1 December 2016 in IEEE Transactions on Power Electronics
Power electronic systems have gradually gained an important status in a wide range of industrial applications such as renewable generation, motor drives, automotive and railway transportation. Accordingly, recent research makes an effort to improve the reliability of power electronic systems to comply with more stringent constraints on safety, cost and availability. The power devices are one of the most reliability-critical components in power electronic systems. Therefore, its condition monitoring plays an important role to improve the reliability of power electronic systems. This paper proposes a condition monitoring method of IGBT modules. In the first section of this paper, a structure of a conventional IGBT module and a related parameter for the condition monitoring are explained. Then, a proposed real-time on-state collector-emitter voltage measurement circuit and condition monitoring strategies under different operating conditions are described. Finally, experimental results confirm the feasibility and effectiveness of the proposed method.
24 April 2023 in IEEE Transactions on Power Electronics
Recent developments within the field of medium voltage wide-bandgap semiconductor devices are drawing attention from both researchers and industries due to the demanding requirements for more efficient high-power energy conversion. The rapid development has entailed an increased awareness of the negative impact of the increased rate of change in voltage, d v /d t , and its derived issues caused by the inevitable parasitic capacitive couplings. This article is dedicated to present an overview of the parasitic capacitive couplings in high-power medium voltage power electronic converter systems, using an example reference system enabled by medium voltage SiC mosfet s. The definitions of capacitive couplings are presented and the impacts raised by parasitic capacitive couplings are reviewed. In addition, the similarities of different capacitive couplings introduced by components in practical medium voltage systems are presented and summarized. Lastly, the challenges and future work with respect to parasitic capacitive couplings in medium voltage power electronics converter systems are shared from the authors' perspective.
30 June 2022 in IEEE Transactions on Power Electronics
In high-power medium-voltage applications, inductors usually have multiple windings on a single core, due to the high inductance value and high current stress. The multiple coils are electronically connected in either series or parallel, with considerations of windings loss and cost. However, the differences in parasitic capacitance of inductors using parallel and series connections are not discussed. Therefore, this article reveals that in comparison to parallel connections for windings, utilizing series connection for winding can significantly reduce the parasitic capacitance in multiwindings inductors without sacrificing the power density and adding manufacturing complexities. Physics-based models of parasitic capacitance in inductors with round-cable and copper-foil windings are developed for theoretical analysis. According to the theoretical analysis, the equivalent capacitance contributed by the stored electric field energy between two layers can be halved at least. The theoretical analysis is also verified by FEM simulations. Six prototyped inductors are experimentally compared to validate the theory.
4 March 2019 in IEEE Transactions on Industrial Electronics
19 June 2017 in IEEE Transactions on Power Electronics
A Converter Monitoring Unit (CMU), which will enable condition monitoring of wind turbine converters is presented in this paper. Reducing the cost of corrective maintenance by means of condition monitoring is a way of lowering Operation & Maintenance (O&M) costs for wind turbine systems. The CMU must be able to detect a broad range of failure modes related to Insulated Gate Bipolar Transistor (IGBT) power modules and associated gate drives. IGBT collector-emitter on-state voltage (vceon) and current (ic) is sampled in the CMU and used for detection of emerging failures. A new method for compensation of unwanted inductive voltage drop in the vceon measurement path is presented, enabling retrofitting of CMUs in existing wind turbines. Finally, experimental results obtained on a prototype CMU are presented. Experimentally the vceon dependency to IGBT junction temperature and deterioration of gate drive voltage is investigated. The proposed method shows a good detectability of both thermally related degradations of the power module and detectability of deterioration of gate drive voltage. It is also expected that the proposed method will enable detectability of other failure mechanisms.
5 February 2025 in IEEE Transactions on Power Electronics
With the development of wide band-gap devices, Silicon Carbide (SiC) semiconductor devices in 10–15 kV voltage class offer potentials in medium-voltage (MV) systems. To ensure the reliable operation of these MV SiC devices, gate driver power supplies must meet specific requirements: MV isolation capability, low coupling capacitance, stable performance across fluctuating voltage potentials, and assembly convenience. This article proposes a customized gate driver power supply solution. The proposed core-series-coupling planar transformer meets the specified requirements and significantly reduces common-mode capacitance by series connection of core, while maintaining ease of manufacturing. In addition, the open-loop voltage regulator circuit model ensures precise output voltage by accounting for winding resistance and magnetizing inductance. This article presents an MV SiC gate driver that achieves a partial discharge inception voltage of 11.5 kV and the transformer exhibits a low coupling capacitance of 0.42 pF. Additionally, this article conducts a 6 kV/30 A double pulse test, demonstrating the robust performance of the gate driver even at switching speeds of 133.9 V/ns during turn-off and 111.6 V/ns during turn-on transients.