With 6.5 billion smartphones in use worldwide, each relying on a battery for key subsystems like display, compute, and cellular connectivity, previous studies on power consumption often used invalidated indirect estimates that failed to isolate specific hardware usage. We address this by utilizing Google's On Device Power Rails Monitor (ODPM) tool for precise power measurements of individual components. Our findings indicate that connectivity (Wi-Fi, 4G/5G) and screen display are the primary power consumers, as shown with the Google Pixel 7A. We also confirmed similar power consumption trends using an energy estimation method on the Samsung S23+. Given the prevalence of smartphones, we discuss the challenges and opportunities for optimizing power usage.
Jamming attacks pose a serious threat to the normal functioning of cellular networks, disrupting communication services and compromising emergency situations. This paper introduces BeamArmor, a practical real-time application to monitor and mitigate jamming attacks in cellular networks. Hosted on a custom RAN controller utilizing the open-source srsRAN stack, it mitigates jamming by deploying beam-nulling techniques with MIMO antennas. This ensures reduced interference impact on desired communication signals. The system ensures real-time operation of the RAN stack by efficiently managing computational resources, meeting the time requirements of the cellular network's physical layer functionalities, and seamlessly integrating with srsRAN. The BeamArmor App is evaluated with over-the-air experiments that demonstrate over 10 dB of SNR improvement in real-time by suppressing the jamming signal through beam-nulling using only two antennas. Our broader vision includes expanding the BeamArmor platform to other real-time MIMO applications, such as advanced beamforming and localization techniques, and integrating it into O-RAN standards.
Millimeter-wave (mmWave) communications are crucial for unlocking the potential of future communication systems. Phased arrays play a vital role in generating directional beams, mitigating the high path-loss associated with these frequencies. Consequently, implementing beamforming within the radio is necessary to serve users in various directions. Applications such as AR/VR and vehicular communications demand rapid beam direction changes, typically within microseconds, to maintain stable connections when the user is mobile. In this demonstration, we showcase a mmWave setup capable of switching beams at microsecond intervals, along with a compact and portable user equipment setup for conducting experiments with high user mobility.
The adoption of MIMO technology in wireless networks enhances spectral efficiency and enables novel functionalities such as wireless sensing and localization. These functionalities can be enabled by Open-RAN architecture to provide high computation, memory, and data-driven inference through a RAN Intelligent Controller (RIC). However, existing RICs focus mainly on higher network layers and lack essential PHY layer functionalities for MIMO. We present MIMO-RIC, an open-source RAN intelligent controller tailored for MIMO applications. We enable the streaming of extensive 3D wireless channel measurements across antennas, subcarriers, and time, from RAN to MIMO-RIC to develop various MIMO apps like beamforming and localization. We implemented MIMO-RIC on the srsRAN open-source platform using ZeroMQ messaging system for efficient, low-latency communication. Our over-the-air experiment setup consisting of USRP radios and commercial user equipment demonstrates effective jammer monitoring, nulling, and user localization applications.
Millimeter-wave (mmWave) technology is pivotal for next-generation wireless networks, enabling high-data-rate and low-latency applications such as autonomous vehicles and XR streaming. However, maintaining directional mmWave links in dynamic mobile environments is challenging due to mobility-induced disruptions and blockage. While effective, the current 5G NR beam training methods incur significant overhead and scalability issues in multi-user scenarios. To address this, we introduce CommRad, a sensing-driven solution incorporating a radar sensor at the base station to track mobile users and maintain directional beams even under blockages. While radar provides high-resolution object tracking, it suffers from a fundamental challenge of lack of context, i.e., it cannot discern which objects in the environment represent active users, reflectors, or blockers. To obtain this contextual awareness, CommRad unites wireless sensing capabilities of bi-static radio communication with the mono-static radar sensor, allowing radios to provide initial context to radar sensors. Subsequently, the radar aids in user tracking and sustains mobile links even in obstructed scenarios, resulting in robust and high-throughput directional connections for all mobile users at all times. We evaluate this collaborative radar-radio framework using a 28 GHz mmWave testbed integrated with a radar sensor in various indoor and outdoor scenarios, demonstrating a 2.5x improvement in median throughput and an 8x improvement in 20th percentile throughput compared to a non-collaborative baseline.
The next generation of cellular networks, driven by applications like large-scale autonomy, extended reality, and IoT-based control, demands high network performance in terms of throughput, latency, and jitter, along with quick network adaptability. Developing these applications and corresponding network algorithms on commercial radio access networks (RAN) or through large-scale frameworks such as [1, 2] is often prohibitively expensive and time-consuming. Currently, the norm is to use simpler, simulated environments for initial testing, followed by real-world network evaluations. This approach simplifies testing but may not accurately capture the cellular network's complexities that can significantly impact application performance. Can we optimize both?