During drilling in deep shale gas reservoirs, drilling fluid losses, hole wall collapses, and additional problems occur frequently due to the development of natural fractures in the shale formation, resulting in a high number of engineering accidents such as drilling fluid leaks, sticking, mud packings, and buried drilling tools. Moreover, the horizontal section of horizontal well is long (about 1500 m), and the problems of friction, rock carrying, and reservoir pollution are extremely prominent. The performance of drilling fluids directly affects drilling efficiency, the rate of engineering accidents, and the reservoir protection effect. In order to overcome the problems of high filtration in deep shale formations, collapse of borehole walls, sticking of pipes, mud inclusions, etc., optimization studies of water-based drilling fluid systems have been conducted with the primary purpose of controlling the rheology and water loss of drilling fluid. The experimental evaluation of the adsorption characteristics of “KCl + polyamine” anti-collapse inhibitor on the surface of clay particles and its influence on the morphology of bentonite was carried out, and the mechanism of inhibiting clay mineral hydration expansion was discussed. The idea of controlling the rheology and water loss of drilling fluid with high temperature resistant modified starch and strengthening the inhibition performance of drilling fluid with “KCl + polyamine” was put forward, and a high temperature-resistant modified starch polyamine anti-sloughing drilling fluid system with stable performance and strong plugging and strong inhibition was optimized. The temperature resistance of the optimized water-based drilling fluid system can reach 180 °C. Applied to on-site drilling of deep shale gas horizontal wells, it effectively reduces the rate of complex accidents such as sticking, mud bagging, and reaming that occur when resistance is encountered during shale formation drilling. The time for a single well to trip when encountering resistance decreases from 2–3 d in the early stages to 3–10 h. The re-use rate of the second spudded slurry is 100 percent, significantly reducing the rate of complex drilling accidents and saving drilling costs. It firmly supports the optimal and rapid construction of deep shale gas horizontal wells.

The reservoir in the Anyue gas field, located in the Sichuan basin of China, belongs to the second member of the Dengying formation and has distinctive geological features. It is characterized by strong heterogeneity, low porosity, low permeability, and locally developed natural fractures. The reservoir space consists primarily of corrosion holes, natural fractures, and similar voids. Moreover, the lower reservoir exhibits high water saturation and a homogeneous bottom-water interface. Since it is a carbonate-based hydrocarbon reservoir with low porosity and permeability, deep acid fracturing has proven to be an efficient method for enhancing individual well production. However, the reconstruction of the second member of the Dengying formation reservoir poses significant challenges. The reservoir contains high-angle natural fractures, small vertical stress differences, and is located in close proximity to the gas–water interface. As a result, it becomes difficult to control the height of the acid break. Improper acid break treatment may easily result in water production affecting gas well production. To explore ways to control the longitudinal extension of acid fractures, 3D numerical models focusing on the initiation and expansion of acid fractures have been developed. This model takes into account geological and engineering factors such as stress differences, acid fracture displacements and scales, and their effects on the longitudinal extension of acid fractures. It was revealed that the pressure difference is the main controlling factor for the acid fracture height, followed by the reservoir thickness, the interlayer thickness, and the viscosity of the working fluid. Technical countermeasures for controlled fracture and high-acid fracturing tailored to different reservoir characteristics have been proposed, and design parameters for controlled fracture and high-acid fracturing can be optimized. By effectively controlling the vertical extension of the acid fracture, it is possible to maximize production from a single well while avoiding interference from the lower water layer. This study provides theoretical guidance for the application of deep-acid-fracturing techniques in low-permeability bottom-water gas reservoirs.

