
8 September 2017 in IEEE Transactions on Power Electronics
Wear-out condition monitoring of IGBT modules with failure mode separation gives some benefits. First, it allows proactive maintenance plans. Further, depending on the failure mode, different proactive control strategies can be applied to inverters in order to improve the reliability and availability of power electronic systems. This paper proposes a new method for the separation of two representative wear-out failure modes of wire-bonded IGBT modules in a grid-connected inverter in real time. The proposed method requires just two preliminary I- V characterizations of IGBT modules. Further, only one monitoring parameter is used, and thus, it is cost-effective compared with using one more monitoring parameter in order to separate failure modes. Experimental results verify the validity and feasibility of the proposed method.
26 January 2018 in IEEE Transactions on Power Electronics
Due to the continuous demands for highly reliable and cost-effective power conversion, quantified reliability performances of the power electronics converter are becoming emerging needs. The existing reliability predictions for the power electronics converter mainly focus on the metrics of lifetime, accumulated damage, constant failure rate, or mean time to failure. Nevertheless, the time-varying and probability-distributed characteristics of the reliability are rarely involved. Moreover, in the public literatures, there are few evidences showing that the accuracy of the predicted reliability was experimentally validated. In this paper, a more advanced metric “cumulative distribution function (CDF)” is introduced to predict the reliability performance of the power electronics system based on mission profiles in motor drive application. Furthermore, the accuracy of the predicted reliability metrics is verified through a series of wear-out tests in a converter testing system. It is concluded that the CDF is a very suitable metric to predict the reliability performance of the converter, and it has shown good accuracy with much more reliability information compared to the existing approaches. In this method, the correct stress translation and dedicated strength tests based on mission profiles are two key factors to ensure the efficiency and accuracy of reliability prediction.