Indoor positioning technology has become undisputedly pervasive in modern society. It can be used for numerous applications in various environments, ranging from agriculture to smart industry. Among the different indoor positioning technologies, the development of the indoor visible light positioning (VLP) system has gained momentum recently thanks to its low cost and centimetre-order accuracy. Moreover, VLP is a promising candidate technology for integration with Light Fidelity (Li-Fi), which relies on the optical spectrum to build future wireless networks and plays a significant role in sixth-generation (6G) wireless networks. This tutorial investigates VLP as a novel positioning technology in depth. The inherent characteristics and fundamentals of this technology are extensively described with the components of a VLP system and possible localization approaches being discussed. Furthermore, a mathematical and technical discussion of a simple minimum retrofit of the single photodiode (PD) received signal strength (RSS) VLP systems is provided. Finally, the paper concludes with open challenges and a future roadmap for VLP.

Visible Light Communication (VLC) is a short-range optical wireless communication technology that has been gaining attention due to its potential to offload heavy data traffic from the congested radio wireless spectrum. At the same time, wireless communications are becoming crucial to smart manufacturing within the scope of Industry 4.0. Industry 4.0 is a developing trend of high-speed data exchange in automation for manufacturing technologies and is referred to as the fourth industrial revolution. This trend requires fast, reliable, low-latency, and cost-effective data transmissions with fast synchronizations to ensure smooth operations for various processes. VLC is capable of providing reliable, low-latency, and secure connections that do not penetrate walls and is immune to electromagnetic interference. As such, this paper aims to show the potential of VLC for industrial wireless applications by examining the latest research work in VLC systems. This work also highlights and classifies challenges that might arise with the applicability of VLC and visible light positioning (VLP) systems in these settings. Given the previous work performed in these areas, and the major ongoing experimental projects looking into the use of VLC systems for industrial applications, the use of VLC and VLP systems for industrial applications shows promising potential.

Within the context of the Internet of Things (IoT), many applications require high-quality positioning services. As opposed to traditional technologies, the two most recent positioning solutions: 1) ultra-wideband (UWB) and 2) (unmodulated) visible light positioning [(u)VLP] are well suited to economically supply centimeter-to-decimeter level accuracy. This manuscript benchmarks the 2-D positioning performance of an 8-anchor asymmetric double-sided two-way ranging (aSDS-TWR) UWB system and a 15-LED frequency-division multiple access (FDMA) received signal strength (RSS) (u)VLP system in terms of feasibility and accuracy. With extensive experimental data, collected at two heights in a 8 m by 6 m open zone equipped with a precise ground-truth system, it is demonstrated that both visible light positioning (VLP) and UWB already attain median and 90 ^th percentile positioning errors in the order of 5 and 10 cm in line-of-sight (LOS) conditions. An approximately 20-cm median accuracy can be obtained with uVLP, whose main benefit is it being infrastructureless and thus very inexpensive. The accuracy degradation effects of non-LOS (NLOS) on UWB/(u)VLP are highlighted with four scenarios, each consisting of a different configuration of metallic closets. For the considered setup, in 2-D and with minimal tilt of the object to be tracked, VLP outscores UWB in NLOS conditions, while for LOS scenarios similar results are obtained.

Whereas the impact of photodiode noise and reflections is heavily studied in Visible Light Positioning (VLP), an often underestimated deterioration of VLP accuracy is caused by tilt of the Light Emitting Diodes (LEDs). Small LED tilts may be hard to avoid and can have a significant impact on the claimed centimeter-accuracy of VLP systems. This paper presents a Monte-Carlo-based simulation study of the impact of LED tilt on the accuracy of Received Signal Strength (RSS)-based VLP for different localization approaches. Results show that trilateration performs worse than (normalized) Least Squares algorithms, but mainly outside the LED square. Moreover, depending on inter-LED distance and LED height, median tilt-induced errors are in the range between 1 and 6 cm for small LED tilts, with errors scaling linearly with the LED tilt severity. Two methods are proposed to estimate and correct for LED tilts and their performance is compared.

Optical Wireless Communication (OWC) is being explored for application in the next-generation broadcasting networks, where possessing accurately determined user locations becomes increasingly important. Received signal strength (RSS) Visible Light Positioning (VLP)-based localisation systems aim to deliver these centimetre-level location data at a low cost by featuring but a single photodiode (PD). Maximising the VLP accuracy requires optimising the LED transmitter locations, which is missing currently. An evolutionary optimisation algorithm is proposed to determine the optimal LED locations and the associated positioning error values for various configurations. The sensitivity of the planning on the number of VLP-enabled LEDs, the LEDs’ characteristics, the room dimensions and the positioning parameters is investigated. Experimental data, i.e., two datasets with 157 ² measurement points each, serve to validate the simulations.

In this paper, a novel three-dimensional (3D) indoor visible light positioning (VLP) algorithm using the Cayley–Menger determinant (CMD) with a cost function is proposed and experimentally tested to track a drone for industrial applications. The proposed algorithm uses optical received signal strength (RSS) for estimating the drone’s 3D position without prior knowledge of its height. This reduces the need for additional height sensors used in some 3D VLP systems. The performance of the proposed algorithm in terms of positioning error is also compared with a linear least squares (LLS) trilateration algorithm, with and without tilting of the receiver and with multipath reflections. The simulation results show that the proposed algorithm is more accurate and outperforms the LLS algorithm by a median improvement of 21% and is also more robust to the effect of tilting, as well as in the presence of multipath reflections. Furthermore, the proposed algorithm has been experimentally tested and compared with the LLS algorithm in a VLP test bed measuring 4 × 4 × 4.1 m ${}^3$ . The experimental results show that the median errors for LLS are 11.4 cm, while the median errors for CMD are 10.5 cm, which results in an error decrease of 8% when CMD with a cost function is used.