In order to more realistically reflect the penetrating and crushing process of a PELE (Penetration with Enhanced Lateral Efficiency) projectile, the stochastic failure algorithm and crack-softening algorithm were added to the corresponding material in this paper. According to the theoretical analysis of the two algorithms, the material failure parameters (stochastic constant γ, fracture energy Gf, and tensile strength σT) were determined. Then, four sets of simulation conditions ((a) no crack softening, (b) no stochastic failure, (c) no crack softening and no stochastic failure, and (d) crack softening and stochastic failure) were designed to qualitatively describe the influences of the failure algorithms, which were simulated by the finite element analysis software AUTODYN. The qualitative comparison results indicate that the simulation results after adding the two algorithms were closer to the actual situation. Finally, ten groups of simulation conditions were designed to quantitatively analyze the coincidence degree between the simulation results and the experimental results by means of two parameters: the residual velocity of the projectile and the maximum radial velocity of fragments. The results show that the simulation results coincide well with the experimental results and the errors were small. Therefore, the ideas proposed in this paper are scientific, and the conclusions obtained can provide guidance for engineering research.
The PELE (penetration with enhanced lateral efficiency) projectile is a new type of safe ammunition which can form a large number of fragments after perforating the target, and does not depend on any pyrotechnics. The damage characteristics of PELE projectile mainly include the penetration ability and fragmentation effect. There are many factors affecting the damage characteristics of PELE projectile, and this paper attempts to study the damage characteristics of PELE projectile, from the point of view of changing the single core material. Therefore, four different inner core combination types were designed in this paper, namely, zero gradient—I type (PE), zero gradient—II type (Al), positive gradient type (PE + Al), and negative gradient type (Al + PE). With the help of a more mature numerical simulation method, the studies were carried out from several aspects, such as the axial residual velocity of projectile, the radial scattering velocity of fragments, the radial scattering radius of fragments, and the residual length of projectile. The axial residual velocity of projectile can characterize the penetration ability of projectile, the radial scattering velocity and radial scattering radius of fragments can predict the damage area of fragments, and the residual length of projectile can reflect the fragment conversion rate of casing. The results indicate that the negative gradient inner core combination is superior to the other three combinations in terms of the penetration ability and fragmentation effect. Under the same impact velocity, the maximum radial velocity and radial scattering radius of fragments mainly depend on the front inner core material, and these two parameters will increase appropriately with the increase of the strength of front inner core material. Similarly, the residual length of projectile can be reduced, or the fragment conversion rate can be enhanced, by properly reducing the strength of rear inner core material. The conclusions obtained in this paper can provide a reference for engineering applications.
1 January 2019 in Journal of Applied Analysis & Computation
This paper presents a new class of protocols to solve finite-time consensus for multi-agent systems. The protocols are induced from the classical finite-time consensus algorithm by using the so-called protocol function. Sufficient conditions are established for networked agents to experience finite-time consensus under time-varying undirected and fixed directed topologies. Numerical simulations show that the proposed protocols can provide more flexibility to improve convergence rate.
The flocking problem of multi-agent systems with transmission delay is considered in this paper. We present a distributed flocking protocol and obtain a sufficient condition for the system to experience unconditional flocking by means of Lyapunov functional method. Numerical simulations are carried out to verify our theoretical results and also show that increasing delay may decrease the convergence rate of the system.
1 July 2022 in Applied Mathematics and Nonlinear Sciences
To study the command and control system in an island air defence system under the background of systemic conflict, this paper proposes a new modelling method based on the opinion dynamics leader-follower model to simulate the target threat assessment process in the command and control activities. Through example simulation, it is obtained that in a centralised command and control system, a command post (CP)-led model can provide the most accurate threat assessment results, but it consumes a longer time. While in a distributed command and control system, a model without a leader can provide a target threat value accurately and quickly. The consistency of simulation results and actual situation indicates that, at present, under a high degree of battlefield information sharing, it is necessary to down-pass the authority of the CP to improve operational efficiency. In summary, the proposed model can comprehensively reflect the process that the island air defence system assesses the threat of an attacking target, and it gives a new idea for investigating the command and control procedure and system of the island air defence system.