The aim of this study is to detect ventilation corridors in three epochs (1992, 2002 and 2011) by mapping rough urban areas. The roughness parameters calculations are based on a 3D building database obtained from satellite imagery (SPOT) for thee epochs and are conducted accordingly to morphometric methods. Several ventilation paths are clearly recognisable for all three decades and based on the proximity analysis and roughness parameters (by calculating roughness length (z0) and zero-plane displacement height (zd)), we established their extent and analysed the structural and developmental changes. We conducted that changes occurred more rapidly in the second period – almost 90% of the study area was gradually built up, what obstructs the air flow. In addition, winds are blocked in the western part of the city – where the best wind conditions occur. The results urge to re-evaluate the current shape of ventilation corridors and suggest some new areas that should be included in the air ventilation system to improve citizens’ comfort and urban climate.
This research is related to the exploitation of multispectral imagery from an unmanned aerial vehicle (UAV) in the assessment of damage to rapeseed after winter. Such damage is one of a few cases for which reimbursement may be claimed in agricultural insurance. Since direct measurements are difficult in such a case, mainly because of large, unreachable areas, it is therefore important to be able to use remote sensing in the assessment of the plant surface affected by frost damage. In this experiment, UAV images were taken using a Sequoia multispectral camera that collected data in four spectral bands: green, red, red-edge, and near-infrared. Data were acquired from three altitudes above the ground, which resulted in different ground sampling distances. Within several tests, various vegetation indices, calculated based on four spectral bands, were used in the experiment (normalized difference vegetation index (NDVI), normalized difference vegetation index—red edge (NDVI_RE), optimized soil adjusted vegetation index (OSAVI), optimized soil adjusted vegetation index—red edge (OSAVI_RE), soil adjusted vegetation index (SAVI), soil adjusted vegetation index—red edge (SAVI_RE)). As a result, selected vegetation indices were provided to classify the areas which qualified for reimbursement due to frost damage. The negative influence of visible technical roads was proved and eliminated using OBIA (object-based image analysis) to select and remove roads from classified images selected for classification. Detection of damaged areas was performed using three different approaches, one object-based and two pixel-based. Different ground sampling distances and different vegetation indices were tested within the experiment, which demonstrated the possibility of using the modern low-altitude photogrammetry of a UAV platform with a multispectral sensor in applications related to agriculture. Within the tests performed, it was shown that detection using UAV-based multispectral data can be a successful alternative for direct measurements in a field to estimate the area of winterkill damage. The best results were achieved in the study of damage detection using OSAVI and NDVI and images with ground sampling distance (GSD) = 10 cm, with an overall classification accuracy of 95% and a F1-score value of 0.87. Other results of approaches with different flight settings and vegetation indices were also promising.
Open areas, along with their non-forest vegetation, are often threatened by secondary succession, which causes deterioration of biodiversity and the habitat’s conservation status. The knowledge about characteristics and dynamics of the secondary succession process is very important in the context of management and proper planning of active protection of the Natura 2000 habitats. This paper presents research on the evaluation of the possibility of using selected methods of textural analysis to determine the spatial extent of trees and shrubs based on archival aerial photographs, and consequently on the investigation of the secondary succession process. The research was carried out on imagery from six different dates, from 1971 to 2015. The images differed from each other in spectral resolution (panchromatic, in natural colors, color infrared), in original spatial resolution, as well as in radiometric quality. Two methods of textural analysis were chosen for the analysis: Gray level co-occurrence matrix (GLCM) and granulometric analysis, in a number of variants, depending on the selected parameters of these transformations. The choice of methods has been challenged by their reliability and ease of implementation in practice. The accuracy assessment was carried out using the results of visual photo interpretation of orthophotomaps from particular years as reference data. As a result of the conducted analyses, significant efficacy of the analyzed methods has been proved, with granulometric analysis as the method of generally better suitability and greater stability. The obtained results show the impact of individual image features on the classification efficiency. They also show greater stability and reliability of texture analysis based on granulometric/morphological operations.
The COVID-19 pandemic is a global challenge, and the key to tackling it is vaccinating a specified percentage of the population to acquire herd immunity. The observed problems with the efficiency of the vaccination campaigns in numerous countries around the world, as well as the approach used at the initial stage of the National Immunization Program in Poland, prompted us to analyse the possibility of using GIS technology to optimize the distribution of vaccines to vaccination sites so as to minimize the period needed to vaccinate individual population groups. The research work was carried out on the example of Warsaw, the capital of Poland and the city with the largest population in the country. The analyses were carried out for the 60–70 and 50–60 age groups, in various approaches and for vaccines of different companies (Moderna, BioNTech, AstraZeneca), used to vaccinate people in Poland. The proposed approach to optimize vaccine distribution uses Thiessen’s tessellation to obtain information on the number of people in a given population group living in the area of each vaccination site, and then to estimate the time needed to vaccinate that group. Compared to the originally used vaccination scenario with limited availability of vaccines, the proposed approach allows practitioners to design fast and efficient distribution scenarios. With the developed methodology, we demonstrated ways to achieve uniform vaccination coverage throughout the city. We anticipate that the proposed approach can be easily automated and broadly applied to various urban settings.
9 December 2024 in IEEE Geoscience and Remote Sensing Magazine
The significant increase in the amount of satellite data in recent years along with the increase in computing resources has opened up new possibilities for Earth Observation (EO) data analysis. However, the main obstacle to obtaining highquality products is the limited amount of labeled data. Among the methods that can help solve this type of problem, transfer learning (TL) has gained enormous interest in recent years. It involves using a model trained on one problem to solve another problem. This article reviews TL methods as applied to EO data analyses. It provides a structured overview of methods in relation to applications, publication statistics, and summarizes the advantages and disadvantages noted of previous research.
The process of secondary succession is one of the most significant threats to non-forest (natural and semi-natural open) Natura 2000 habitats in Poland; shrub and tree encroachment taking place on abandoned, low productive agricultural areas, historically used as pastures or meadows, leads to changes to the composition of species and biodiversity loss, and results in landscape transformations. There is a perceived need to create a methodology for the monitoring of vegetation succession by airborne remote sensing, both from quantitative (area, volume) and qualitative (plant species) perspectives. This is likely to become a very important issue for the effective protection of natural and semi-natural habitats and to advance conservation planning. A key variable to be established when implementing a qualitative approach is the remote sensing data acquisition date, which determines the developmental stage of trees and shrubs forming the succession process. It is essential to choose the optimal date on which the spectral and geometrical characteristics of the species are as different from each other as possible. As part of the research presented here, we compare classifications based on remote sensing data acquired during three different parts of the growing season (spring, summer and autumn) for five study areas. The remote sensing data used include high-resolution hyperspectral imagery and LiDAR (Light Detection and Ranging) data acquired simultaneously from a common aerial platform. Classifications are done using the random forest algorithm, and the set of features to be classified is determined by a recursive feature elimination procedure. The results show that the time of remote sensing data acquisition influences the possibility of differentiating succession species. This was demonstrated by significant differences in the spatial extent of species, which ranged from 33.2% to 56.2% when comparing pairs of maps, and differences in classification accuracies, which when expressed in values of Cohen’s Kappa reached ~0.2. For most of the analysed species, the spring and autumn dates turned out to be slightly more favourable than the summer one. However, the final recommendation for the data acquisition time should take into consideration the phenological cycle of deciduous species present within the research area and the abiotic conditions.