Addressing the impacts of climate change and global warming has become an urgent priority for the planet’s well-being. In recent decades the great potential of fungal-based products with characteristics equal to, or even outperforming, classic petroleum-derived products has been acknowledged. These new materials present the added advantage of having a reduced carbon footprint, less environmental impact and contributing to the shift away from a fossil-based economy. This study focused on the production of insulation panels using fungal mycelium and lignocellulosic materials as substrates. The process was optimized, starting with the selection of Trametes versicolor, Pleurotus ostreatus, P. eryngii, Ganoderma carnosum and Fomitopsis pinicola isolates, followed by the evaluation of three grain spawn substrates (millet, wheat and a 1:1 mix of millet and wheat grains) for mycelium propagation, and finishing with the production of various mycelium-based composites using five wood by-products and waste materials (pine sawdust, oak shavings, tree of heaven wood chips, wheat straw and shredded beech wood). The obtained biomaterials were characterized for internal structure by X-ray micro-CT, thermal transmittance using a thermoflowmeter and moisture absorption. The results showed that using a wheat and millet 1:1 (w/w) mix is the best option for spawn production regardless of the fungal isolate. In addition, the performance of the final composites was influenced both by the fungal isolate and the substrate used, with the latter having a stronger effect on the measured properties. The study shows that the most promising sustainable insulating biomaterial was created using T. versicolor grown on wheat straw.

COPPER COMPLEXES GRAFTED TO AMINO-FUNCTIONALIZED SILICA GEL AS WOOD PRESERVATIVES AGAINST FUNGAL DECAY: MINI-BLOCKS AND STANDARD TEST

Durability-based designs with timber require reliable information about the wood properties and how they affect its performance under variable exposure conditions. This study aimed at utilizing a material resistance model (Part 2 of this publication) based on a dose–response approach for predicting the relative decay rates in above-ground situations. Laboratory and field test data were, for the first time, surveyed globally and used to determine material-specific resistance dose values, which were correlated to decay rates. In addition, laboratory indicators were used to adapt the material resistance model to in-ground exposure. The relationship between decay rates in- and above-ground, the predictive power of laboratory indicators to predict such decay rates, and a method for implementing both in a service life prediction tool, were established based on 195 hardwoods, 29 softwoods, 19 modified timbers, and 41 preservative-treated timbers.

Service life planning with timber requires reliable models for quantifying the effects of exposure-related parameters and the material-inherent resistance of wood against biotic agents. The Meyer-Veltrup model was the first attempt to account for inherent protective properties and the wetting ability of wood to quantify resistance of wood in a quantitative manner. Based on test data on brown, white, and soft rot as well as moisture dynamics, the decay rates of different untreated wood species were predicted relative to the reference species of Norway spruce (Picea abies). The present study aimed to validate and optimize the resistance model for a wider range of wood species including very durable species, thermally and chemically modified wood, and preservative treated wood. The general model structure was shown to also be suitable for highly durable materials, but previously defined maximum thresholds had to be adjusted (i.e., maximum values of factors accounting for wetting ability and inherent protective properties) to 18 instead of 5 compared to Norway spruce. As expected, both the enlarged span in durability and the use of numerous and partly very divergent data sources (i.e., test methods, test locations, and types of data presentation) led to a decrease in the predictive power of the model compared to the original. In addition to the need to enlarge the database quantity and improve its quality, in particular for treated wood, it might be advantageous to use separate models for untreated and treated wood as long as the effect of additional impact variables (e.g., treatment quality) can be accounted for. Nevertheless, the adapted Meyer-Veltrup model will serve as an instrument to quantify material resistance for a wide range of wood-based materials as an input for comprehensive service life prediction software.

A novel treatment based on polyamidoamines (PAAs) for the preservation of wood against fungi and insects with a broad protection functionality, low effective concentration, and low environmental impact has been developed. PAAs were synthesized by nucleophile addition of ethanolamine (EtA) and/or 3-aminopropyltriethoxysilane (APTES) to N,N′-methylene-bisacrylamide (MBA). The molar ratios in the tested formulation were: I) MBA:EtA=1:1; II) MBA:APTES=1:1; III) MBA:EtA:APTES=1:0.5:0.5. These formulations, characterized by ESI-MS, NMR, FT-IR, were tested against: (a) the wood decay fungi (Coniophora puteana, Coriolus versicolor, and Poria placenta); (b) the subterranean termite Reticulitermes lucifugus, and the drywood termite Kalotermes flavicollis; (c) the woodborer Stegobium paniceum. Tests in combination with leaching showed that formulation II and III can be utilized as fungal wood preservatives for use classes 2–3 (EN 335:2013). In addition, all PAAs formulations were equally effective in preserving wood against the subterranean termite, and formulation II was most effective against drywood termite. On the other hand, the formulation I showed good efficacy against S. paniceum.