Flexible sensors have the potential to be seamlessly applied to soft and irregularly shaped surfaces such as the human skin or textile fabrics. This benefits conformability dependant applications including smart tattoos, artificial skins and soft robotics. Consequently, materials and structures for innovative flexible sensors, as well as their integration into systems, continue to be in the spotlight of research. This review outlines the current state of flexible sensor technologies and the impact of material developments on this field. Special attention is given to strain, temperature, chemical, light and electropotential sensors, as well as their respective applications.

Textiles enhanced with thin-film flexible sensors are well-suited for unobtrusive monitoring of skin parameters due to the sensors’ high conformability. These sensors can be damaged if they are attached to the surface of the textile, also affecting the textiles’ aesthetics and feel. We investigate the effect of embedding flexible temperature sensors within textile yarns, which adds a layer of protection to the sensor. Industrial yarn manufacturing techniques including knit braiding, braiding, and double covering were utilised to identify an appropriate incorporation technique. The thermal time constants recorded by all three sensing yarns was <10 s. Simultaneously, effective sensitivity only decreased by a maximum of 14% compared to the uncovered sensor. This is due to the sensor being positioned within the yarn instead of being in direct contact with the measured surface. These sensor yarns were not affected by bending and produced repeatable measurements. The double covering method was observed to have the least impact on the sensors’ performance due to the yarn’s smaller dimensions. Finally, a sensing yarn was incorporated in an armband and used to measure changes in skin temperature. The demonstrated textile integration techniques for flexible sensors using industrial yarn manufacturing processes enable large-scale smart textile fabrication.

The current state of the art in telemedicine has increased the interest in long term monitoring of physiological and bioelectric signals. This motivated the development of materials and techniques for the fabrication of biocompatible, user and environmentally friendly alternatives to conventional resistive wet electrodes. Here we report a method for the fabrication of dry flexible and stretchable electrodes based on Coconut-Oil and Carbon Black for the monitoring of electrophysiological signals without conductive gels. The highly stretchable material shows a specific resistance ρ down to 33.2±12.3Ωm, high conformability, and a stretchability up to 1500%. The epidermal electrodes were used to record Electrocardiographic (ECG) signals and measure respiration in a 3-lead configuration and compared to commercial wet electrodes. Even after being elongated by 100% for 100 stretch/release cycles, a reliable recording of the QRS-complex is demonstrated without the need for any contact enhancer or substances that cause skin reaction, demonstrating the potential use of this material for long term ECG monitoring applications.

Background: Scientific activity for 3D bioprinting has increased over the past years focusing mainly on fully functional biological constructs to overcome issues related to organ transplants. This research performs a scientometric analysis on bioprinting based on a competitive technology intelligence (CTI) cycle, which assesses scientific documents to establish the publication rate of science and technology in terms of institutions, patents or journals. Although analyses of publications can be observed in the literature, the identification of the most influential authors and affiliations has not been addressed. This study involves the analysis of authors and affiliations, and their interactions in a global framework. We use network collaboration maps and Betweenness Centrality (BC) to identify of the most prominent actors in bioprinting, enhancing the CTI analysis. Results: 2088 documents were retrieved from Scopus database from 2007 to 2017, disclosing an exponential growth with an average publication increase of 17.5% per year. A threshold of five articles with ten or more cites was established for authors, while the same number of articles but cited five or more times was set for affiliations. The author with more publications was Atala A. (36 papers and a BC = 370.9), followed by Khademhosseini A. (30 documents and a BC = 2104.7), and Mironov (30 documents and BC = 2754.9). In addition, a small correlation was observed between the number of collaborations and the number of publications. Furthermore, 1760 institutions with a median of 10 publications were found, but only 20 within the established threshold. 30% of the 20 institutions had an external collaboration, and institutions located in and close to the life science cluster in Massachusetts showed a strong cooperation. The institution with more publications was the Harvard Medical School, 61 publications, followed by the Brigham and Women’s hospital, 46 papers, and the Massachusetts Institute of Technology with 37 documents. Conclusions: Network map analysis and BC allowed the identification of the most influential authors working on bioprinting and the collaboration between institutions was found limited. This analysis of authors and affiliations and their collaborations offer valuable information for the identification of potential associations for bioprinting researches and stakeholders.