The limestone reservoir of the Da’anzhai section is the main production layer of Jurassic tight oil in central Sichuan, with tight and strongly heterogeneous reservoir rocks. In the early stages, small-scale plug removal and acidification techniques were mainly applied to the dacite section of the reservoir. However, using a single conversion method was not suitable for tight reservoirs with underdeveloped fractures. To address this challenge, we conducted large-scale real-world triaxial simulation test system experiments on hydraulic fracture propagation using samples from dense limestone outcrops. The aim was to elucidate the laws of hydraulic fracture propagation in dense limestone oil reservoirs. The L1 well in this area was selected to test the volumetric fracturing technology in order to achieve a breakthrough in test production and the reconstruction technology of the Da’anzhai section of the tight limestone reservoir. The experiments have shown that low stress differences, natural fracture development, and low viscosity slippery water are favorable factors for obtaining complex fracture morphology. In contrast to the construction parameters, the structural properties of the rock are the dominant factors in the formation of complex fracture morphologies. By optimizing the geological dessert and implementing targeted technological measures, bulk fracturing has been proven to be feasible for the dense limestone reservoir in the Da’anzhai section.

Foam acidization has unique advantages such as low damage, low filtration, low friction, high efficiency, excellent retardation, and fast liquid discharge rate, which is suitable for stimulation and reconstruction of low-pressure oil and gas reservoirs that have been developed over many years. It is obtained that the main chemical components of downhole plugging materials include vegetable oil, fatty acids and their esters, silicone oil, amide polymers, and additional organic components, as well as non-organic components, elemental sulfur, ferrous sulfide, iron disulfide, silicon dioxide, mineral salts, etc. The performance of foam acid was investigated by experiments, including the effective range of action of active acids, reducing filtration, increasing temperature resistance and high-temperature stability of foam acid deep wells. The new foam acid system is developed and optimized to suitable for low-pressure deep well acidification operations. Experimental evaluation optimized the acid foaming agent and foam stabilizer and developed a new foam acid formulation with foam stability, filter loss reduction, temperature resistance, and easy backflow performance. The experimental condition is that the temperature is 90 °C, the foam quality can reach more than 70% when mixed for more than 30 s, the average half-life is 38.75 min, and the liquid separation rate is 19.90 s/mL. Its suspension is better than that of conventional hydrochloric acid, its corrosion rate is 1.872 g/m²·h, and the flowback rate of foam acid residue reaches 97%. Experimental evaluation has shown that the developed foam acid features high surface activity, stable foam, strong temperature resistance, significant speed and corrosion suppression, and excellent drainage assist performance. Dynamical simulation evaluation of reservoir core foam acidification demonstrated that the foam features long-life, strong suspension capacity, excellent rheology, low filtration, and significant acidization and plug removal effects, and can be used in stimulating the medium-deep, high-temperature, and low-pressure oil and gas reservoirs.

Problems such as well loss and collapses in deep shale gas drilling are most often due to the development of cracks in the shale formation, resulting in significant leaks of drilling fluid, the sticking and burrowing of drilling tools, and other engineering accidents. In addition, the horizontal sections of wells are very long and issues of friction, rock transport, and formation contamination loom large. As a result, the performance of drilling fluids directly affects drilling efficiency, engineering accident rates, and reservoir protection effects. We first analyze the mechanisms of each emulsifier in an oil-based drilling fluid formulation and the filtration reduction mechanisms, taking into account the collapse-prone and abnormally high-pressure characteristics of shale formations. We undertake an experimental evaluation and optimization of polymeric surfactants, such as primary and secondary emulsions for high-performance oil-based drilling fluids. The design of rigid and deformable nano-micron plugging materials with a reasonable particle size range was achieved, and we obtained a low Oil—Water ratio and high-density oil-based drilling fluid system, with temperature resistance of 200 °C, an Oil—Water ratio as low as 70:30, compressive fracturing fluid pollution of 10%, and a maximum density of 2.6 g/cm³. The reuse rate reached 100%. The developed oil-based drilling fluid system with strong plugging, a high density, and a low Oil—Water ratio suitable for deep shale gas can effectively seal the well wall, reduce liquid invasion, prevent the wall from collapsing, reduce mud leakage, reduce the consumption of oil-based drilling fluid, improve the utilization rate of old mud, and reduce drilling costs.