Yang Wang

Mr. Yang Wang

Engineering Technology Research Institute of Southwest Oil & Gas Field Company, PetroChina, Chengdu, Sichuan, China
orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
18 October 2021 in ACS Omega
Verified
Journal Article
Open access
YWYang Wang
Yang Wang
YFYu Fan
Yu Fan
CZChanglin Zhou
Changlin Zhou
ZLZhifeng Luo
Zhifeng Luo
WCWeihua Chen
Weihua Chen
YFYan Fu
Yan Fu
The ultradeep carbonate reservoir in Sichuan Basin is characterized by deep burial depth, high temperature, and strong heterogeneity. In the early stage of production, the vertical well acid fracturing is the main reservoir stimulation method, and the horizontal well stimulation technology is not mature enough to release the production capacity of gas wells. Segmented acid fracturing of the ultradeep horizontal wells currently faces the following problems: the strong heterogeneity of reservoir leads to the difficulty of fine segmentation; the high reservoir temperature requires higher performance of working fluid; the reaction rate between acid and rock is fast and the action distance of acid is short, and there is low fracture conductivity under high closure stress. In view of the above problems, the fine segmented design method was studied, and the high-temperature-resistant authigenic acid and gelling acid systems were developed. The viscosity of authigenic acid is greater than 150 mPa s after shearing at 160 °C and 170 s–1 for 50 min, and the highest acid generation concentration is 4.05 mol/L. The gelling acid system has both the properties of high-temperature resistance and low friction resistance; not only canit meet the requirements of the retarding rate and the corrosion inhibition ability when the reservoir temperature is 160 °C but also the resistance reduction rate is up to more than 70%. By alternating injection of authigenic acid and gelling acid, the acid-etched fracture length and conductivity were, respectively, increased by 80% and 45%. The application of this technology in the horizontal well of the ultradeep carbonate reservoir in Sichuan Basin can increase the productivity by 3 times when compared with the vertical well acid fracturing, and a better stimulation effect has been achieved.

15 April 2024 in Processes
Verified
Journal Article
Open access
PDF file
SLSong Li
Song Li
YFYu Fan
Yu Fan
WDWengang Ding
Wengang Ding
YWYang Wang
Yang Wang
THTingting He
Tingting He
XZXi Zhang
Xi Zhang
The reservoir in the Anyue gas field, located in the Sichuan basin of China, belongs to the second member of the Dengying formation and has distinctive geological features. It is characterized by strong heterogeneity, low porosity, low permeability, and locally developed natural fractures. The reservoir space consists primarily of corrosion holes, natural fractures, and similar voids. Moreover, the lower reservoir exhibits high water saturation and a homogeneous bottom-water interface. Since it is a carbonate-based hydrocarbon reservoir with low porosity and permeability, deep acid fracturing has proven to be an efficient method for enhancing individual well production. However, the reconstruction of the second member of the Dengying formation reservoir poses significant challenges. The reservoir contains high-angle natural fractures, small vertical stress differences, and is located in close proximity to the gas–water interface. As a result, it becomes difficult to control the height of the acid break. Improper acid break treatment may easily result in water production affecting gas well production. To explore ways to control the longitudinal extension of acid fractures, 3D numerical models focusing on the initiation and expansion of acid fractures have been developed. This model takes into account geological and engineering factors such as stress differences, acid fracture displacements and scales, and their effects on the longitudinal extension of acid fractures. It was revealed that the pressure difference is the main controlling factor for the acid fracture height, followed by the reservoir thickness, the interlayer thickness, and the viscosity of the working fluid. Technical countermeasures for controlled fracture and high-acid fracturing tailored to different reservoir characteristics have been proposed, and design parameters for controlled fracture and high-acid fracturing can be optimized. By effectively controlling the vertical extension of the acid fracture, it is possible to maximize production from a single well while avoiding interference from the lower water layer. This study provides theoretical guidance for the application of deep-acid-fracturing techniques in low-permeability bottom-water gas reservoirs.

12 August 2020 in ACS Omega
Verified
Journal Article
Closed access
YWYang Wang
Yang Wang
CZChanglin Zhou
Changlin Zhou
XYXiangyi Yi
Xiangyi Yi
LLLi Li
Li Li
JZJun Zhou
Jun Zhou
YGYuan Gao
Yuan Gao

21 July 2022 in Energy Reports
Verified
Journal Article
Open access
YWYang Wang
Yang Wang
JYJian Yang
Jian Yang
TWTianyu Wang
Tianyu Wang
QHQiuyun Hu
Qiuyun Hu
ZLZefei Lv
Zefei Lv
THTingting He
Tingting He

21 September 2020 in ACS Omega
Verified
Journal Article
Closed access
YWYang Wang
Yang Wang
CZChanglin Zhou
Changlin Zhou
XYXiangyi Yi
Xiangyi Yi
LLLi Li
Li Li
WCWeihua Chen
Weihua Chen
XHXu Han
Xu Han

22 May 2023 in Frontiers in Physics
Verified
Journal Article
Open access
YWYang Wang
Yang Wang
ZLZefei Lv
Zefei Lv
Unconventional reservoirs have strong heterogeneity, with significant differences in the distribution of porosity and permeability. Fracturing is an important technology for increasing natural gas production in unconventional oil and gas reservoirs. For unconventional reservoirs with high temperature and low permeability, the rapid increase in acid rock reaction rate leads to a significant decrease in the effective distance of acidic fluids and fracture conductivity, especially the inability to obtain effective support at the fracture tip, which restricts the increase in production of high-temperature unconventional oil and gas reservoirs. To address the above issues, a composite fracturing method is proposed, which first uses a proppant to support the crack tip, and then uses gelled acid to corrode the middle and rear parts of the crack. According to the fracture conductivity achievement test experiment and proppant migration experiment, when 40/70 mesh ceramsite and 100 mesh ceramsite are mixed at a mass ratio of 1:4, the fracture conductivity can reach 21.8 μm·cm2 under the effective closing pressure of 60 MPa, which is 123% higher than the fracture conductivity of cementitious acid corrosion. The gel is used to carry 40/70 mesh and 100 mesh ceramsite, and the Equilibrium level of the sand embankment can reach 38 cm. At the same time, the sand dike formed by different particle sizes of ceramic particles is smoother than the sand vein formed by a single particle size of proppant, and the migration ability of ceramic particles to the fracture tip is better. The composite stimulation technology has been applied to 9 wells in carbonate and shale oil and gas reservoirs. After fracturing, the production of oil and gas wells is 210% higher than that of gelled acid fracturing, and the composite stimulation technology has achieved good stimulation effects.