We demonstrate that coupling between grating diffraction and localized surface plasmons in two-dimensional gold nanoparticle arrays in water leads to narrow near-infrared resonance peaks in measured far field extinction spectra. Good agreement is obtained between finite difference time domain (FDTD) calculations and experimental extinction spectra. The FDTD calculations predict that the gold nanoparticle arrays exhibit near-field electric field intensity (E2) enhancements approximately one order of magnitude greater than those of single isolated gold nanoparticles.
The dispersion relations of the surface plasmon modes of metal nanoparticle chains are measured, and compared with theory. The theoretical model includes the effects of retardation, radiative damping and dynamic depolarization due to the finite size of the nanoparticles. The results reveal that, in addition to one longitudinal and one transverse mode, there is a third mode, which has not been previously reported.
We describe a means for improving the coupling of illumination to, and the collection of scattered radiation from, an optical antenna. This is achieved by integrating optical antennas with concentric ring gratings. Electromagnetic simulations demonstrate that the ring grating improves the coupling to the antenna, even if the incident illumination is focused by an aplanatic lens such as a microscope objective. Dipole radiation from the center of the structure is well collimated. Various aspects of field enhancement and dipole radiation behavior are analyzed. We propose this device for Raman scattering enhancement.
Optical fiber microresonators have attracted considerable interest for acoustic detection because of their compact size and high optical quality. Here, we have proposed, designed, and fabricated a spring-based Fabry–Pérot cavity microresonator for highly sensitive acoustic detection. We observed two resonator vibration modes: one relating to the spring vibration state and the other determined by the point-clamped circular plate vibration mode. We found that the vibration modes can be coupled and optimized by changing the structure size. The proposed resonator is directly 3D printed on an optical fiber tip through two-photon polymerization and is used for acoustic detection and imaging. The experiments show that the device exhibits a high sensitivity and low noise equivalent acoustic signal level of 2.39 mPa/Hz1/2 at 75 kHz that can detect weak acoustic waves, which can be used for underwater object imaging. The results demonstrate that the proposed work has great potential in acoustic detection and biomedical imaging applications.
Surface plasmon resonance (SPR) devices on single-mode optical fiber (SMF) end facets are desired for label-free biosensing, due to flexible light delivery, in vivo inspection capability, and seamless integration with fiber-optic communication techniques. We report a plasmonic crystal cavity structure that has a steep resonance near the plasmonic bandedge, a fabrication process to efficiently transfer and align the structure onto a bare SMF end facet, and characterization of its sensing performance. With a sensitivity of 571 nm RIU−1, a figure of merit of 68 RIU−1 and a real-time refractive index detection limit of 3.5 × 10−6 RIU, our sensors can be readily applied in common SPR biosensing experiments. They are over an order of magnitude more sensitive than reported modified-end multimode fiber SPR devices, while there are no reports on previous SMF end facet devices' detection limits which have very low figures of merit.
A method for fabricating optical antennas on atomic force microscope probes using focused ion beam modification is described. We numerically demonstrate that these optical antenna probes provide a large near field intensity enhancement when illuminated at their resonant wavelengths. We experimentally measure the plasmon resonant wavelengths of probes with various lengths. Both simulation and experiment indicate that the resonant wavelength redshifts with increasing antenna length. We anticipate that the optical antenna tips could be used for mapping the field distributions of nanophotonic devices or for high spatial resolution spectroscopy.